# Mixer Help

**URL:** <https://forum.djtechtools.com/t/mixer-help/67127>\
**Category:** Hardware: Controllers, Mods and Gear\
**Created:** [July 15, 2014, 8:17pm UTC](https://forum.djtechtools.com/t/mixer-help/67127 "2014-07-15T20:17:56Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![randal\_smarth](https://avatars.discourse-cdn.com/v4/letter/r/54ee81/32.png) [@randal\_smarth](https://forum.djtechtools.com/u/randal_smarth)\
**Post date:** [July 15, 2014, 8:17pm UTC](https://forum.djtechtools.com/t/mixer-help/67127/1 "2014-07-15T20:17:56Z")

</div>

**Mixer Help**

i am currently looking for a mixer to go with both of my Audio-Technica AT-LP120’s. Right now i am in music production school and we use the DJM-350 which is a great mixer but the only problem is that it doesn’t have any XLR ports what so ever so i cant hook it up to any speakers unless if i buy a DI box but even if i do i have heard that a DI box still doesn’t give you a great sound compared to if it was hooked up directly. so basically my question is can anybody give me some names of different 2 channel mixers to use that have XLR ports that are at least on par with the DJM-350 or better than the 350?

---

<div class="post-metadata">

**Author:** ![Big\_Panda](https://avatars.discourse-cdn.com/v4/letter/b/a587f6/32.png) [@Big\_Panda](https://forum.djtechtools.com/u/Big_Panda)\
**Post date:** [July 16, 2014, 7:53am UTC](https://forum.djtechtools.com/t/mixer-help/67127/2 "2014-07-16T07:53:17Z")

</div>

Xone 23 or DJM 250. Had both. Like both.

Quality 2 channel mixers with effects built in are pretty hard to find. Denon do some decent units.

---

<div class="post-metadata">

**Author:** ![SlayForMoney](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/slayformoney/32/14501_2.png) [@SlayForMoney](https://forum.djtechtools.com/u/SlayForMoney)\
**Post date:** [July 16, 2014, 9:02pm UTC](https://forum.djtechtools.com/t/mixer-help/67127/3 "2014-07-16T21:02:17Z")

</div>

Yeah, Denon X600 is in a different league - but worth it 😉

---

<div class="post-metadata">

**Author:** ![SlvrDragon50](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@SlvrDragon50](https://forum.djtechtools.com/u/SlvrDragon50)\
**Post date:** [July 16, 2014, 9:34pm UTC](https://forum.djtechtools.com/t/mixer-help/67127/4 "2014-07-16T21:34:49Z")

</div>

What’s your price limit?

Ecler Nuo 2 is not a bad choice either.

Honestly though, you can pick up a lot of 4 channel mixers used for pretty cheap nowadays for the same cost as a 2 channel mixer new.

---

<div class="post-metadata">

**Author:** ![randal\_smarth](https://avatars.discourse-cdn.com/v4/letter/r/54ee81/32.png) [@randal\_smarth](https://forum.djtechtools.com/u/randal_smarth)\
**Post date:** [July 16, 2014, 11:07pm UTC](https://forum.djtechtools.com/t/mixer-help/67127/5 "2014-07-16T23:07:26Z")

</div>

> [@SlvrDragon50](#):
>
> What’s your price limit?
> 
> Ecler Nuo 2 is not a bad choice either.
> 
> Honestly though, you can pick up a lot of 4 channel mixers used for pretty cheap nowadays for the same cost as a 2 channel mixer new.

I if could i would like to stay around the $600 dollar mark

---

<div class="post-metadata">

**Author:** ![atontheproton](https://avatars.discourse-cdn.com/v4/letter/a/eb8c5e/32.png) [@atontheproton](https://forum.djtechtools.com/u/atontheproton)\
**Post date:** [July 17, 2014, 6:33pm UTC](https://forum.djtechtools.com/t/mixer-help/67127/6 "2014-07-17T18:33:12Z")

</div>

I use the mackie 4d pro , good 4 channel mixer and it is traktor certified, got it for 500$ used @ a local music store.

two or four channels is the big question , if you’re going for production school & you dj its always nice to have more channels available to you.

I run 2 decks and then my desktop through my mixer to my speakers from my m-audiophile soundcard leaving one extra channel which I just have a RCA to 3mm jack so anyone can just hook up a Ipod or phone to it.

---

<div class="post-metadata">

**Author:** ![randal\_smarth](https://avatars.discourse-cdn.com/v4/letter/r/54ee81/32.png) [@randal\_smarth](https://forum.djtechtools.com/u/randal_smarth)\
**Post date:** [July 18, 2014, 5:12pm UTC](https://forum.djtechtools.com/t/mixer-help/67127/7 "2014-07-18T17:12:31Z")

</div>

thank you for the feedback everyone. i actually just bought a DJM-400 after looking around reading reviews and getting some feedback from professors i am going to stick in the Pioneer branch
