# MAPPING 2 \* Xone K2 for 4 decks control **URL:** \ **Category:** Controller Mappings\ **Created:** [January 15, 2019, 7:11pm UTC](https://forum.djtechtools.com/t/mapping-2-xone-k2-for-4-decks-control/77700 "2019-01-15T19:11:35Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Errobix](https://avatars.discourse-cdn.com/v4/letter/e/ed655f/32.png) [@Errobix](https://forum.djtechtools.com/u/Errobix)\ **Post date:** [January 15, 2019, 7:11pm UTC](https://forum.djtechtools.com/t/mapping-2-xone-k2-for-4-decks-control/77700/1 "2019-01-15T19:11:35Z")
**MAPPING 2 \* Xone K2 for 4 decks control** (I just changed from my Xone 1D and 2D where i did’t have this problem because it were two different devices) It should be not that difficult but i’ve got the following question: I have two Xone K2 controllers with which I want to map the midi. 1 of the controllers must control deck A and C and the other deck B and D. How can I make sure that one K2 (say k2-1) controls A and C and the other K2 (say k2-2) B and control D. If I now program a midi signal on the K2-1, the same thing happens with the K2-2. Is there a possibility to give my k2-1 and k2-2 an ID so that I can split it? Or is there an other way to fix this? Thanks a lot. ---
**Author:** ![astromech](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/astromech/32/37_2.png) [@astromech](https://forum.djtechtools.com/u/astromech)\ **Post date:** [January 15, 2019, 10:36pm UTC](https://forum.djtechtools.com/t/mapping-2-xone-k2-for-4-decks-control/77700/2 "2019-01-15T22:36:49Z")
> [@Errobix](#): > > (I just changed from my Xone 1D and 2D where i did’t have this problem because it were two different devices) > > It should be not that difficult but i’ve got the following question: > > I have two Xone K2 controllers with which I want to map the midi. 1 of the controllers must control deck A and C and the other deck B and D. How can I make sure that one K2 (say k2-1) controls A and C and the other K2 (say k2-2) B and control D. If I now program a midi signal on the K2-1, the same thing happens with the K2-2. > > Is there a possibility to give my k2-1 and k2-2 an ID so that I can split it? Or is there an other way to fix this? > > Thanks a lot. Change the MIDI channel for one of them and map to that. ---
**Author:** ![Errobix](https://avatars.discourse-cdn.com/v4/letter/e/ed655f/32.png) [@Errobix](https://forum.djtechtools.com/u/Errobix)\ **Post date:** [January 16, 2019, 4:11pm UTC](https://forum.djtechtools.com/t/mapping-2-xone-k2-for-4-decks-control/77700/3 "2019-01-16T16:11:57Z")
**It worked!** I changed the midi channel of one of them and that solved the problem Thanks a lot!🙂🙂 ---
**Author:** ![astromech](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/astromech/32/37_2.png) [@astromech](https://forum.djtechtools.com/u/astromech)\ **Post date:** [January 16, 2019, 8:32pm UTC](https://forum.djtechtools.com/t/mapping-2-xone-k2-for-4-decks-control/77700/4 "2019-01-16T20:32:55Z")
No worries.