# Traktor Pro and Live on Mac **URL:** \ **Category:** General Discussion\ **Created:** [December 31, 2008, 12:42am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827 "2008-12-31T00:42:59Z")\ **Posts on this page:** 19\ **Page:** 1
**Author:** ![laurens](https://avatars.discourse-cdn.com/v4/letter/l/85f322/32.png) [@laurens](https://forum.djtechtools.com/u/laurens)\ **Post date:** [December 31, 2008, 12:42am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/1 "2008-12-31T00:42:59Z")
**Traktor Pro and Live on Mac** Not sure if this has been covered for mac…the whole routing Traktor into Live thing but I found a good tool for Mac callled “Jack”. It uses virtual audiop cables and is pretty easy to use, low latency and cpu load meter. I have just been playing round and got each of the 4 decks in Traktor to run through individual channels in Live. I had seen Ean’s write up on it but wasn’t sure if it was being done on mac… [http://www.jackosx.com/](http://www.jackosx.com/) ---
**Author:** ![JesC](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jesc/32/10376_2.png) [@JesC](https://forum.djtechtools.com/u/JesC)\ **Post date:** [December 31, 2008, 12:52am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/2 "2008-12-31T00:52:41Z")
thanks for the info, ill check it out. ---
**Author:** ![kilbot](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/kilbot/32/15106_2.png) [@kilbot](https://forum.djtechtools.com/u/kilbot)\ **Post date:** [December 31, 2008, 3:46am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/3 "2008-12-31T03:46:15Z")
i’ve been experimenting with the same thing, but using Soundflower on my my macbook. seems pretty straight forward and easy. but i havent tried anything crazy like syncing a track in traktor and one in ableton :S ---
**Author:** ![laurens](https://avatars.discourse-cdn.com/v4/letter/l/85f322/32.png) [@laurens](https://forum.djtechtools.com/u/laurens)\ **Post date:** [December 31, 2008, 4:11am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/4 "2008-12-31T04:11:53Z")
It’s super easy to sync the tempo for ableton to follow traktor if thats what you mean. Just set the Traktor Virtual Midi Output to active, tick send midi clock. Skip to Live Preferences, Midi Sync, Turn On Traktor Virtual Output options as Input. Go to the main window, top left you should see a flashing square next to the EXT, this means Live is receiving an external midi signal, to enable it highlight EXT. Play with the tempo in Traktor and it should translate to Live. ---
**Author:** ![BentoSan](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bentosan/32/15028_2.png) [@BentoSan](https://forum.djtechtools.com/u/BentoSan)\ **Post date:** [December 31, 2008, 10:23am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/5 "2008-12-31T10:23:30Z")
We metioned this on the blog a while back, Read this artcle: [Smart Mixing Traktor into Ableton - 4 Mac - DJ TechTools](http://www.djtechtools.com/2008/05/16/smart-mixing-traktor-into-ableton-4-mac/) ---
**Author:** ![jgcamil](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jgcamil/32/16167_2.png) [@jgcamil](https://forum.djtechtools.com/u/jgcamil)\ **Post date:** [January 3, 2009, 1:30am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/6 "2009-01-03T01:30:03Z")
> [@kilbot](#): > > i’ve been experimenting with the same thing, but using Soundflower on my my macbook. > seems pretty straight forward and easy. but i havent tried anything crazy like syncing a track in traktor and one in ableton :S Hi, I downloaded Soundflower too but havent been able to configure it properly with Pro / Ableton. Any ideas on how to achieve routing? I have an Audio8 soundcard.. Thx ---
**Author:** ![BentoSan](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bentosan/32/15028_2.png) [@BentoSan](https://forum.djtechtools.com/u/BentoSan)\ **Post date:** [January 3, 2009, 6:07am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/7 "2009-01-03T06:07:44Z")
jgcamil - did you follow the tutorial link i gave in my last post ? ---
**Author:** ![necromancer](https://avatars.discourse-cdn.com/v4/letter/n/ac91a4/32.png) [@necromancer](https://forum.djtechtools.com/u/necromancer)\ **Post date:** [January 3, 2009, 6:25pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/8 "2009-01-03T18:25:10Z")
> [@BentoSan](#): > > We metioned this on the blog a while back, Read this artcle: [Smart Mixing Traktor into Ableton - 4 Mac - DJ TechTools](http://www.djtechtools.com/2008/05/16/smart-mixing-traktor-into-ableton-4-mac/) How would you do this if you were using Traktor Scratch Pro instead of Traktor 3 controlled by MIDI? I believe Traktor Scratch requires audio output be routed back into the mixer (and therefore the club) in order to work properly, but I’m not sure. Is there a way for us Traktor Scratch users to harness the same synchronization power with Traktor+Ableton? ---
