# Loop Mapping / APC40 / LED Help?

**URL:** <https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834>\
**Category:** Controller Mappings\
**Created:** [April 14, 2011, 3:31am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834 "2011-04-14T03:31:24Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 14, 2011, 3:31am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/1 "2011-04-14T03:31:24Z")

</div>

**Loop Mapping / APC40 / LED Help?**

Hi Everyone,

So I started playing around with mapping my apc40 for traktor but i continue to run into a wall with a few items, for now i’ll ask about the one main issue…

How do I map auto-loop points to buttons and have the led behave as follow:  
off=green  
activated=blinking green in sync (or at least blinking green)

I have searched the forums, the web and anywhere else i could and i have not found a solution - except one, which was a bit overly complicated for what I want to accomplish. So, maybe someone out there has an idea?

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 14, 2011, 4:08am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/2 "2011-04-14T04:08:24Z")

</div>

i have to admit, this is a bit ridiculous. i have all kinds of stuff mapped and i can’t get the right feedback… so nuts. must take a break.

---

<div class="post-metadata">

**Author:** ![coolmatic](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@coolmatic](https://forum.djtechtools.com/u/coolmatic)\
**Post date:** [April 14, 2011, 5:46am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/3 "2011-04-14T05:46:19Z")

</div>

The LEDs on the APC40 can be set to different states by putting in a value of 1-127 in the MIDI range section. You want to Add In… and select the function you have it assigned to, then look at the corresponding Out to see what the note is, for example Ch06.Note.A3 would correspond to the button fifth column, fifth row. For solid green and flashing green, you would want to put 2 for the Min MIDI range, and 127 for the Max MIDI range.  
Hope this helps, rather than confusing you more.

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 14, 2011, 5:54am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/4 "2011-04-14T05:54:19Z")

</div>

> [@coolmatic](#):
>
> The LEDs on the APC40 can be set to different states by putting in a value of 1-127 in the MIDI range section. You want to Add In… and select the function you have it assigned to, then look at the corresponding Out to see what the note is, for example Ch06.Note.A3 would correspond to the button fifth column, fifth row. For solid green and flashing green, you would want to put 2 for the Min MIDI range, and 127 for the Max MIDI range.  
> Hope this helps, rather than confusing you more.

i thought apc worked off of 0-7 for the range of available states?

---

<div class="post-metadata">

**Author:** ![coolmatic](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@coolmatic](https://forum.djtechtools.com/u/coolmatic)\
**Post date:** [April 14, 2011, 7:05am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/5 "2011-04-14T07:05:23Z")

</div>

Nah brah.

---

<div class="post-metadata">

**Author:** ![coolmatic](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@coolmatic](https://forum.djtechtools.com/u/coolmatic)\
**Post date:** [April 14, 2011, 7:13am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/6 "2011-04-14T07:13:08Z")

</div>

Not for me at least. When in doubt, RTFM 😉  
[http://www.akaipro.com/extras/product/apc40/APC40\_Communications\_Protocol\_rev\_1.pdf](http://www.akaipro.com/extras/product/apc40/APC40_Communications_Protocol_rev_1.pdf)

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 14, 2011, 7:44am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/7 "2011-04-14T07:44:25Z")

</div>

according to the manual…  
0=off, 1=green, 2=green blink, 3=red, 4=red blink, 5=yellow, 6=yellow blink, 7-127=green

---

<div class="post-metadata">

**Author:** ![coolmatic](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@coolmatic](https://forum.djtechtools.com/u/coolmatic)\
**Post date:** [April 14, 2011, 8:44am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/8 "2011-04-14T08:44:08Z")

</div>

Exactly.

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 14, 2011, 3:36pm UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/9 "2011-04-14T15:36:34Z")

</div>

haha… that’s 0-7 as i previously mentioned 😛

anyone have any ideas? i tried all kinds of different OUTs within the loops drop down and i can only get one state to operate at a time - either it’s blinking when on or blinking when off. There is no solid green on off and blinking on active.

Surely there must be a solution, no?

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 15, 2011, 12:43am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/10 "2011-04-15T00:43:31Z")

</div>

bump. it’s now day 3 as i attempt to map these damn loop buttons. if there is a mapping god out there - please make it rain!

---

<div class="post-metadata">

**Author:** ![CaptainMidnight](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/captainmidnight/32/13169_2.png) [@CaptainMidnight](https://forum.djtechtools.com/u/CaptainMidnight)\
**Post date:** [April 15, 2011, 1:03am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/11 "2011-04-15T01:03:38Z")

</div>

which buttons are you trying map?

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 15, 2011, 1:55am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/12 "2011-04-15T01:55:56Z")

</div>

apc40 grid

specifically…

Deck A  
row 3, column 1 = loop decrease  
row 3, column 2 = loop increase  
row 3, column 3 = loop size 1  
row 3, column 4 = loop size 2

row 4, column 1 = loop size 4  
row 4, column 2 = loop size 8  
row 4, column 3 = loop size 16  
row 4, column 4 = loop size 32

i am trying to map it so that when the loop is not active the led is solid green. when the loop is active the led is blinking green.

the loop decrease/increase would be solid orange.

i will then repeat this for Deck B.

