# My happy place.

**URL:** <https://forum.djtechtools.com/t/my-happy-place/39111>\
**Category:** Show your Setup\
**Created:** [March 12, 2012, 11:13am UTC](https://forum.djtechtools.com/t/my-happy-place/39111 "2012-03-12T11:13:09Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [March 12, 2012, 11:13am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/1 "2012-03-12T11:13:09Z")

</div>

**My happy place.**

Was:

---

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [March 12, 2012, 11:13am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/2 "2012-03-12T11:13:40Z")

</div>

Currently:

---

<div class="post-metadata">

**Author:** ![Luconia](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/luconia/32/15268_2.png) [@Luconia](https://forum.djtechtools.com/u/Luconia)\
**Post date:** [March 12, 2012, 11:18am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/3 "2012-03-12T11:18:31Z")

</div>

nice & tidy!  
how do you find mixing with those Yamaha monitors? aren’t they too sharp sounding?  
i have a pair of HS80M for my synth, but never thought of using that monitors for djing…

---

<div class="post-metadata">

**Author:** ![Sublim\_All](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/sublim_all/32/3129_2.png) [@Sublim\_All](https://forum.djtechtools.com/u/Sublim_All)\
**Post date:** [March 12, 2012, 11:25am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/4 "2012-03-12T11:25:48Z")

</div>

> [@Luconia](#):
>
> nice & tidy!  
> how do you find mixing with those Yamaha monitors? aren’t they too sharp sounding?  
> i have a pair of HS80M for my synth, but never thought of using that monitors for djing…

I’d say they sound quite good for DJing, as their sound isn’t flat but a bit more powerful in the high and low. They’re a good choice, I’ve doubted between these and M-Audio CX8s a lot.

Nice setup BTW, just love the 3 TTs in a row😍

---

<div class="post-metadata">

**Author:** ![Luconia](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/luconia/32/15268_2.png) [@Luconia](https://forum.djtechtools.com/u/Luconia)\
**Post date:** [March 12, 2012, 1:52pm UTC](https://forum.djtechtools.com/t/my-happy-place/39111/5 "2012-03-12T13:52:54Z")

</div>

> [@Sublim\_All](#):
>
> I’d say they sound quite good for DJing, as their sound isn’t flat but a bit more **powerful in the high and low.** They’re a good choice, I’ve doubted between these and M-Audio CX8s a lot.

Agreed with that part since i just love the bass from these monitors, it makes my windows shattering whenever i play a whooshing sound effect from the synth 🙂

---

<div class="post-metadata">

**Author:** ![djelectroniK](https://avatars.discourse-cdn.com/v4/letter/d/e19adc/32.png) [@djelectroniK](https://forum.djtechtools.com/u/djelectroniK)\
**Post date:** [March 12, 2012, 3:01pm UTC](https://forum.djtechtools.com/t/my-happy-place/39111/6 "2012-03-12T15:01:05Z")

</div>

I’m glad those Yamaha monitors work for you. I also admire the 3 TTs. But most importantly, it’s very clean and simple! And I absolutely love your collection in the cupboard!

---

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [March 16, 2012, 5:44am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/7 "2012-03-16T05:44:08Z")

</div>

Definitely flatter than the KRKs that every man and their dog seems to be using. Beautiful monitors: in their sound, sight and construction.

Considered the HS10W but would probably be too big for that room.

Need to make another trip to IKEA: too much wax on the floor and nowhere to store my MIDI gear or second Empath (would like to clear the space on the left to put my lappy and soundcard).

---

<div class="post-metadata">

**Author:** ![TeddyWhite](https://avatars.discourse-cdn.com/v4/letter/t/b2d939/32.png) [@TeddyWhite](https://forum.djtechtools.com/u/TeddyWhite)\
**Post date:** [March 16, 2012, 5:48am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/8 "2012-03-16T05:48:24Z")

</div>

so clean…

---

<div class="post-metadata">

**Author:** ![papo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/papo/32/13373_2.png) [@papo](https://forum.djtechtools.com/u/papo)\
**Post date:** [March 16, 2012, 5:51am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/9 "2012-03-16T05:51:20Z")

</div>

What stands are those?

That’s a nice, clean setup!

---

<div class="post-metadata">

**Author:** ![DennisHuiberts](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/dennishuiberts/32/14614_2.png) [@DennisHuiberts](https://forum.djtechtools.com/u/DennisHuiberts)\
**Post date:** [March 19, 2012, 10:01am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/10 "2012-03-19T10:01:45Z")

</div>

Rotary Empath \<3

---

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [March 20, 2012, 8:50am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/11 "2012-03-20T08:50:12Z")

</div>

Uncertain if the stands are still in production - didn’t see them last time I looked at the site - but each monitor is sitting on an Ultimate Support MS45B (being 45"; there is/was a 36" model as well).

The Rotary Empath is an absolute joy and is hooked up a majority of the time, but I was left wanting when mixing drum’n’bass & hip-hop, so I picked up the Empath as well (far left).

---

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [November 10, 2013, 11:20am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/12 "2013-11-10T11:20:43Z")

</div>

**No, it’s not a black-and-white photo…**

Last time, honest:

---

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [November 10, 2013, 1:45pm UTC](https://forum.djtechtools.com/t/my-happy-place/39111/13 "2013-11-10T13:45:41Z")

</div>

Was asked elsewhere about coming from Stantons and thought a repost might prove worthwhile…

_Honestly?_  
_Two different decks. I couldn’t truthfully say that 1200s are better than the ST-150s from a functional standpoint._  
_It may be a placebo effect, but I feel my tunes sound brighter and better than through the Stantons. It could be that even going through phono it’s still hitting a DAC, as the decks have keylock (which I never actually used)._  
_I hit the jackpot with these two pairs, but anyone getting into turntables asking for advice? Better a new set of ST(R8)-150s than secondhand 1200s of an unknown origin._

---

<div class="post-metadata">

**Author:** ![afxz](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/afxz/32/16152_2.png) [@afxz](https://forum.djtechtools.com/u/afxz)\
**Post date:** [November 11, 2013, 6:45pm UTC](https://forum.djtechtools.com/t/my-happy-place/39111/14 "2013-11-11T18:45:23Z")

</div>

In your early set-up pictures you had the large centre-blocks in place over the top of the records… I’ve seen these around before - what are they?

---

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [November 12, 2013, 2:32am UTC](https://forum.djtechtools.com/t/my-happy-place/39111/15 "2013-11-12T02:32:28Z")

</div>

Record weights.

I get a lot of tunes mail order, and a good chunk of them are slightly bowled (not warped).

Putting the extra weight on means wax’ll get a bit of grip on the slipmat.

---

<div class="post-metadata">

**Author:** ![Johbremat](https://avatars.discourse-cdn.com/v4/letter/j/e480ec/32.png) [@Johbremat](https://forum.djtechtools.com/u/Johbremat)\
**Post date:** [November 14, 2013, 2:05pm UTC](https://forum.djtechtools.com/t/my-happy-place/39111/16 "2013-11-14T14:05:41Z")

</div>

One of the things that irked me about the Stantons was a lack of a suitable dust-repelling solution.

Well:

And for anyone with an Empath, turns out DeckSaver’s unit for the TTM-56/57SL is compatible:

Why I didn’t think to check and compare the dimensions of the top plate before, I don’t know.