**Author:** ![BentoSan](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bentosan/32/15028_2.png) [@BentoSan](https://forum.djtechtools.com/u/BentoSan)\ **Post date:** [January 3, 2009, 6:47pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/9 "2009-01-03T18:47:39Z")
You couldnt do this with vinyl timecode because you would be using the jackdmp driver instead of the audio8 drivers - so the “scratch” part of traktor scratch wouldnt function. Complain to NI about having to have “authorised” soundcards - thats a good start. Another alternative is to have ms pinky convert the vinyl timecode into a midi stream which is then used by Traktor Pro :\ Not exactly the most friendly setup in the world, but it is possible. ---
**Author:** ![jgcamil](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jgcamil/32/16167_2.png) [@jgcamil](https://forum.djtechtools.com/u/jgcamil)\ **Post date:** [January 3, 2009, 7:18pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/10 "2009-01-03T19:18:17Z")
> [@BentoSan](#): > > jgcamil - did you follow the tutorial link i gave in my last post ? seems i didnt… ill give it a read! One thing… Jack OSX page it does not support 10.5.6.. 😞 guess Ill have to wait until they release the support version. ---
**Author:** ![jgcamil](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jgcamil/32/16167_2.png) [@jgcamil](https://forum.djtechtools.com/u/jgcamil)\ **Post date:** [January 27, 2009, 7:20am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/11 "2009-01-27T07:20:19Z")
Hey Bentosan, Quick one… if I only want to route the MASTER of Tpro into Ableton, instead of the 4 channels using internal mixer.. possible? I was thinking on choosing internal mixer, output of traktor master into jack and the rest remains the same… Thoughts? ---
**Author:** ![BentoSan](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bentosan/32/15028_2.png) [@BentoSan](https://forum.djtechtools.com/u/BentoSan)\ **Post date:** [January 27, 2009, 7:26am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/12 "2009-01-27T07:26:48Z")
> [@jgcamil](#): > > Hey Bentosan, > > Quick one… if I only want to route the MASTER of Tpro into Ableton, instead of the 4 channels using internal mixer.. possible? > I was thinking on choosing internal mixer, output of traktor master into jack and the rest remains the same… > > Thoughts? Yup, what you just said will work - though personally i dont see why anyone would want to do such a thing as then you remove the possibility of applying effects in Ableton to only one of your decks. Also you wont be able to use a smartmixer. The only advantage to this approach is that you can use the EQ’s inside of Traktor Pro. ---
**Author:** ![jgcamil](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jgcamil/32/16167_2.png) [@jgcamil](https://forum.djtechtools.com/u/jgcamil)\ **Post date:** [January 27, 2009, 3:13pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/13 "2009-01-27T15:13:32Z")
Ahh, so let me see if I understand correctly: - Doing this will only let me apply the fx to ONE deck and not the master output. - I will be able to use my Traktor fx (desired) Any ideas on how to preserve my internal eqs while routing the MASTER into ableton so I can use the compressors? Also: with JackOSX, do you think is possible to route Traktor into Izotope Ozone to get similar compressor results in Live? A big question I have on this idea is that Izotope works in 64bits, and this is not compatible with the Audio 8Dj… am I correct? ---
**Author:** ![nemo](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/nemo/32/14102_2.png) [@nemo](https://forum.djtechtools.com/u/nemo)\ **Post date:** [January 27, 2009, 3:20pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/14 "2009-01-27T15:20:34Z")
> [@jgcamil](#): > > seems i didnt… ill give it a read! > One thing… Jack OSX page it does not support 10.5.6.. 😞 guess Ill have to wait until they release the support version. anuary 16, 2009 - Released updated version 0.80, which updates JackRouter to allow it to be selected as the default system audio device again, addressing an issue introduced by OS X 10.5.6. It also updates JackPilot to ensure that available sample rates for each device are now retrieved more reliably. Finally, it updates the Jackdmp server to the latest SVN version (1.91). Sure it does not work? 🙂 ---
