# remix deck control with mf3d help

**URL:** <https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974>\
**Category:** Midi Fighters\
**Created:** [February 5, 2013, 4:25am UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974 "2013-02-05T04:25:01Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![djBlamo](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@djBlamo](https://forum.djtechtools.com/u/djBlamo)\
**Post date:** [February 5, 2013, 4:25am UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/1 "2013-02-05T04:25:01Z")

</div>

**remix deck control with mf3d help**

im using the jam on it mapping and have the firmware set to remix decks.

the fx side of things works great but i still cant seem to launch my remix decks with the mf3d.

what mapping is ean using in that youtube video where he is control ing the remix decks

---

<div class="post-metadata">

**Author:** ![Jester](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jester/32/12996_2.png) [@Jester](https://forum.djtechtools.com/u/Jester)\
**Post date:** [February 5, 2013, 5:19am UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/2 "2013-02-05T05:19:55Z")

</div>

Press the right side middle button to toggle into HID (Remix Deck) mode  
so when you load up traktor, one quadrant of the 3D should start flashing showing you the available decks to control, press that to activate the deck.  
so in that mode you are controlling the FX and remix decks at the same time, so if your remix deck is deck c for example, if you want the fx on that deck you would press the 3rd bank button, etc.  
hope this helped a bit mate

---

<div class="post-metadata">

**Author:** ![Jester](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jester/32/12996_2.png) [@Jester](https://forum.djtechtools.com/u/Jester)\
**Post date:** [February 5, 2013, 5:25am UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/3 "2013-02-05T05:25:47Z")

</div>

Now with eans settings, the only HID function you have is the toggle button, which is the right side middle.  
If you load up my .mfs file here, that remains the same but the top two on the left side move the pages up/down, the bottom on that side activates the reverse mode, the top on the right is the shift, the bottom right toggles quantize, the bank buttons toggle bank mute (with shift it stops the bank)

[https://dl.dropbox.com/u/55238820/Remix](https://dl.dropbox.com/u/55238820/Remix) Deck Settings.mfs

its easy enough to change yourself if you want.

---

<div class="post-metadata">

**Author:** ![djBlamo](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@djBlamo](https://forum.djtechtools.com/u/djBlamo)\
**Post date:** [February 5, 2013, 8:18am UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/4 "2013-02-05T08:18:19Z")

</div>

> [@Jester](#):
>
> Press the right side middle button to toggle into HID (Remix Deck) mode  
> so when you load up traktor, one quadrant of the 3D should start flashing showing you the available decks to control, press that to activate the deck.  
> so in that mode you are controlling the FX and remix decks at the same time, so if your remix deck is deck c for example, if you want the fx on that deck you would press the 3rd bank button, etc.  
> hope this helped a bit mate

ya i switched to the hid mode and loaded traktor but nothing flashes and i still can control the remix deck except for effects

---

<div class="post-metadata">

**Author:** ![Jester](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jester/32/12996_2.png) [@Jester](https://forum.djtechtools.com/u/Jester)\
**Post date:** [February 5, 2013, 9:45am UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/5 "2013-02-05T09:45:02Z")

</div>

does your settings looks something like this?

!([https://dl.dropbox.com/u/55238820/Snap](https://dl.dropbox.com/u/55238820/Snap) 2013-02-05 at 22.41.17.jpg)

---

<div class="post-metadata">

**Author:** ![photojojo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/photojojo/32/14618_2.png) [@photojojo](https://forum.djtechtools.com/u/photojojo)\
**Post date:** [February 5, 2013, 1:21pm UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/6 "2013-02-05T13:21:50Z")

</div>

Are you using a USB hub?

---

<div class="post-metadata">

**Author:** ![Jester](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jester/32/12996_2.png) [@Jester](https://forum.djtechtools.com/u/Jester)\
**Post date:** [February 5, 2013, 1:38pm UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/7 "2013-02-05T13:38:28Z")

</div>

> [@photojojo](#):
>
> Are you using a USB hub?

thanks man, good point. dont use one with the 3d unless its powered.

---

<div class="post-metadata">

**Author:** ![djBlamo](https://avatars.discourse-cdn.com/v4/letter/d/c57346/32.png) [@djBlamo](https://forum.djtechtools.com/u/djBlamo)\
**Post date:** [February 5, 2013, 3:01pm UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/8 "2013-02-05T15:01:04Z")

</div>

> [@Jester](#):
>
> thanks man, good point. dont use one with the 3d unless its powered.

no i aint using a hub and yes my utility look like that…

---

<div class="post-metadata">

**Author:** ![Jester](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jester/32/12996_2.png) [@Jester](https://forum.djtechtools.com/u/Jester)\
**Post date:** [February 6, 2013, 11:42am UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/9 "2013-02-06T11:42:16Z")

</div>

and you have a deck already set as a remix deck when you load traktor? do you see the ghost F1 in the controller manager?

---

<div class="post-metadata">

**Author:** ![Xtian317](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/xtian317/32/15047_2.png) [@Xtian317](https://forum.djtechtools.com/u/Xtian317)\
**Post date:** [February 7, 2013, 2:49pm UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/10 "2013-02-07T14:49:16Z")

</div>

> [@Jester](#):
>
> Now with eans settings, the only HID function you have is the toggle button, which is the right side middle.  
> If you load up my .mfs file here, that remains the same but the top two on the left side move the pages up/down, the bottom on that side activates the reverse mode, the top on the right is the shift, the bottom right toggles quantize, the bank buttons toggle bank mute (with shift it stops the bank)
> 
> [https://dl.dropbox.com/u/55238820/Remix](https://dl.dropbox.com/u/55238820/Remix) Deck Settings.mfs
> 
> its easy enough to change yourself if you want.

I’m interested in your MF3D settings, but the dropbox link doesn’t work. I copied and pasted it with and without the SSL header.

---

<div class="post-metadata">

**Author:** ![Kyoh](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/kyoh/32/12506_2.png) [@Kyoh](https://forum.djtechtools.com/u/Kyoh)\
**Post date:** [April 18, 2013, 3:14pm UTC](https://forum.djtechtools.com/t/remix-deck-control-with-mf3d-help/52974/11 "2013-04-18T15:14:28Z")

</div>

**Also having issues… Remix deck**

I am also having issues controlling the remix Deck.

checking the right middle button when I get home, but what’s up with all the video’s stating that you have to import the file twice?

What is the reasoning, and what am I supposed to look for to determine if I imported correctly?
