# Has anyone found a good case for the VCI-100? **URL:** \ **Category:** DJ TechTools' VCI-100 Product Support\ **Created:** [February 4, 2011, 4:12pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334 "2011-02-04T16:12:38Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![virtuexru](https://avatars.discourse-cdn.com/v4/letter/v/a6a055/32.png) [@virtuexru](https://forum.djtechtools.com/u/virtuexru)\ **Post date:** [February 4, 2011, 4:12pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/1 "2011-02-04T16:12:38Z")
**Has anyone found a good case for the VCI-100?** I found the VCI-300 case/laptop deck combo and thought that would be an awesome product however searching all over Google really gave me limited results as to a VCI-100 case. ---
**Author:** ![Colas](https://avatars.discourse-cdn.com/v4/letter/c/a8b319/32.png) [@Colas](https://forum.djtechtools.com/u/Colas)\ **Post date:** [February 5, 2011, 2:15am UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/2 "2011-02-05T02:15:28Z")
I’ve been trying to figure out the same thing after recent acquisition of a VCI-100 Arcade. Depending on where you live, you have a few options (that i’ve found myself) Decksaver (usually the only case on eBay) Simple hardcase Vestax sleeve There are then of course countless backpacks that could be compatible with the VCI-100 since it’s not very big. However, I already have a large backpack (Timbuk2 Hemlock) that would be perfect if I just had a way to protect my controller- and these are what I’ve come across so far. Hope this helps! ---
**Author:** ![No\_Left\_Turn](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/no_left_turn/32/13374_2.png) [@No\_Left\_Turn](https://forum.djtechtools.com/u/No_Left_Turn)\ **Post date:** [February 5, 2011, 4:34am UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/3 "2011-02-05T04:34:36Z")
I have the DeckSaver case and it does the job extremely well. It doesn’t ever cross my mind that something’s going to happen to the knobs/faders/buttons when I have that covering my VCI in my bag. ---
**Author:** ![Benzi](https://avatars.discourse-cdn.com/v4/letter/b/ac8455/32.png) [@Benzi](https://forum.djtechtools.com/u/Benzi)\ **Post date:** [February 6, 2011, 7:48pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/4 "2011-02-06T19:48:48Z")
You could pretty much modify any VCI-300 Case because the VCI-100 is slightly smaller and some extra padding on the sides is what I did to make up the extra space ---
**Author:** ![marc.elektro](https://avatars.discourse-cdn.com/v4/letter/m/bb73d2/32.png) [@marc.elektro](https://forum.djtechtools.com/u/marc.elektro)\ **Post date:** [March 16, 2011, 6:58pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/5 "2011-03-16T18:58:21Z")
> [@No\_Left\_Turn](#): > > I have the DeckSaver case and it does the job extremely well. It doesn’t ever cross my mind that something’s going to happen to the knobs/faders/buttons when I have that covering my VCI in my bag. Hey No Left Turn do you use a Mono EFX Kondenser bag? I was just curious because I ordered a VCI-100 and want to know if it will fit with a decksaver and laptop in the main bag compartment? Thanks. ---
**Author:** ![RD444](https://avatars.discourse-cdn.com/v4/letter/r/ce7236/32.png) [@RD444](https://forum.djtechtools.com/u/RD444)\ **Post date:** [March 20, 2011, 4:39pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/6 "2011-03-20T16:39:18Z")
[http://www.ultimate-dj-gear.com/shop/product.asp?s=D9FFB40283AE4EDE8000EA5B3615BAB3&pid=1374](http://www.ultimate-dj-gear.com/shop/product.asp?s=D9FFB40283AE4EDE8000EA5B3615BAB3&pid=1374) UDG Midi Controller Bag 🙂 [![](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/3/a/3af9ca742b6918fec6cd05195eeb2d724f2130c4.jpeg "Shoulder Bags for the VCi-300 (Magma and UDG)") ](https://www.youtube.com/watch?v=-DKbfhNF4bM) ---
**Author:** ![giftwho](https://avatars.discourse-cdn.com/v4/letter/g/eb8c5e/32.png) [@giftwho](https://forum.djtechtools.com/u/giftwho)\ **Post date:** [April 18, 2011, 5:34pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/7 "2011-04-18T17:34:42Z")
This is what I use for my VCI-100, it’s very good quality and u can put in it everything except headphones 🙂 [http://www.decks.de/decks-sess/workfloor/details/details\_zub.php?wo=zub&code=btn-10](http://www.decks.de/decks-sess/workfloor/details/details_zub.php?wo=zub&code=btn-10) ---
