# Denon SC2000 Mixer Height

**URL:** <https://forum.djtechtools.com/t/denon-sc2000-mixer-height/77023>\
**Category:** Hardware: Controllers, Mods and Gear\
**Created:** [March 3, 2018, 1:05pm UTC](https://forum.djtechtools.com/t/denon-sc2000-mixer-height/77023 "2018-03-03T13:05:04Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Harryjrankin](https://avatars.discourse-cdn.com/v4/letter/h/da6949/32.png) [@Harryjrankin](https://forum.djtechtools.com/u/Harryjrankin)\
**Post date:** [March 3, 2018, 1:05pm UTC](https://forum.djtechtools.com/t/denon-sc2000-mixer-height/77023/1 "2018-03-03T13:05:04Z")

</div>

**Denon SC2000 Mixer Height**

Hi

Any ergonomic ideas for raising the height of a pair of Denon SC2000’s to external mixer height? So far have tried foam but it is less than ideal.

---

<div class="post-metadata">

**Author:** ![thisisian](https://avatars.discourse-cdn.com/v4/letter/t/9de053/32.png) [@thisisian](https://forum.djtechtools.com/u/thisisian)\
**Post date:** [March 5, 2018, 10:39am UTC](https://forum.djtechtools.com/t/denon-sc2000-mixer-height/77023/2 "2018-03-05T10:39:35Z")

</div>

[https://www.udggear.com/sale/udg-creator-denon-sc2000-hardcase-protector-silver](https://www.udggear.com/sale/udg-creator-denon-sc2000-hardcase-protector-silver)

Handy storage & should be approx the correct height with the SC2000 sat on top.

---

<div class="post-metadata">

**Author:** ![r08zy](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/r08zy/32/12443_2.png) [@r08zy](https://forum.djtechtools.com/u/r08zy)\
**Post date:** [March 13, 2018, 11:33am UTC](https://forum.djtechtools.com/t/denon-sc2000-mixer-height/77023/3 "2018-03-13T11:33:42Z")

</div>

When I had mine I used some 18mm MDF. Get a decent size sheet and cut the size of the controller you need, then with the offcuts, measure them out to the height you need minus 18mm for the top board and glue them on to the base to make some legs.

Sorry for the poor explanation, I have tried looking for a photo of them but can’t find one now.

---

<div class="post-metadata">

**Author:** ![bascurtiz](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bascurtiz/32/10387_2.png) [@bascurtiz](https://forum.djtechtools.com/u/bascurtiz)\
**Post date:** [March 25, 2018, 3:54pm UTC](https://forum.djtechtools.com/t/denon-sc2000-mixer-height/77023/4 "2018-03-25T15:54:44Z")

</div>

> [@Harryjrankin](#):
>
> Hi
> 
> Any ergonomic ideas for raising the height of a pair of Denon SC2000’s to external mixer height? So far have tried foam but it is less than ideal.

 ![denon-dn-sc2000-bottom1.jpg](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/5/4/54c0aacb9578b4e73536c2aa17c9c11701c6bbd9.jpeg)

 ![denon-dn-sc2000-bottom2.jpg](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/9/2/92df789888671d99a773384b78531280144ddc75.jpeg)

That’s double-sided tape + wood +/- 1,5mm paintsprayed in black.  
The Denons are the exact height as my Traktor S8 now, but ideally I’d add a rubber mat underneath those 2 wooden pieces, so they don’t move when riding the pitchfader. Or cut a mousemat into 2 pieces the same size.