Mapping MPD32 shift button

DJ Software & Apps Controller Mappings
1

Mapping MPD32 shift button

Just purchased an Akai MPD32 and have been mapping for two deck control in conjunction with an external mixer. I’ve mapped all the pads to control deck functions and now want to also set up a shift option to make the pads trigger hot cues but have run into a problem.

I have to press my shift button twice to toggle it on/off, which completely defeats the point of the LED feedback, since when it’s on the LED is off half the time and vice versa.

I’ve followed these instructions to make my shift button.

Any ideas why this is happening?

2

Post a screenshot of the mapping window regarding the shift button, so we can “have a look”

3

On

Off

4

Add a screenshot of the out for shift button also, it could be an output problem, anyway, I can’t see clearly the screenshot, I assume you use “direct” to toggle 0-1 with a modifier1-0

5

Maybe you looked at my reply before I added both screenshots but I’ve put both up now. In the video I watched the buttons were set to hold…

EDIT: Have tried setting the buttons to direct and still no luck :unamused:

6

I can’t see what is written in the screenshot, and there is not the output command.
Anyway, you have to set like this, if modifier is 0, button direct to 1
If modifier is 1, button direct to 0.
Output should be in range 0-1

7

And try in the mapping window, disable the learn function, try to press shift, and have a look in the small windows on top if m1 change value.

8

Ahhh sorry, I didn’t set an output because the LED comes on when I press it by default. Do you think this is because I have the hardware set on the Live preset instead of a generic one?

ALSO, I might not have explained clearly but, after one press the LED is on and the modifier works, after another LED is off but modifier is still on, afte one more the LED is back on but modifier off, and finally another press turns everything off.

9

This is good question, you can try, set to generic, and try to map only the shift, and check on the modifier window if it works

10

I’ve sorted this problem, so I only have to press the button once and the modifier will change everytime, using the Vyzex software that come with the controller (changing the control to momentary instead of toggle). BUT the LED only comes on for a split second before going off, any help?

11

And here’s the ouptup for LED now.

12

Try setting the controller range 0 - 1
And if this not work, try disable “blend”

13

Sorry for leaving this thread for so long, been majorly busy with university so haven’t been using the MPD with Traktor until now and alas the problem still persists. i noticed on my last screenshot the led output was set to cc32 instead of 28, but having corrected it I still have the problem of the led not staying lit even with blend unchecked as Cionni suggested :disappointed:

ANYONE GOT A CLUE WHAT TO DO?

14

Have you tried to set your controller’s configuration to /toggle/ and set one modifier (no duplicates) to /hold/ interaction mode?

LED output 0 to 1 (no blend)

15

I have the controller set to toggle and understand thats why it doesn’t stay lit.

Is it the LED output MIDI range 0-1?

16

Also, if I have only one modifier the modifier stay on constantly after I have pressed it once.

17

Adding modifier to button that LED switch on by default is something different from what you seen in this video. No need to make modifiers to toggle because button is toggling LED by default. You need only one modifier set to /hold/ (no duplicate)

M1=1 /hold/

LED 0 to 1 (first try without blend)

18

Sorry if I’m being completely stupid, here are two screen shots of the modifer in and LED out

tumblr_m57jo0z5ZP1qz97eko1_1280.jpg
tumblr_m57jo0z5ZP1qz97eko1_1280.jpg277×280 14.5 KB

tumblr_m57jo0z5ZP1qz97eko2_1280.jpg
tumblr_m57jo0z5ZP1qz97eko2_1280.jpg280×280 14.8 KB

How come I don’t need another modifier from 1>0?

Thanks for the help Stewe!

19

You need to remove “M1=0” from modifier conditions.

Think logical. Why do you need to make modifier to toggle the button when that button has toggle by default. Sense to me :slight_smile:

20

Brilliant mate! Thanks alot, I didn’t realise that the other software worked in conjunction with Traktor aswell…

Cheers!