# Idea for a TOUCH-sensor based Midi Fighter...

**URL:** <https://forum.djtechtools.com/t/idea-for-a-touch-sensor-based-midi-fighter/67007>\
**Category:** Midi Fighters\
**Tags:** idea, midi-fighter-touch, touch-pad\
**Created:** [July 9, 2014, 1:31am UTC](https://forum.djtechtools.com/t/idea-for-a-touch-sensor-based-midi-fighter/67007 "2014-07-09T01:31:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![UoPoko](https://avatars.discourse-cdn.com/v4/letter/u/c67d28/32.png) [@UoPoko](https://forum.djtechtools.com/u/UoPoko)\
**Post date:** [July 9, 2014, 1:31am UTC](https://forum.djtechtools.com/t/idea-for-a-touch-sensor-based-midi-fighter/67007/1 "2014-07-09T01:31:28Z")

</div>

**Idea for a TOUCH-sensor based Midi Fighter…**

This is a design concept for a model of Midi Fighter that uses Touch Sensors (capacitive resistance) instead of arcade buttons. I know the Sanwa buttons are great and they’re rated for 5 million presses, but in my experience, at some point those buttons do get gummed up and start sticking. And trust me, they -do- run into this problem sooner or later.

https://www.youtube.com/embed/RT222eXTBNY?feature=oembed&wmode=opaque

> **[Sticky button on Midi Fighter 3D :(](https://forum.djtechtools.com/showthread.php?t=75828)**
>
> Hi there, 
>  
> I just received my Midi Fighter 3D in the post and one of the buttons sticks for 2-3 seconds before releasing and when it releases I get a slight static sound from the way the audio cuts on what I am playing which is weird as its just...

(^ Forum post and video concerning “stuck” buttons.)

The touch sensors would basically be the same thing as what’s on most laptops, the mouse pad part… there are places to get these from so I can’t imagine it being very hard to create a device like this.

What are the benefits of touch sensors vs. buttons or rubber pads?

- Touch is instant and always the same, imagine (or try) finger-dancing on an imaginary drumpad on your computer desk). You don’t really need to be forceful like with most Akai-ish pads (I replaced the pads on my MPD18 with Thick Fat Pads from MPC stuff and added in their corx and it’s -still- hard to get a hit sometimes, resulting in a ‘miss’). Arcade buttons sit on springs, good springs yes, but they’re not always of 100% equal height.

- Laptop mouse pad sensors have X / Y tracking, so there’s more potential in that than just a simple binary button.

- A flat surface is easy to clean, just look at most Flat Top stoves. If there’s no gaps, there’s no way for dirt, animal hair, etc to get inside your switches and mess things up.

Matías responded to my idea via email and said something about “drumming on a hard surface isn’t good for your fingers.” Well, the way I see it is kind of like the old Turbo Touch 360 controllers for the Original Nintendo, Super NES and Sega Genesis. Most kids who got those things started out being forceful with them, because they were expecting a typical D-Pad with moving parts, but after adjusting to it and realizing “it’s a Capacitive Restiance touch sensor, I don’t ~need~ to be aggressive with it, I just need to gently touch it.” it was more fun to use, at least it was for me when I still had mine for my NES. I also have never experienced an injury from merely ‘finger dancing’ on my desk, lol.

What kind of features would this device have?:

- All rubber outer case except for the top (similar to the “legged” case used by the Midi Fighter 3D, no more plastic bottom plate to accidentally break)

- 16 -square- shaped laptop style mouse sensor pads… (capactive touch sensor)  
Seen here ~ [Touchpad Circuit Board TM41PDG351-1, 920-000194-01 A Clevo D620S Touchpad / Track Point / Track Ball. PcHub.com - Laptop parts , Laptop spares , Server parts & Automation](http://www.pchub.com/uph/laptop/70-61260-16502/Clevo-D620S-Touchpad-Track-Point-Track-Ball.html)

- Lighting is achieved by using a clear plastic trim bordering each laptop mouse sensor pad, with an LED under that to provide illumination.

- 4 “Bank Switch” buttons at the -top- of the controller (where the USB cord comes out,  
instead of at the bottom, like the MF3D).

-

- A “Note Repeat” button (like the one found on the Akai MPD18, allowing for fast, repeating hits, can be turned on or off by the Pink button next to the Bank buttons.

- 3 modes of use…

“Single Note - Full” ~ treats each of the laptop mouse sensor pads as a single midi note, each hit is at level 127 (like turning on the Full Level setting on the Akai MPD18 - no velocity variance), activated / indicated by the Green side button.

“Single Note - Expressive” ~ uses the X / Y of the laptop mouse pads to add velocity variance to your playing, a center hit is highest velocity, hits outside of center are lower in velocity, this mode is activated / indicated by the Blue side button (this arrangement mimics the way clicking on a pad in Reason’s “Kong” virtual drum machine works).

