I am trying to get external sound by running from the Audio 2DJ A channel output with a 1/4" to 1/8" cable directly into a 2.1 computer speaker set up. It’s only playing through the left speaker and sound is shady at best. Normally these speakers put out really good sound.
I played with the audio settings but I’m not really sure how they are supposed to be arranged. I’m assuming I’d go through the output master and I have both the channels assigned to A and left and right.
I think you may need to set your routing to Internal and set the Master Out to whatever out you use for the Audio2.
Do you only have one cable running to the speakers? Does each speaker have it’s on 1/8" cable, or is there one for both of them? If there is one cable coming from the speakers than you need to get a splitter to plug the 1/4" into to connect it to the AUdio2.
One cable but the speakers run from a powered sub and there is only a single 1/8" input. I’m running the single line with a 1/4" plugged to the out of the Audio 2 going to a 1/8" plugged directly into the sub.
Use the cable that came with the soundcard and connect the rca’s to the female rca’s on this cable. then plug your jack into the female headphone input on the cable in the picture.