**Author:** ![tekki](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/tekki/32/12829_2.png) [@tekki](https://forum.djtechtools.com/u/tekki)\ **Post date:** [January 27, 2009, 3:35pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/15 "2009-01-27T15:35:43Z")
nemo can be unforgiving, jgcamil. 😉 ---
**Author:** ![BentoSan](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bentosan/32/15028_2.png) [@BentoSan](https://forum.djtechtools.com/u/BentoSan)\ **Post date:** [January 27, 2009, 3:49pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/16 "2009-01-27T15:49:02Z")
> [@jgcamil](#): > > Ahh, so let me see if I understand correctly: > > - Doing this will only let me apply the fx to ONE deck and not the master output. > - I will be able to use my Traktor fx (desired) > > Any ideas on how to preserve my internal eqs while routing the MASTER into ableton so I can use the compressors? > > Also: with JackOSX, do you think is possible to route Traktor into Izotope Ozone to get similar compressor results in Live? A big question I have on this idea is that Izotope works in 64bits, and this is not compatible with the Audio 8Dj… am I correct? No if you do what you were saying when you apply an effect it will put it on the master mix. If you route the individual decks into Ableton then you can apply effects onto individual decks - if you can them mix the audio into a single channel (the master channel) which you will then put your mastering VST effects on. You cannot EQ and be in external mode at the same time - they took this out of traktor pro as it was confusing some users. Id sugest +1ing on this feature request thead on the traktor forum - [http://www.nativeinstruments.de/forum\_de/showthread.php?t=73085](http://www.nativeinstruments.de/forum_de/showthread.php?t=73085) Instead you will have to use Abletons EQ’s if you want to use external mode and route the decks out individually. If you route the decks out individually you can then mix them into a single channel which you can apply your mastering vst’s too the master channel. Izotope is a VST plugin, so you can run that on your master channel inside Ableton live if you wish. Seriously, if you are going though the effort of routing your audio into Ableton i would highly advise using external mode to route the decks onto indivual Ableton channels. This will allow you alot more freedom of creativity than just piping only the master channel into Ableton. ---
**Author:** ![JuanSOLO](https://avatars.discourse-cdn.com/v4/letter/j/9de0a6/32.png) [@JuanSOLO](https://forum.djtechtools.com/u/JuanSOLO)\ **Post date:** [February 10, 2009, 11:53am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/17 "2009-02-10T11:53:16Z")
> [@laurens](#): > > It’s super easy to sync the tempo for ableton to follow traktor… …Play with the tempo in Traktor and it should translate to Live. It seems to work, just not very well. The temp fluctuates a lot in Ableton. Makes my beats sound drunk. Any other solutions? I heard syncing with some kind of external master clock thingamajiggy works better. Not sure though. ---
**Author:** ![BentoSan](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/bentosan/32/15028_2.png) [@BentoSan](https://forum.djtechtools.com/u/BentoSan)\ **Post date:** [February 10, 2009, 12:27pm UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/18 "2009-02-10T12:27:52Z")
> [@JuanSOLO](#): > > It seems to work, just not very well. The temp fluctuates a lot in Ableton. Makes my beats sound drunk. > > Any other solutions? I heard syncing with some kind of external master clock thingamajiggy works better. Not sure though. Midi clock sucks, you need to sync the two by hand. Read this thread and that should help you out- [http://www.djtechtools.com/forum/search.php?searchid=83957](http://www.djtechtools.com/forum/search.php?searchid=83957) ---
**Author:** ![JuanSOLO](https://avatars.discourse-cdn.com/v4/letter/j/9de0a6/32.png) [@JuanSOLO](https://forum.djtechtools.com/u/JuanSOLO)\ **Post date:** [February 11, 2009, 6:28am UTC](https://forum.djtechtools.com/t/traktor-pro-and-live-on-mac/1827/19 "2009-02-11T06:28:29Z")
> [@BentoSan](#): > > Read this thread and that should help you out- [http://www.djtechtools.com/forum/search.php?searchid=83957](http://www.djtechtools.com/forum/search.php?searchid=83957) The link takes me to a page that says what I’m looking for is not here.