# Switching between using Traktor for Timecode and non-timecode

**URL:** <https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615>\
**Category:** General Discussion\
**Created:** [October 26, 2013, 2:41pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615 "2013-10-26T14:41:40Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 2:41pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/1 "2013-10-26T14:41:40Z")

</div>

**Switching between using Traktor for Timecode and non-timecode**

I used to use Traktor Scratch Pro II with timecode CDs and Pioneer CDJs, 2 decks timecode and the other two decks no timecde, now I have Maschine and 4 tracks decks, everythings synced up with MIDI clock for Maschine etc.

So, is it possible for me to set up timecode again, and be able to just switch back form my normal set up, to traktor with timecode, for when i just fancy using some decks? I have two Vestax TT’s and would like to give my timecode vinyl a little spin, how do I go about doing this? So i can choose, when i play out, whether to play with my normal 4 track deck set up synced with maschine, or whether i just want to play with timecode vinyl, or CDJ.

Should i set up timecode vinyl, and then export the settings, and then just load up which ever settings i want to use (normal, or time code cdjs or vinyl), is that right? Can i swap through them just like that when i want?

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 4:33pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/2 "2013-10-26T16:33:23Z")

</div>

In case I confused anyone, I want to be able to swap between JUST using the laptop for decks, to using timecode vinyl decks. I’d want everything else to remain the same like FX etc, but of course just be able to timecode vinyls, and then import settings to be able to go back to using laptop decks..

---

<div class="post-metadata">

**Author:** ![makar1](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@makar1](https://forum.djtechtools.com/u/makar1)\
**Post date:** [October 26, 2013, 6:13pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/3 "2013-10-26T18:13:23Z")

</div>

Click a deck letter and choose Scratch Control?

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 6:18pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/4 "2013-10-26T18:18:10Z")

</div>

Is that all I have to do? Of course apart from using 2 extra RCA cables to connect, and setting the 2 Traktor decks that I want to use as timecode to ‘phono’ in the audio 10 control prefs. That’s it?

I don’t need to actually do anything else?

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 6:21pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/5 "2013-10-26T18:21:29Z")

</div>

Two things I noticed today, I can hear a kind of hi-freq beep noise when I’m using timecode vinyl.. Not sure if this is just a calibration issue or not, and secondly, I couldn’t adjust the tempo on the Turntable of tracks I was playing..

---

<div class="post-metadata">

**Author:** ![makar1](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@makar1](https://forum.djtechtools.com/u/makar1)\
**Post date:** [October 26, 2013, 6:29pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/6 "2013-10-26T18:29:30Z")

</div>

You need to set the correct audio input routing yes. You shouldn’t be hearing the control tone unless you have one of your decks set to Live Input or have Direct Thru enabled somewhere.

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 6:32pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/7 "2013-10-26T18:32:39Z")

</div>

Okay cool. Strangely I can hear the tone noise, I’ll have a further look at the settings and see. Do you have any idea why I can’t adjust the the tempo on the TT’s?

---

<div class="post-metadata">

**Author:** ![makar1](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@makar1](https://forum.djtechtools.com/u/makar1)\
**Post date:** [October 26, 2013, 6:42pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/8 "2013-10-26T18:42:25Z")

</div>

Can you control the track at all with the timecode vinyl?

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 6:47pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/9 "2013-10-26T18:47:56Z")

</div>

Yep, I have full control of my tracks with the timecode vinyl, but when I try to speed the record up manual without using the vari-speed and the tracks just jumps and I loose my beat match.

---

<div class="post-metadata">

**Author:** ![makar1](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@makar1](https://forum.djtechtools.com/u/makar1)\
**Post date:** [October 26, 2013, 6:53pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/10 "2013-10-26T18:53:22Z")

</div>

Do you have Sync turned on?

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 6:59pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/11 "2013-10-26T18:59:15Z")

</div>

Nope, I made sure I had that turned off. In thinking it might be to do with my global section prefs, I have ‘master’ ticked, I’ll try setting it to auto maybe?

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 7:03pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/12 "2013-10-26T19:03:05Z")

</div>

Should I have the two RCA’s going from the audio 2 to the phono or line inputs of my mixer? I’ve had them in line…

---

<div class="post-metadata">

**Author:** ![makar1](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@makar1](https://forum.djtechtools.com/u/makar1)\
**Post date:** [October 26, 2013, 7:04pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/13 "2013-10-26T19:04:54Z")

</div>

Sound card outputs always go to the line inputs.

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 7:47pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/14 "2013-10-26T19:47:27Z")

</div>

That’s all fine then, no idea why I’m having problems. My calibration looks bad tho, has yellow lines going through the blue circle, and has a big red arrow in the middle of it…

---

<div class="post-metadata">

**Author:** ![Hippie](https://avatars.discourse-cdn.com/v4/letter/h/ac8455/32.png) [@Hippie](https://forum.djtechtools.com/u/Hippie)\
**Post date:** [October 26, 2013, 8:17pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/15 "2013-10-26T20:17:23Z")

</div>

Check your turntable ground (earth) wires.

Is the high pitch tone just the sound of the timecode vinyl coming from the needle?  
Turn your amp or speakers down and see if the volume of the high pitch tone changes too.

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 26, 2013, 8:35pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/16 "2013-10-26T20:35:21Z")

</div>

I’ve cut and readjusted earth cables and the warning message has changed from deck B, to deck A now, really dont know why it keeps saying it. and im really not sure, its just constant, i cant hear it when i turn the volume high up tho. Main worry is the calibration icon, with the red arrow in the middle of it, also, is there supposed to be a line going through the circle?

---

<div class="post-metadata">

**Author:** ![Kaek](https://avatars.discourse-cdn.com/v4/letter/k/3ec8ea/32.png) [@Kaek](https://forum.djtechtools.com/u/Kaek)\
**Post date:** [October 28, 2013, 6:49am UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/17 "2013-10-28T06:49:00Z")

</div>

If you hear a high pitched control tone coming from the needle itself that is normal.

---

<div class="post-metadata">

**Author:** ![Superfreak](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/superfreak/32/10706_2.png) [@Superfreak](https://forum.djtechtools.com/u/Superfreak)\
**Post date:** [October 28, 2013, 1:37pm UTC](https://forum.djtechtools.com/t/switching-between-using-traktor-for-timecode-and-non-timecode/61615/18 "2013-10-28T13:37:59Z")

</div>

> [@Kaek](#):
>
> If you hear a high pitched control tone coming from the needle itself that is normal.

Okay that’s good to know then, when I spin the timecode vinyl the pitch of the tone changes along too, so I guessed it’s just normal. I’m having problems with it still though, it keeps saying “right deck disconnected, check cables”.. All my RCA cables are in properly, and it keeps telling me there is 'ground hum, check grounding wires", I have earthed everything properly, so confused in what’s happening here also..

Last thing. The calibration, what is the visual icon supposed to look like, an orange circle? Because mine is a blue circle with an a orange line in the middle, that normal?
