# Denon Sc2000 UDG Creator hard case

**URL:** <https://forum.djtechtools.com/t/denon-sc2000-udg-creator-hard-case/39294>\
**Category:** Hardware: Controllers, Mods and Gear\
**Tags:** udg-case-sc2000-mixer\
**Created:** [March 15, 2012, 5:14am UTC](https://forum.djtechtools.com/t/denon-sc2000-udg-creator-hard-case/39294 "2012-03-15T05:14:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mustache](https://avatars.discourse-cdn.com/v4/letter/m/db5fbb/32.png) [@Mustache](https://forum.djtechtools.com/u/Mustache)\
**Post date:** [March 15, 2012, 5:14am UTC](https://forum.djtechtools.com/t/denon-sc2000-udg-creator-hard-case/39294/1 "2012-03-15T05:14:23Z")

</div>

**Denon Sc2000 UDG Creator hard case**

Does anyone have experience with this case? I was hoping it was solid enough to set the controller on to elevate it to mixer height. If not, I’m going to be building some custom raiser for it.

---

<div class="post-metadata">

**Author:** ![HarryK](https://avatars.discourse-cdn.com/v4/letter/h/8797f3/32.png) [@HarryK](https://forum.djtechtools.com/u/HarryK)\
**Post date:** [March 15, 2012, 12:44pm UTC](https://forum.djtechtools.com/t/denon-sc2000-udg-creator-hard-case/39294/2 "2012-03-15T12:44:39Z")

</div>

I’m interested as well. If anyone has any info, please share it with us.

---

<div class="post-metadata">

**Author:** ![Mustache](https://avatars.discourse-cdn.com/v4/letter/m/db5fbb/32.png) [@Mustache](https://forum.djtechtools.com/u/Mustache)\
**Post date:** [March 15, 2012, 2:29pm UTC](https://forum.djtechtools.com/t/denon-sc2000-udg-creator-hard-case/39294/3 "2012-03-15T14:29:33Z")

</div>

I checked the dimensions and the height of the case plus the height of the controller comes out to 85mm. My mixer sits 86mm high, which is close enough. I just want to know if the case is solid enough for some button mashing. If not, I’m going to work on a sexy dark wood casing for it to sit in to be flush with a standard mixer