# Play cue when pressed

**URL:** <https://forum.djtechtools.com/t/play-cue-when-pressed/18040>\
**Category:** Hardware: Controllers, Mods and Gear\
**Tags:** samples, cue-points, numark-mixtrack, traktor\
**Created:** [January 7, 2011, 11:23pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040 "2011-01-07T23:23:59Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![kami](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/kami/32/13436_2.png) [@kami](https://forum.djtechtools.com/u/kami)\
**Post date:** [January 7, 2011, 11:23pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/1 "2011-01-07T23:23:59Z")

</div>

**Play cue when pressed**

Alright, forgive my lack of proper terminology. I’m using Traktor Pro with the Numark Mixtrack. Is there any way with the controller or software (ideally both) that you can set a cue point in a particular part of a song that would serve as a sample? For example:

Say in a song there was a vocal sample that said oh, idk, something like “Drop the beat”. Is there a way you can set a cue point at the beginning of that sample, and then only have that deck play while you hold down a button?

---

<div class="post-metadata">

**Author:** ![photojojo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/photojojo/32/14618_2.png) [@photojojo](https://forum.djtechtools.com/u/photojojo)\
**Post date:** [January 7, 2011, 11:35pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/2 "2011-01-07T23:35:39Z")

</div>

If the tracks not playing then you can just hold a cue point and it will keep playing until you release it and then it snaps back to the cue point.

---

<div class="post-metadata">

**Author:** ![kami](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/kami/32/13436_2.png) [@kami](https://forum.djtechtools.com/u/kami)\
**Post date:** [January 7, 2011, 11:39pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/3 "2011-01-07T23:39:15Z")

</div>

Oh AWESOME! Ok, one more question - Is there a way with the Mixtrack you can ‘move’ or ‘scroll’ through your cue points?

---

<div class="post-metadata">

**Author:** ![kami](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/kami/32/13436_2.png) [@kami](https://forum.djtechtools.com/u/kami)\
**Post date:** [January 8, 2011, 6:02pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/4 "2011-01-08T18:02:05Z")

</div>

Anyone? =\

---

<div class="post-metadata">

**Author:** ![safefire](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/safefire/32/13574_2.png) [@safefire](https://forum.djtechtools.com/u/safefire)\
**Post date:** [January 8, 2011, 10:35pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/5 "2011-01-08T22:35:12Z")

</div>

Normally, the way that’s done is to simply have one button per cue point (This brings things a lot closer to the arcade button concept on Eans VCI-100).

If you wish, you could map each of the four buttons on the bottom of the control to a certain cue point.

---

<div class="post-metadata">

**Author:** ![kami](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/kami/32/13436_2.png) [@kami](https://forum.djtechtools.com/u/kami)\
**Post date:** [January 8, 2011, 10:52pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/6 "2011-01-08T22:52:34Z")

</div>

I’m using the Numark Mixtrack… Which four buttons are you referring to?

---

<div class="post-metadata">

**Author:** ![safefire](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/safefire/32/13574_2.png) [@safefire](https://forum.djtechtools.com/u/safefire)\
**Post date:** [January 8, 2011, 10:53pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/7 "2011-01-08T22:53:49Z")

</div>

Aren’t there four buttons beneath the jog wheel or roughly the same size?  
Play, cue, sync, etc

---

<div class="post-metadata">

**Author:** ![kami](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/kami/32/13436_2.png) [@kami](https://forum.djtechtools.com/u/kami)\
**Post date:** [January 8, 2011, 10:54pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/8 "2011-01-08T22:54:49Z")

</div>

…Yes, but if I were to map them to cue points what buttons would I use to play / sync etc?

---

<div class="post-metadata">

**Author:** ![padi\_04](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/padi_04/32/56291_2.png) [@padi\_04](https://forum.djtechtools.com/u/padi_04)\
**Post date:** [January 8, 2011, 11:11pm UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/9 "2011-01-08T23:11:00Z")

</div>

> [@kami](#):
>
> …Yes, but if I were to map them to cue points what buttons would I use to play / sync etc?

modifiers are your friends

---

<div class="post-metadata">

**Author:** ![Bkag](https://avatars.discourse-cdn.com/v4/letter/b/c37758/32.png) [@Bkag](https://forum.djtechtools.com/u/Bkag)\
**Post date:** [January 9, 2011, 8:55am UTC](https://forum.djtechtools.com/t/play-cue-when-pressed/18040/10 "2011-01-09T08:55:01Z")

</div>

If you did want to be able to scroll through set either a knob or two (inc & dec) buttons to a modifier and then use that modifier condition on your cue button
