I keep getting this problem on one of my decks, when a song will midway through start to reverse, and the timecode calibration will mess up. I’ve tried changing needles, adjusting the anti-skate to maximum, adding more pressure to the counter-weight, reversing the counterweight so its adding huge amounts of pressure to the vinyl, loosening the tonearm slightly to prevent it being drawn back to the rest, changing the vinyl, cleaning the contacts and setting up the technic with a spirit level and none of these things seem to work.
Are there any other suggestions I should try? There isn’t too much play in the platter also, as i’ve checked.
The only thing you didnt mention was the phono cables.
Ive had this with my 1210’s before, I had to piss about with the connection until it was sound. Are you still using the stock cables? I found I had to crush the stock connectors a bit to get goood contact.
The longer term plan though is to replace them completely.
Cheers I’ll check them tomorrow, i think they’re stock cables though i’ll check them, i’ll also try cleaning the phono connectors to see if there’s maybe any dirt causing bad connection!
Just so y’all know, there’s also a way to reverse the audio routing through traktor’s audio output settings that accomplishes the same thing without having to screw with the cables.
Nothing to add, bad contacts tend to make this happen but here’s a quick anecdote :
When playing at home once, a lil’ dust nugget just popped out of nowhere and got stuck on one of my concordes in such a way that deck immediately started playing backwards