---

<div class="post-metadata">

**Author:** ![coolmatic](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@coolmatic](https://forum.djtechtools.com/u/coolmatic)\
**Post date:** [April 15, 2011, 5:48am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/13 "2011-04-15T05:48:22Z")

</div>

You got the APC40 in ‘dumb’ mode?

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 15, 2011, 6:04am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/14 "2011-04-15T06:04:35Z")

</div>

hmmm… possibly not… i am on a mac though - i thought that was a windows thing?

---

<div class="post-metadata">

**Author:** ![coolmatic](https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/32.png) [@coolmatic](https://forum.djtechtools.com/u/coolmatic)\
**Post date:** [April 15, 2011, 7:47am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/15 "2011-04-15T07:47:48Z")

</div>

I assume it should apply to both. Open Ableton, wait for red rectangle around clips, close Ableton, open Traktor, then try your LED mappings.

---

<div class="post-metadata">

**Author:** ![MuzicFreq](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/muzicfreq/32/13385_2.png) [@MuzicFreq](https://forum.djtechtools.com/u/MuzicFreq)\
**Post date:** [April 15, 2011, 9:37am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/16 "2011-04-15T09:37:38Z")

</div>

> [@shanefontane](#):
>
> bump. it’s now day 3 as i attempt to map these damn loop buttons. if there is a mapping god out there - please make it rain!

Talk to Paddy, his APC40 mapping is godlike!  
been using it today and I took a look at the mapping section and MY GAWD I see stuff I never seen before:eek: But it all works 100% and getting more and more used to how it’s mapped.

he could help ya on getting the loops mapped like ya want

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 17, 2011, 5:57am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/17 "2011-04-17T05:57:02Z")

</div>

> [@MuzicFreq](#):
>
> Talk to Paddy, his APC40 mapping is godlike!  
> been using it today and I took a look at the mapping section and MY GAWD I see stuff I never seen before:eek: But it all works 100% and getting more and more used to how it’s mapped.
> 
> he could help ya on getting the loops mapped like ya want

thanks. i guess i decided to change my direction and use loop in/out points with inc/dec size. but now i’m trying to figure out how to work the Slot State parameter.

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 17, 2011, 5:57am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/18 "2011-04-17T05:57:50Z")

</div>

> [@coolmatic](#):
>
> I assume it should apply to both. Open Ableton, wait for red rectangle around clips, close Ableton, open Traktor, then try your LED mappings.

yeah. dumb state doesn’t seem to apply to mac. the leds load up correctly without having to go to ableton.

---

<div class="post-metadata">

**Author:** ![Graham\_Campbell](https://avatars.discourse-cdn.com/v4/letter/g/ac8455/32.png) [@Graham\_Campbell](https://forum.djtechtools.com/u/Graham_Campbell)\
**Post date:** [April 21, 2011, 3:20am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/19 "2011-04-21T03:20:04Z")

</div>

I’m sharing your pain right now! I’m new to Traktor (just acquired Traktor Scratch Pro 2) and am finding the mappings painful with my APC40.

I had no problems assigning hot cues for Deck A & Deck B so that I get solid green if no cue is assigned and solid red when cue is assigned, but trying to do similar with other actions such as having “beat jump” on deck A set to orange default is near impossible. I actually put in the correct values and it’s been turning red! Very frustrating.

I think my biggest frustration is that I can’t see the logic in why in some cases I can assign (for example) -1 and -1 as the midi range but in other cases it will force me to be in positive values only (I have -1 / -1 for the controller range with the hot cue state actions).

I feel your pain on this one, I’ll let you know if I have any success this weekend, will likely be starting from scratch again to see if I can nail this down.

---

<div class="post-metadata">

**Author:** ![shanefontane](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/shanefontane/32/14085_2.png) [@shanefontane](https://forum.djtechtools.com/u/shanefontane)\
**Post date:** [April 21, 2011, 5:03am UTC](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834/20 "2011-04-21T05:03:48Z")

</div>

> [@Graham\_Campbell](#):
>
> I’m sharing your pain right now! I’m new to Traktor (just acquired Traktor Scratch Pro 2) and am finding the mappings painful with my APC40.
> 
> I had no problems assigning hot cues for Deck A & Deck B so that I get solid green if no cue is assigned and solid red when cue is assigned, but trying to do similar with other actions such as having “beat jump” on deck A set to orange default is near impossible. I actually put in the correct values and it’s been turning red! Very frustrating.
> 
> I think my biggest frustration is that I can’t see the logic in why in some cases I can assign (for example) -1 and -1 as the midi range but in other cases it will force me to be in positive values only (I have -1 / -1 for the controller range with the hot cue state actions).
> 
> I feel your pain on this one, I’ll let you know if I have any success this weekend, will likely be starting from scratch again to see if I can nail this down.

this is the direction i went…

> **[Sharing Map 1.0](https://forum.djtechtools.com/showthread.php?p=271443&posted=1)**
>
> so, i searched around a bunch and asked a few questions and i thought i would share my map in its current state. for my v1 it seems pretty workable. leds and led rings seem to work well. there's some space left for future enhancements. 
>  
> \-...

[Next page](https://forum.djtechtools.com/t/loop-mapping-apc40-led-help/22834.md?page=2)
