# Getting a silver Xone 92 this week, graphite faceplate? **URL:** \ **Category:** General Discussion\ **Created:** [March 2, 2013, 6:48pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047 "2013-03-02T18:48:38Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\ **Post date:** [March 2, 2013, 6:48pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/1 "2013-03-02T18:48:38Z")
**Getting a silver Xone 92 this week, graphite faceplate?** In getting a Xone 92 this week, the light silver one. But really really want the graphite one, looks super dope. Is there any difference between the two other then the obvious, colour? I’m willing to get the graphite faceplate, as long as it isn’t to pricey, I’m just wondering if that is possible to do, like is it laid out differently anything in a different place or will it fit fine? Also is this am easy process, or is it not as simple as u screwing, lifting off, and screwing the new one on…? ---
**Author:** ![padi\_04](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/padi_04/32/56291_2.png) [@padi\_04](https://forum.djtechtools.com/u/padi_04)\ **Post date:** [March 2, 2013, 8:02pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/2 "2013-03-02T20:02:10Z")
[http://xoneforum.allen-heath.com/forum\_posts.asp?TID=3583&title=xOne92-uk-vs-xOne92-china](http://xoneforum.allen-heath.com/forum_posts.asp?TID=3583&title=xOne92-uk-vs-xOne92-china) ---
**Author:** ![Jeff\_Scott](https://avatars.discourse-cdn.com/v4/letter/j/85e7bf/32.png) [@Jeff\_Scott](https://forum.djtechtools.com/u/Jeff_Scott)\ **Post date:** [March 2, 2013, 10:24pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/3 "2013-03-02T22:24:00Z")
On Allen and Heaths the PCBs (Printed Circuit Boards) are attached to the back of the faceplate so its not as simple as unscrewing the visible screws on the faceplate and swapping it over. ![xonedx_inside](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/f/c/fcbc51d6639e32962620f6678da2a0ea5140ebcb.jpeg) Thats a Xone DX but is the same on a 62 and i’d imagine a 92 swell ---
**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\ **Post date:** [March 3, 2013, 6:52pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/4 "2013-03-03T18:52:55Z")
Ahh. So if I have never done this kind of thing before, I shouldn’t risk posing it myself? I do not want to break anything man.. I just really want that dark grey colour faceplate! 😞 ---
**Author:** ![Jeff\_Scott](https://avatars.discourse-cdn.com/v4/letter/j/85e7bf/32.png) [@Jeff\_Scott](https://forum.djtechtools.com/u/Jeff_Scott)\ **Post date:** [March 3, 2013, 7:06pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/5 "2013-03-03T19:06:48Z")
To be honest its a combination of pozi and torx screws, a nut around each pot and ribbon cable removal then the opposite way to the other faceplate, there may also be a small bit of soldering not 100%. If your not confident in doing it I wouldn’t if I was you. Il agree the dark grey one is nicer than the light grey one aswell ---
**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\ **Post date:** [March 3, 2013, 7:08pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/6 "2013-03-03T19:08:53Z")
> [@Jeff\_Scott](#): > > To be honest its a combination of pozi and torx screws, a nut around each pot and ribbon cable removal then the opposite way to the other faceplate, there may also be a small bit of soldering not 100%. > > If your not confident in doing it I wouldn’t if I was you. > > Il agree the dark grey one is nicer than the light grey one aswell I have no idea what any of this means.. Lol. Yeah that’s the thing I’m definitely not confident in doing this myself, and I’m sure it’ll cost a lot to buy the faceplate AND hire someone else to remove and place it… Yeah! The dark grey one looks really cool and new, ill wait until my 92 arrives and see how much I like the silver, but I really would like the grey case! 😞 ---
**Author:** ![crumarbit](https://avatars.discourse-cdn.com/v4/letter/c/9e8a1a/32.png) [@crumarbit](https://forum.djtechtools.com/u/crumarbit)\ **Post date:** [March 9, 2013, 10:39pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/7 "2013-03-09T22:39:45Z")
Just gone for a 92 as well and picking it up on Monday (also light grey) and i am ordering this: > **[Chemical Ltd - Records | CDs | MP3s | Clothing | DJ Equipment](https://www.chemical-records.co.uk/sc/servlet/info?Track=AA7581)** > > Worldwide mail order service for Vinyl, CDs, MP3s, Clothing and DJ/Home Audio Equipment I don’t mind having a play about with electronics so will let you know how it goes. Also, expect a message soon asking for advice on how to fix a taken apart 92 ha! ---
**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\ **Post date:** [March 10, 2013, 8:59pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/8 "2013-03-10T20:59:56Z")
> [@crumarbit](#): > > Just gone for a 92 as well and picking it up on Monday (also light grey) and i am ordering this: > > [Chemical Ltd - Records | CDs | MP3s | Clothing | DJ Equipment](http://www.chemical-records.co.uk/sc/servlet/Info?Track=AA7581) > > I don’t mind having a play about with electronics so will let you know how it goes. Also, expect a message soon asking for advice on how to fix a taken apart 92 ha! Okay let me know how it goes!! I reeeeally want the dark grey graphite faceplate, I just would to know how to do it! 😞 ---
**Author:** ![nem0nic](https://avatars.discourse-cdn.com/v4/letter/n/c57346/32.png) [@nem0nic](https://forum.djtechtools.com/u/nem0nic)\ **Post date:** [March 11, 2013, 2:16pm UTC](https://forum.djtechtools.com/t/getting-a-silver-xone-92-this-week-graphite-faceplate/54047/9 "2013-03-11T14:16:27Z")
If you’re not at all handy and want to change the look of your faceplate, you may also be interested in services like StyleFlip. They offer a durable 3M cover for your faceplate that changes the look completely. The feel of the material is a lot like the Mylar used on mixers like the Rane TTM57. > **[Style Flip: DJ Skins, Pro Audio Skins, iPod Skins, Laptop Skins, Keyboard Skins](https://www.styleflip.com/)** > > We sell custom decal skins for DJ and Pro Audio gear, iPhones, laptops, keyboards and more. Upload and create your own custom skin decal today! > **[Allen & Heath XONE 92 Skin, Decals, Covers & Stickers. Buy custom...](https://www.styleflip.com/allen-heath-xone-92-skins-custom-sticker-covers)** > > Create your custom Allen & Heath XONE 92 skins, decals, covers, & stickers today at StyleFlip.com! Buy online & ship worldwide. Choose from 600+ devices and customize your skin now!