# little problem mapping FX on Traktor

**URL:** <https://forum.djtechtools.com/t/little-problem-mapping-fx-on-traktor/78068>\
**Category:** Controller Mappings\
**Created:** [October 20, 2019, 10:11am UTC](https://forum.djtechtools.com/t/little-problem-mapping-fx-on-traktor/78068 "2019-10-20T10:11:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tintirintin](https://avatars.discourse-cdn.com/v4/letter/t/71e660/32.png) [@tintirintin](https://forum.djtechtools.com/u/tintirintin)\
**Post date:** [October 20, 2019, 10:11am UTC](https://forum.djtechtools.com/t/little-problem-mapping-fx-on-traktor/78068/1 "2019-10-20T10:11:01Z")

</div>

**little problem mapping FX on Traktor**

I am using F1 on MIDI mode to map some effects, the idea is just tapping on one button and the effect goes on instantly.

What I do is adding the following mapping for each controller-button I want to trigger an effect:

1. Effect Selector - to choose the effect
2. Knob - to select the know position
3. Button (FX button) - to activate the effect (both HALT and DIRECT mode)

The problem I face is that the mapping actually does the job, BUT not quite:

- If I used the same effect immediately before, it works well.
- If another preset is selected and the Button (Fx button for ON OFF) is off, when I press the button of the effect gets selected but the on off button gets active just for an instant
- Then if I use it again or if I double tap then it works well

Since the problem seems bit difficult to explain I added a video (gif) to show this weird behaviour:  
In the gif first I tap 3 times the same effect and you can see how all 3 buttons get on simultaneously, it works well.  
After that I tap 3 times but not the same effect, I switch between different effects and it has a weird behaviour.

![ezgif-4-7cffec107867.gif](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/2/d/2d3b145b6757fefd3019fcc1355f03431084b3ab.gif)

Has anyone had a similar problem?

Thank you!!

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [October 20, 2019, 8:00pm UTC](https://forum.djtechtools.com/t/little-problem-mapping-fx-on-traktor/78068/2 "2019-10-20T20:00:09Z")

</div>

Add FX Store Preset command to your button mappings 🙂

Add In → FX Units → FX Store Preset

---

<div class="post-metadata">

**Author:** ![tintirintin](https://avatars.discourse-cdn.com/v4/letter/t/71e660/32.png) [@tintirintin](https://forum.djtechtools.com/u/tintirintin)\
**Post date:** [October 21, 2019, 3:12pm UTC](https://forum.djtechtools.com/t/little-problem-mapping-fx-on-traktor/78068/3 "2019-10-21T15:12:51Z")

</div>

WOW! It worked!!  
Thank you for the answer!!  
I just don’t understand why it happens and why “FX Store Preset” makes it work 🙂

---

<div class="post-metadata">

**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\
**Post date:** [October 23, 2019, 9:12pm UTC](https://forum.djtechtools.com/t/little-problem-mapping-fx-on-traktor/78068/4 "2019-10-23T21:12:11Z")

</div>

> [@tintirintin](#):
>
> WOW! It worked!!  
> Thank you for the answer!!  
> I just don’t understand why it happens and why “FX Store Preset” makes it work 🙂

Glad to hear it!

The Store Preset will store effects in it’s ON STATE allowing you to insert already activated effects.

This is basically a snap shots for effects. Check out this vid to learn more about this feature.

[![](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/8/8/8804c7e4619acc69529f2a532776bdae4e17a408.jpeg "FX Snapshot: The Traktor Feature You've Never Heard Of") ](https://www.youtube.com/watch?v=tunfI1xvKNs)
