# Stewe's Custom Mapping Services \[TRAKTOR\] **URL:** \ **Category:** Buy & Sell\ **Created:** [May 7, 2015, 10:21am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135 "2015-05-07T10:21:24Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [June 7, 2015, 4:39pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/24 "2015-06-07T16:39:23Z")
> [@ToOntown](#): > > What part of the world do you live in, Stewe? Can’t remember for the life of me. Located in Serbia (Europe) ---
**Author:** ![neilmcm](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/neilmcm/32/11072_2.png) [@neilmcm](https://forum.djtechtools.com/u/neilmcm)\ **Post date:** [June 21, 2015, 9:07am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/25 "2015-06-21T09:07:24Z")
Stewe what price for mapping a twister and combing the sequencer mapping with your Twister 4FX Pro mapping is this even possible. ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [June 21, 2015, 9:16am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/26 "2015-06-21T09:16:49Z")
> [@neilmcm](#): > > Stewe what price for mapping a twister and combing the sequencer mapping with your Twister 4FX Pro mapping is this even possible. Twister is designed to allow users to combine any midi mapping with Traktor Sequencer. You can load my 4FX Pro and switch between midi mode and sequencer firmware by pressing both middle center side buttons simultaneously. No need for extra work 🙂 ---
**Author:** ![neilmcm](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/neilmcm/32/11072_2.png) [@neilmcm](https://forum.djtechtools.com/u/neilmcm)\ **Post date:** [June 21, 2015, 9:32am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/27 "2015-06-21T09:32:07Z")
cool will try this out tonight , do I load the 4fx mapping using the MF Utility ? ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [June 21, 2015, 6:31pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/28 "2015-06-21T18:31:09Z")
> [@neilmcm](#): > > cool will try this out tonight , do I load the 4fx mapping using the MF Utility ? Download and unzip, inside you should see a TSI and MFS (midi fighter settings) BACKUP YOUR MAPPINGS FIRST! step 2 will overwrite any mappings that are already in your Traktor Device Menu. 1. Open MF Utility and import provided .mfs file. Then click “Send to Midifighter” and new settings will apply. 2. Use big IMPORT button at the bottom left of the Preferences window to import 4FX Pro mapping. (Import twice to apply new FX settings) 3. Finally add the Twister Sequencer mapping from the Device Menu Import. ![Screen Shot 2015-06-21 at 4.22.37 AM.jpg](https://us1.discourse-cdn.com/flex001/uploads/techtools/original/3X/0/0/004a20a9c099b357e5ad3c0eb558dd7590461c7d.jpeg) Don’t forget to assign MIDI ports for each part of the mapping. ---
**Author:** ![pixelbreak](https://avatars.discourse-cdn.com/v4/letter/p/c67d28/32.png) [@pixelbreak](https://forum.djtechtools.com/u/pixelbreak)\ **Post date:** [July 20, 2015, 6:43am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/29 "2015-07-20T06:43:12Z")
share some love for K2s…another guys made a comment about it and I’m interested on one ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [July 24, 2015, 2:26am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/30 "2015-07-24T02:26:07Z")
> [@pixelbreak](#): > > share some love for K2s…another guys made a comment about it and I’m interested on one I’m sorry, I don’t have K2 and the way things are it’s hard to say that I will buy one soon. ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [August 1, 2015, 8:03pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/31 "2015-08-01T20:03:18Z")
Added Livid Instruments DS1 as a new mapping option. ---
**Author:** ![MrAybar](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mraybar/32/14106_2.png) [@MrAybar](https://forum.djtechtools.com/u/MrAybar)\ **Post date:** [January 28, 2016, 12:49am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/32 "2016-01-28T00:49:12Z")
Interested on the K2 here!!! > [@Stewe](#): > > Not at this time I’m afraid. BUT f there is more people with requests for The K2 mappings you guys could consider to chip in for this controller and I’ll follow up with your mappings afterwards. ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [February 10, 2016, 9:59pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/33 "2016-02-10T21:59:52Z")
> [@MrAybar](#): > > Interested on the K2 here!!! Not jet supported! ---