“Chaos Mode” ~ this treats all of the 16 laptop mouse sensor pads like a Korg Kaoss™ Pad, the X / Y can be used for phase sweeps or expressive instrument sliding, mode is activated / indicated by the Red side button.

I think a device like this has a good potential, I really hope someone at DJTT sees this… I mean, if something like the MF Twister can be seen and made a reality, surely this could too.

---

<div class="post-metadata">

**Author:** ![UoPoko](https://avatars.discourse-cdn.com/v4/letter/u/c67d28/32.png) [@UoPoko](https://forum.djtechtools.com/u/UoPoko)\
**Post date:** [July 9, 2014, 10:44am UTC](https://forum.djtechtools.com/t/idea-for-a-touch-sensor-based-midi-fighter/67007/2 "2014-07-09T10:44:08Z")

</div>

Now this is what I’m talkin’ about…  
[http://scottmetoyer.com/radix16-laptop-touchpad-matrix-midi-controller/](http://scottmetoyer.com/radix16-laptop-touchpad-matrix-midi-controller/)

Video of the device being played.

[![](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/6/f/6f1b6b14b91407c579ff016a9b911a0eb3c0f9fd.jpeg "RADIX16 MIDI controller pad test") ](https://www.youtube.com/watch?v=X0AUrA_6aCM)

Place to get the touchpad assemblies from…

> **[Clevo D620S Touchpad / Track Point / Track Ball TM41PDG351-1, Touchpad Only](https://www.pchub.com/clevo-d620s-touchpad-track-point-track-ball-tm41pdg351-1-touchpad-only-p61260)**
>
> Touchpad Circuit Board TM41PDG351-1, 920-000194-01 A Clevo D620S Touchpad / Track Point / Track Ball

(The pads in the above link are perfectly -square- and not rectangular like the ones in the image below).

If this guy can do it, surely DJ TechTools could as well.

---

<div class="post-metadata">

**Author:** ![Stormcaller](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stormcaller/32/12249_2.png) [@Stormcaller](https://forum.djtechtools.com/u/Stormcaller)\
**Post date:** [July 16, 2014, 8:50pm UTC](https://forum.djtechtools.com/t/idea-for-a-touch-sensor-based-midi-fighter/67007/3 "2014-07-16T20:50:27Z")

</div>

If you are gonna do that, you might as well use an ipad running TouchOSC. I use external controllers because I need to feel the controls. I only keep my ipad as a backup in a live situation and it isn’t pleasant trying to use it. It is really really easy to brush against it with the wrong part of your hand and accidentally trigger something and mess up the set.

---

<div class="post-metadata">

**Author:** ![UoPoko](https://avatars.discourse-cdn.com/v4/letter/u/c67d28/32.png) [@UoPoko](https://forum.djtechtools.com/u/UoPoko)\
**Post date:** [July 16, 2014, 9:03pm UTC](https://forum.djtechtools.com/t/idea-for-a-touch-sensor-based-midi-fighter/67007/4 "2014-07-16T21:03:36Z")

</div>

I don’t want to use an iPhone, or a Droid phone, though… that’s a bit too small for my taste.  
No, what I am suggesting would basically be like an Akai MPD 18 but with touch panels…

Did you look at the video of the other guy’s creation???

[![](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/6/f/6f1b6b14b91407c579ff016a9b911a0eb3c0f9fd.jpeg "RADIX16 MIDI controller pad test") ](https://www.youtube.com/watch?v=X0AUrA_6aCM)

^What he has there is basically 16 Korg Kaos pads.  
Yeah, they’re laptop sensors, but with what he did  
that is essentially what he has…

Now, even if you dumbed that down and it was just metal plates  
that used bio capacitance to sense your fingers, like this thing…

[![](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/a/5/a5c47e2571bf397e4048a2a3f870b9b4098a0c56.jpeg "Touch MIDI Controller Prototype") ](https://www.youtube.com/watch?v=cCaz-FatU4U)

I still think that would have advantages over the Sanwa buttons  
and Akai’s pressure sensitive membrane (what is under the pads  
in an Akai MPD 18), touch is more instant… with the buttons, there  
is travel, time it takes before the button is triggered, some of the  
buttons trigger at a different height. That and the buttons can  
get ~stuck~ like the other video showed… (and what also  
happened to mine, the button took a while to pop out  
like something was interfering with the spring mechanism).

Akai pads also don’t always measure a hit…  
unless you’re being super forceful, imo.

Those touch plates would ensure that every  
button has the same point at which it gets  
triggered, they could never get “stuck.”  
And hits would not ever be “missed.”

Personally I think it’s a novel idea, whether or not  
you have the X / Y capabilities of the mousepad sensors.