**Author:** ![djkevind](https://avatars.discourse-cdn.com/v4/letter/d/f17d59/32.png) [@djkevind](https://forum.djtechtools.com/u/djkevind)\ **Post date:** [May 16, 2011, 3:49am UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/8 "2011-05-16T03:49:58Z")
I use the odyssey case for the Hercules rmx, you do have to trim the foam on the sides slightly but will fit nice. This is the link where you can buy one. [Odyssey FZGSRMX | DJ Cases | DJ Controller Cases | 123dj.com](http://123dj.com/cases/musicproduction/fzgsrmx.html) In this video you can see mine. [http://djportaltv.com/video/d3rkin-scratching-vci-100-se-after-firmware-upgrade-14](http://djportaltv.com/video/d3rkin-scratching-vci-100-se-after-firmware-upgrade-14) ---
**Author:** ![DirtyDeluxe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/dirtydeluxe/32/13838_2.png) [@DirtyDeluxe](https://forum.djtechtools.com/u/DirtyDeluxe)\ **Post date:** [May 26, 2011, 12:22pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/9 "2011-05-26T12:22:12Z")
My VCI fits perfectly into a cheapish Targus laptop case (even with the decksaver lid on). I already had the bag, was amazed it fitted so well. There is just space for a few cables in the internal and outside flap. I could get the model number off the tag if anyone wants to know. I think it may be this one but don’t quote me yet: [ame=“[Targus Notepac Notebook bag (Black) Ref: CN01: Amazon.co.uk: Everything Else](http://www.amazon.co.uk/Targus-Notepac-Notebook-bag-Black/dp/B00004Z6N0/ref=sr_1_12/280-9210626-6236640?ie=UTF8&qid=1250281484&sr=8-12?ie=UTF8&tag=laptopbagsuk-21)”]Targus Notepac Notebook bag Ref: CN01: [Amazon.co.uk](http://Amazon.co.uk): Electronics@@AMEPARAM@@[http://ecx.images-amazon.com/images/I/41Jzcb8YrqL.@@AMEPARAM@@41Jzcb8YrqL[/ame]](http://ecx.images-amazon.com/images/I/41Jzcb8YrqL.@@AMEPARAM@@41Jzcb8YrqL%5B/ame%5D) ---
**Author:** ![JesC](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jesc/32/10376_2.png) [@JesC](https://forum.djtechtools.com/u/JesC)\ **Post date:** [May 26, 2011, 8:41pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/10 "2011-05-26T20:41:53Z")
if your looking for a case for a vci-100 check out the marathon flight case for a hercules RMX ---
**Author:** ![eskimo\_joe](https://avatars.discourse-cdn.com/v4/letter/e/bbe5ce/32.png) [@eskimo\_joe](https://forum.djtechtools.com/u/eskimo_joe)\ **Post date:** [May 27, 2011, 12:23am UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/11 "2011-05-27T00:23:20Z")
I really like the Mono EFX Kondensor bag. Fits my laptop, Audio 4 DJ, and more perfectly. It was a bit pricey but I got it on sale and it feels like a quality way to protect your equipment investment. [http://www.monocase.com/mono-efx-kondensor.asp](http://www.monocase.com/mono-efx-kondensor.asp) ---
**Author:** ![Boogo](https://avatars.discourse-cdn.com/v4/letter/b/df788c/32.png) [@Boogo](https://forum.djtechtools.com/u/Boogo)\ **Post date:** [June 4, 2011, 7:15am UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/12 "2011-06-04T07:15:40Z")
**Has anyone found a good case for the VCI-100?** I use a standard laptop rucksack for my laptop, sound card & leads & a hard case with foam for the VCI-100 which you can pick up at any good camera retailers for around £40 - £50. 4 reasons I prefer a hard case to bag/rucksack for VCI-100 storage 1. It’s far more robust and provides more protection for the VCI-100 than a bag when travelling 2. Doubles as a handy riser/stand when doing gigs in venues with low tables 3. Looks more professional when you arrive at gigs 4. Cheaper than most rucksack solutions ---
**Author:** ![pARtybOy](https://avatars.discourse-cdn.com/v4/letter/p/7c8e57/32.png) [@pARtybOy](https://forum.djtechtools.com/u/pARtybOy)\ **Post date:** [July 2, 2011, 10:54pm UTC](https://forum.djtechtools.com/t/has-anyone-found-a-good-case-for-the-vci-100/19334/13 "2011-07-02T22:54:02Z")
hi, I use a toolbox case for some years to carry my gear around,my old BCD200 could fit in there,then after I bought the VCI-100 I can also squeeze my headphones in there too😉 plus USBcables,Audio 2 DJ,Laptop+Power Adapter, bought it at a local toolshop megastore called MaxMat,for about 30€,I guess this is a great lowcost solution!