# Problem when set the hot cue

**URL:** <https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021>\
**Category:** Traktor\
**Created:** [November 27, 2012, 4:18pm UTC](https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021 "2012-11-27T16:18:52Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Whitebrain](https://avatars.discourse-cdn.com/v4/letter/w/34f0e0/32.png) [@Whitebrain](https://forum.djtechtools.com/u/Whitebrain)\
**Post date:** [November 27, 2012, 4:18pm UTC](https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021/1 "2012-11-27T16:18:52Z")

</div>

**Problem when set the hot cue**

Hi guys,

Recently, I upgraded my Traktor pro to 2.6 version and install the mapping BeauBryte DJTT Kontrol S2.

Here’s a problem.  
When I set the hot cue point, hot cue is set at the slight different point.

Example  
I want to change the hot cue point little bit. So I turn the jog wheel a little form original cue point and press shift+hotcue to delete original point, then press the hotcue to set a new point. But, the new hot cue point is set to original point or slight before or after the point which I want to set as hot cue.

Before upgrade and install the new mapping setup, I had no problem with hot cue. I changed the mapping to original S2 mapping, but problem stays.

Have you guys any experience or advice for this hot cue problem?

Hope you have a good day.

---

<div class="post-metadata">

**Author:** ![jayo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jayo/32/14074_2.png) [@jayo](https://forum.djtechtools.com/u/jayo)\
**Post date:** [November 27, 2012, 4:20pm UTC](https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021/2 "2012-11-27T16:20:56Z")

</div>

Take “snap” off and it should set exactly where you want it to.

---

<div class="post-metadata">

**Author:** ![Whitebrain](https://avatars.discourse-cdn.com/v4/letter/w/34f0e0/32.png) [@Whitebrain](https://forum.djtechtools.com/u/Whitebrain)\
**Post date:** [November 27, 2012, 4:27pm UTC](https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021/3 "2012-11-27T16:27:13Z")

</div>

Where I can find ‘snap’?

If you mean mouse mode, it already set to vinyl not snap.

---

<div class="post-metadata">

**Author:** ![VanGogo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/vangogo/32/12189_2.png) [@VanGogo](https://forum.djtechtools.com/u/VanGogo)\
**Post date:** [November 27, 2012, 4:34pm UTC](https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021/4 "2012-11-27T16:34:28Z")

</div>

Snap is the S button in the middle at the top of the software under the main out gain knob. When snap is on, the cue point will snap to the nearest beat marker.

---

<div class="post-metadata">

**Author:** ![Whitebrain](https://avatars.discourse-cdn.com/v4/letter/w/34f0e0/32.png) [@Whitebrain](https://forum.djtechtools.com/u/Whitebrain)\
**Post date:** [November 27, 2012, 5:00pm UTC](https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021/5 "2012-11-27T17:00:01Z")

</div>

Really thanks VanGogo.

It was somehow turned on.

---

<div class="post-metadata">

**Author:** ![VanGogo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/vangogo/32/12189_2.png) [@VanGogo](https://forum.djtechtools.com/u/VanGogo)\
**Post date:** [November 28, 2012, 1:46am UTC](https://forum.djtechtools.com/t/problem-when-set-the-hot-cue/50021/6 "2012-11-28T01:46:37Z")

</div>

You are welcome! You can always check your manual too 🙂