# Traktor Slicer Idea **URL:** \ **Category:** Controller Mappings\ **Created:** [April 9, 2011, 4:40pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560 "2011-04-09T16:40:32Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 9, 2011, 4:40pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/1 "2011-04-09T16:40:32Z")
**Traktor Slicer Idea** So, you’ve probably seen that Novation Twitch which enables a god-level feature in Serato, the slicer. This is literally the shit, an on the fly MPC built into a DJ interface, and as soon as I saw it I looked at my new shiny Traktor 2, and thought “… Why can’t you do that?” Looking around, a lot of people are getting moist over this slicer, and got to thinking how this could be done in Traktor. And you know what? I have no idea. However, I looked at the sample decks and immediately thought “… Hello” I’m looking for a way to grab samples for bars of audio, for example, I want Traktor to grab a sample from 7 or 8 bars away. I think this could be possibly be achieved with some abuse of the beatjump, but obviously we don’t want it to glitch the audio. So I call on you, Traktor Cartographers, (Traktographers?), do you know how this could be achieved? This is literally the missing piece from making a slicer mapping for the Midi fighter (which I don’t have) and Launchpad (Which I do have!), and it’s really boggling me. ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 9, 2011, 5:29pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/2 "2011-04-09T17:29:51Z")
**Kinda got it!** Well, I’ve got something close to the slicer, btt takes pressing a button 8 times on the beat. It acts just like the slicer when it’s set up, but obviously thats not what we’re after, we want one button press to set it all up. I just set it up on like an 8 button super combo, it’s immense. I had this in mind when I saw the sample decks of the S4, but that slicer in twitch is just, arrgghh _dribble_ ---
**Author:** ![Conall](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/conall/32/13634_2.png) [@Conall](https://forum.djtechtools.com/u/Conall)\ **Post date:** [April 9, 2011, 5:31pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/3 "2011-04-09T17:31:30Z")
i dont think its possible, i imagine it would have been done well before now. It’s not exactly an original idea. ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 9, 2011, 6:00pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/4 "2011-04-09T18:00:13Z")
Well, I know it’s not original, like I said it’s an MPC essentially. There’s an earlier Traktor tutorial video that Ean Golden did where he tries something similar with the beatslicer but it doesn’t really work like the MPC. ---
**Author:** ![LopDog](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lopdog/32/16199_2.png) [@LopDog](https://forum.djtechtools.com/u/LopDog)\ **Post date:** [April 9, 2011, 10:01pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/5 "2011-04-09T22:01:35Z")
> [@Sambo](#): > > Well, I’ve got something close to the slicer, btt takes pressing a button 8 times on the beat. It acts just like the slicer when it’s set up, but obviously thats not what we’re after, we want one button press to set it all up. > > I just set it up on like an 8 button super combo, it’s immense. I had this in mind when I saw the sample decks of the S4, but that slicer in twitch is just, arrgghh _dribble_ You can upload a videosample of your super combo ? i wish listen that for new idea about the slicer ---
**Author:** ![Remote](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/remote/32/16176_2.png) [@Remote](https://forum.djtechtools.com/u/Remote)\ **Post date:** [April 10, 2011, 2:54am UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/6 "2011-04-10T02:54:17Z")
> [@Conall](#): > > i dont think its possible, i imagine it would have been done well before now. It’s not exactly an original idea. This is correct I tried to build a clone of it the other night and I got as far as functioning jump and loop. But traktor only supports 1 2 4 8 16 32 jumps so you can’t jump to 3 5 6 7. Which would be fine if you can stack the jumps but you can’t, if you bind a 1 jump and 2 jump to the same button it will only jump 1 beat instead of the hoped 3 beatjump. ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 10, 2011, 4:00am UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/7 "2011-04-10T04:00:31Z")
@LopDog, Sure, I’ll try and set up a recording to show you, @Remote, I know, how irritating is that. I guess I’ll have to settle for my 4/8 button presses! ---
**Author:** ![Remote](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/remote/32/16176_2.png) [@Remote](https://forum.djtechtools.com/u/Remote)\ **Post date:** [April 10, 2011, 4:43am UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/8 "2011-04-10T04:43:12Z")
@Sambo… solved it 😃 Stack Cue/Moves BUT put them on modifers and then have the button set to auto inc the same modifer. I’ve only tested it roughly then but it might just work. Seems clean enough with the audio too. ---
**Author:** ![derschaich](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/derschaich/32/10725_2.png) [@derschaich](https://forum.djtechtools.com/u/derschaich)\ **Post date:** [April 10, 2011, 8:22am UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/9 "2011-04-10T08:22:17Z")
pleas do a video/ share the mapping! I’m damn curious about this, and had a couple of thoughts, too. ---
**Author:** ![LopDog](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lopdog/32/16199_2.png) [@LopDog](https://forum.djtechtools.com/u/LopDog)\ **Post date:** [April 10, 2011, 9:05am UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/10 "2011-04-10T09:05:39Z")
@sambo Thank you ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 10, 2011, 3:47pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/11 "2011-04-10T15:47:13Z")