**Author:** ![pixelbreak](https://avatars.discourse-cdn.com/v4/letter/p/c67d28/32.png) [@pixelbreak](https://forum.djtechtools.com/u/pixelbreak)\ **Post date:** [February 10, 2016, 10:23pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/34 "2016-02-10T22:23:23Z")
hope in the near future the K2 mapping services will be available. I would ship mine but is heaps expensive from Costa Rica. ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [February 11, 2016, 4:03pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/35 "2016-02-11T16:03:04Z")
Alrighty guys - the Xone K2 is now added as an option! ---
**Author:** ![jimmyv](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jimmyv/32/12615_2.png) [@jimmyv](https://forum.djtechtools.com/u/jimmyv)\ **Post date:** [February 20, 2016, 7:28pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/36 "2016-02-20T19:28:45Z")
I’m looking at getting the Livid Instruments Base II. I’d like to get it mapped as of it were 2 F1’s. So I can control both left and right remix decks. I’d like to use it with my new set up of XDJ 1000’s and Z2. Is this possible? What do you think the cost would be approximately? ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [February 20, 2016, 10:30pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/37 "2016-02-20T22:30:44Z")
> [@jimmyv](#): > > I’m looking at getting the Livid Instruments Base II. I’d like to get it mapped as of it were 2 F1’s. So I can control both left and right remix decks. I’d like to use it with my new set up of XDJ 1000’s and Z2. Is this possible? What do you think the cost would be approximately? Hi jimmyv, What you’re saying is totally possible. I’d also map upper touch buttons to offer you three different modes of touch faders for each deck C and D if you like the idea. Button 1 = Slot Volume Adjust Button 2 = Slot Filter Adjust Button 3 = Slot FX Amount Button 4 = Reset the value of faders in active mode Full LED feedback for each cell state (empty, loaded, playing) there is also “waiting” but since Traktor has a known bug with it I never recommend using that state. My charge for this would be US $50 and the mapping should not take more than 8 days to build. Thanks for your interest. Edit: I’ve already had made and uploaded such mapping on Traktorbible site: [https://traktorbible.com/freaks/mappingview.aspx?id=710](https://traktorbible.com/freaks/mappingview.aspx?id=710) Check it out when you have BASE controller! ---
**Author:** ![jimmyv](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jimmyv/32/12615_2.png) [@jimmyv](https://forum.djtechtools.com/u/jimmyv)\ **Post date:** [February 29, 2016, 7:43am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/38 "2016-02-29T07:43:34Z")
I just ordered the Base 2. I may need some help with it. I’ll let you know when I get it. ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [March 1, 2016, 12:19pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/39 "2016-03-01T12:19:56Z")
> [@jimmyv](#): > > I just ordered the Base 2. I may need some help with it. I’ll let you know when I get it. Nice! Looking forwards to your email. ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [July 18, 2016, 10:42am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/40 "2016-07-18T10:42:58Z")
Bump for the love of new mappings 🙂 ---
**Author:** ![dj\_wo\_k](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/dj_wo_k/32/16276_2.png) [@dj\_wo\_k](https://forum.djtechtools.com/u/dj_wo_k)\ **Post date:** [July 21, 2016, 6:04am UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/41 "2016-07-21T06:04:14Z")
Hi Stewe, are you using Xtrem mapping (i use a lot ^^) for thoese who say it’s expensive .. i take same price for xone user’s, it’s long and hard to doing a personal great mapping ,hug 😉 ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [August 6, 2016, 12:43pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/42 "2016-08-06T12:43:03Z")
> [@dj\_wo\_k](#): > > Hi Stewe, are you using Xtrem mapping (i use a lot ^^) for thoese who say it’s expensive .. i take same price for xone user’s, it’s long and hard to doing a personal great mapping ,hug 😉 Nope never used xtreme mappings app - I use the CMDR tsi editor for Windows only from recently. ---
**Author:** ![Stewe](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/stewe/32/14607_2.png) [@Stewe](https://forum.djtechtools.com/u/Stewe)\ **Post date:** [August 6, 2016, 12:43pm UTC](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135/43 "2016-08-06T12:43:45Z")
Added NI Kontrol X1 MK2 to the mapping options 🙂 [Previous page](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135.md?page=1) [Next page](https://forum.djtechtools.com/t/stewes-custom-mapping-services-traktor/71135.md?page=3)