MIDI Twister & Controllermate knobs using different bank setting - Issue

DJ Software & Apps Controller Mappings
1

MIDI Twister & Controllermate knobs using different bank setting - Issue

Hi there,
I bought a MIDI Fighter Twister to work on Davinci using the App control for mac called Controllermate
I got my Twister set up in Midifighter Utility with every knob is ENC 3FH/41H and Switch Action type : Shift Encoder Hold

The encoder MIDI channel is 0
The Switch MIDI Channel is 2
The (hold & Twist) is channel 5 (according to controllermate).

And now when I hold down the knob and turn knobs in bank 1 its became unreliable and acting weird by loading the setting of the same knob on bank 3

How to easily fix this problem or what caused of this

Is there a way I can change the (hold & twist) channel in Midifighter Twister
Thanks everyone for your time !
Bests,

2

Can you double check all encoders and switches in the bank 1 and ensure that any of those were set in CH4.CC000, CH4.CC001, CH4.CC002 and CH4.CC003 (those are your bank change CC’s)

3

Hi Stewe
Thanks for your responding!
Can you show me how to check these info!
Many thanks
B.

4

You can check that with any software that in the Midifighter Utility if you click on the encoders in the program. Or you could actually try out any other software that accepts MIDI.

5

Hi Stewe,
If I understand it correctly.
I got my Bank 1 set up
Encoder: Channel 6 and start from 0 ->15

on my Bank 3 set up
Encoder run on channel 3 start from 32-> 47

I set up that way because it was having the same issue of loading the same knob but different bank setup.
I got that fixed by changing the channel number

Now when it comes to the press & hold & switch setup. They all in channel 5 and cant be change using Fighter Utility App
Thats where i get stuck!

THanks!

6

That’s correct the shift encoder CC will always send CH.5 and there is no option to alter that via the Utility.

Now I’m not very familiar with the Controllermate software but maybe you can use that program to translate the midi to some other channel?

7

Hi Stewe,
Enventhough I can change the channel in Controllermate but the source of information given from the fighter on CH.05 already messed up.
So the set up of mapping will also messed up

8

Screen Shot 2017-07-11 at 2.57.29 PM.jpg
Screen Shot 2017-07-11 at 2.57.29 PM.jpg414×280 22.3 KB

I got my attache here to show you that the 1st knob on bank 1 is actually giving message supposed to be on bank 4

9

Is that a bug from your firmware? Will DJ Tech Tools release a new update to fix these bugs soon?
Or someone here come up with the fix please guide me
Cheers!

10

Like I stated, I’m not familiar with that software to give you any additional input on rather this could be a bug or not. Feel free to contact DjTT support.