# Hotcue LEDS won't go out

**URL:** <https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685>\
**Category:** Controller Mappings\
**Tags:** led, mapping, hotcue\
**Created:** [September 1, 2012, 10:34pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685 "2012-09-01T22:34:46Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Perdut](https://avatars.discourse-cdn.com/v4/letter/p/34f0e0/32.png) [@Perdut](https://forum.djtechtools.com/u/Perdut)\
**Post date:** [September 1, 2012, 10:34pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/1 "2012-09-01T22:34:46Z")

</div>

**Hotcue LEDS won’t go out**

Hi guys,

If been searching now for hours 😡 on this and I just can’t figure it out (since they changed from Hotcue State).  
I map my Hot cues and LED’s and they work fine. When I store a hot cue, the LED turns on, all fine there. The problem is when I delete the hot cue the LED won’t turn off 😱

Anyone can tell me what exactly I’ve got to do to get this fixed. I must miss something but I can’t seem to figure out what.

Thx for your help.

Yoeri.

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [September 2, 2012, 11:18am UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/2 "2012-09-02T11:18:32Z")

</div>

It’s changed like many commands in 2.5

Add out \> Track deck \> Cue \> Hotcue # type

---

<div class="post-metadata">

**Author:** ![Perdut](https://avatars.discourse-cdn.com/v4/letter/p/34f0e0/32.png) [@Perdut](https://forum.djtechtools.com/u/Perdut)\
**Post date:** [September 2, 2012, 11:50am UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/3 "2012-09-02T11:50:22Z")

</div>

Hi Stewe,

That’s exactly what I did but it doesn’t work, that’s what drives me nuts.  
Here’s one of the versions I’ve tried. Can you see what I’ve done wrong ?

 ![Schermafbeelding 2012-09-02 om 13.47.23.png](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/5/2/5260cb5e3bfcb000cb74077e5d02c718cfaf943d.png)

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [September 2, 2012, 11:53am UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/4 "2012-09-02T11:53:17Z")

</div>

Hm.. Try adding M1=0 as condition for LED type same as you did for store hotcues.

---

<div class="post-metadata">

**Author:** ![Perdut](https://avatars.discourse-cdn.com/v4/letter/p/34f0e0/32.png) [@Perdut](https://forum.djtechtools.com/u/Perdut)\
**Post date:** [September 3, 2012, 1:28pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/5 "2012-09-03T13:28:30Z")

</div>

Done that… nope. Not working. Arrrgghh… I’ve seen it working so it must be something that I’m doing wrong.

---

<div class="post-metadata">

**Author:** ![photojojo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/photojojo/32/14618_2.png) [@photojojo](https://forum.djtechtools.com/u/photojojo)\
**Post date:** [September 3, 2012, 1:42pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/6 "2012-09-03T13:42:15Z")

</div>

Try deleting the commands and mapping them again.

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [September 3, 2012, 1:47pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/7 "2012-09-03T13:47:22Z")

</div>

Also make sure to set midi In/Out port to your controller.

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [September 3, 2012, 2:07pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/8 "2012-09-03T14:07:07Z")

</div>

Did you set range for hotcue type?

Controller range 0-0  
Midi range 0-127

No blend checked.

---

<div class="post-metadata">

**Author:** ![Yul](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/yul/32/13542_2.png) [@Yul](https://forum.djtechtools.com/u/Yul)\
**Post date:** [September 3, 2012, 2:34pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/9 "2012-09-03T14:34:16Z")

</div>

try adding a sending monitor state command twice, one normal, one set to invert.

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [September 3, 2012, 5:37pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/10 "2012-09-03T17:37:01Z")

</div>

My hotcues are assigned to buttons which doesn’t support LED output so I didn’t actually mess with hotcue outputs in 2.5 but I knew it was renamed.

So i tried to troubleshoot it and see what is the problem there. I added only one output for “hotcue # tupe” and it worked. Thing was with controller range, I started from 0-0 and it lite properly.

---

<div class="post-metadata">

**Author:** ![Perdut](https://avatars.discourse-cdn.com/v4/letter/p/34f0e0/32.png) [@Perdut](https://forum.djtechtools.com/u/Perdut)\
**Post date:** [September 3, 2012, 9:01pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/11 "2012-09-03T21:01:52Z")

</div>

Works… !!! My initial settings were correct it was just the settings in the ranges like Stewe said. Thx guys.

PS. You know… this is now finally working and WITHOUT changing other parameters, for some reason now, the feedback to the PLAY buttons don’t work correct anymore. I press ‘play’ and the light won’t turn on immediatly. If I press the programmed ‘status’ button it pops up straight away. If I Pause/Stop the track it just goes out as supposed to.

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [September 3, 2012, 10:24pm UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/12 "2012-09-03T22:24:13Z")

</div>

> [@Perdut](#):
>
> Works… !!! My initial settings were correct it was just the settings in the ranges like Stewe said. Thx guys.
> 
> PS. You know… this is now finally working and WITHOUT changing other parameters, for some reason now, the feedback to the PLAY buttons don’t work correct anymore. I press ‘play’ and the light won’t turn on immediatly. If I press the programmed ‘status’ button it pops up straight away. If I Pause/Stop the track it just goes out as supposed to.

Only LED doesn’t lite up correctly? Does it plays and pauses normally?

---

<div class="post-metadata">

**Author:** ![Perdut](https://avatars.discourse-cdn.com/v4/letter/p/34f0e0/32.png) [@Perdut](https://forum.djtechtools.com/u/Perdut)\
**Post date:** [September 4, 2012, 5:36am UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/13 "2012-09-04T05:36:50Z")

</div>

Oh yeah… it functions correctly, it’s just those bloody LED’s or feedback.  
I see that I haven’t mentioned it before but I’m creating a whole mapping for the iPad (TouchOSC) to my likes.

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [September 4, 2012, 10:40am UTC](https://forum.djtechtools.com/t/hotcue-leds-wont-go-out/46685/14 "2012-09-04T10:40:25Z")

</div>

Try to delete Play button LED output and map it again. No blend checked.
