# Simple F! Mapping question (LED's)

**URL:** <https://forum.djtechtools.com/t/simple-f-mapping-question-leds/68556>\
**Category:** Controller Mappings\
**Tags:** led-feedback, f1-mapping, led-feedback-f1\
**Created:** [October 23, 2014, 11:34pm UTC](https://forum.djtechtools.com/t/simple-f-mapping-question-leds/68556 "2014-10-23T23:34:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![bluecollarprophet](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bluecollarprophet/32/14184_2.png) [@bluecollarprophet](https://forum.djtechtools.com/u/bluecollarprophet)\
**Post date:** [October 23, 2014, 11:34pm UTC](https://forum.djtechtools.com/t/simple-f-mapping-question-leds/68556/1 "2014-10-23T23:34:41Z")

</div>

**Simple F! Mapping question (LED’s)**

I’ve created a nice simple mapping using the F1 to control each deck (A, B, C, D)  
Each deck is setup the same on the F1  
Fader = Track volume, 1st button p= lay pause, 2nd 3rd and 4th buttons are cue points

my question is how to have the cue point light up a dim color when setting a cue point and then going back to a default color when that cue point is deleted.

i basically just need LED feed back on if i have a cue point (or 2 or 3) set of that track when the track loads

thanks  
JIM