I’m having a fiddle with it Remote, but I’m not getting any results? Do you mean but the 1 bar jump and 2 bar jump on the same button, but put the 2 bar on one modifier up, and have the button also increase the modifier? ---
**Author:** ![MiL0](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mil0/32/12337_2.png) [@MiL0](https://forum.djtechtools.com/u/MiL0)\ **Post date:** [April 10, 2011, 4:42pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/12 "2011-04-10T16:42:27Z")
> [@Remote](#): > > This is correct I tried to build a clone of it the other night and I got as far as functioning jump and loop. But traktor only supports 1 2 4 8 16 32 jumps so you can’t jump to 3 5 6 7. > Which would be fine if you can stack the jumps but you can’t, if you bind a 1 jump and 2 jump to the same button it will only jump 1 beat instead of the hoped 3 beatjump. this might be possible using some intermediary software such as Bomes, Glovepie or Autohotkey. For example, I’ve written scripts in AHK that will process a series of midi commands quickly in succession simply by inputting one midi CC note. If you can explain _exactly_ what you need Traktor to do, in midi terms, then I’ll see if I can write something in AHK that will achieve this. ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 10, 2011, 5:09pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/13 "2011-04-10T17:09:47Z")
Oh shit, I didn’t even think about using an external program! Upon further study of the Twitcher’s slicer, It’s become apparent that it’s actually like 8 portable hot cues. I’ve basically got every feature set up except the fact that it doesn’t carry on playing from where the end of the sample plays, see the way I have it arranged is that when a sample plays, it puts the x-fader towards the deck not in focus, therefore muting the deck until the sample button is released. ---
**Author:** ![MiL0](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mil0/32/12337_2.png) [@MiL0](https://forum.djtechtools.com/u/MiL0)\ **Post date:** [April 11, 2011, 12:29pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/14 "2011-04-11T12:29:02Z")
so what do you need the external program to do, midi-wise? with ahk it’s possible for it to scan Traktor for visual changes. For example, when it ‘sees’ that the x-fader is in a certain position, you could make AHK trigger further midi events. In this way it’s possible to create midi event functions that are extremely customisable. let me know what you need it to do - would be an interesting challenge 🙂 ps - also AHK allows you to export the program as a self contained midi executable (windows only) so you don’t need to run any weird programs at the same time (except for a virtual midi port). ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 11, 2011, 3:08pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/15 "2011-04-11T15:08:55Z")
If it could read where the beat marker is in respect to the loop, that would be ideal, but I’m assumign it takes set values, not relative values yeah? Ideally, I need to be able to change what commands are sent depending on the position of the loop. ---
**Author:** ![Remote](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/remote/32/16176_2.png) [@Remote](https://forum.djtechtools.com/u/Remote)\ **Post date:** [April 12, 2011, 4:28am UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/16 "2011-04-12T04:28:35Z")
I’ve got the night off tonight (YAYAAA) So I’ll do a write up. I’ve got a full solution for it now using the sampler to complete it. You guys seem to have the time to put into making this work, so I’ll rough up a prototype that works and someone else can fill it out (dupe controls to get all the ranges etc.) ---
**Author:** ![derschaich](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/derschaich/32/10725_2.png) [@derschaich](https://forum.djtechtools.com/u/derschaich)\ **Post date:** [April 12, 2011, 12:14pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/17 "2011-04-12T12:14:06Z")
nice, lets see what this end up like… pretty hyped!!! ---
**Author:** ![Remote](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/remote/32/16176_2.png) [@Remote](https://forum.djtechtools.com/u/Remote)\ **Post date:** [April 12, 2011, 12:26pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/18 "2011-04-12T12:26:01Z")
Uploaded with [ImageShack.us](http://imageshack.us) Will work. I was thinking you could set the loop recorder when you activate the slicer then have it set to 0 when your pressing a button (in a loop) and 100% when you release the button. BUT this wouldn’t have the loop recorder jump to the same point so you could get quite a choppy job. The other thing would be to put the loop in the sample slot, then try jumping it as well. Or maybe instead of the main all together just use a sample bank… need to run some more tests (which I didn’t tonight, I just slacked off on the couch). ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 12, 2011, 9:23pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/19 "2011-04-12T21:23:43Z")
Nice work, I’m makign headway with this sampler set up, there’s just a lot of glitches and streamlining that need to be done. Expect a video soon! (If I can find something to record it with) ---
**Author:** ![Sambo](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@Sambo](https://forum.djtechtools.com/u/Sambo)\ **Post date:** [April 14, 2011, 6:34pm UTC](https://forum.djtechtools.com/t/traktor-slicer-idea/22560/20 "2011-04-14T18:34:31Z")
Well, I’m proper stuck on this one, but I’m going to make a video soon showing what I have set up, and I’ll upload the mapping as well. (It’s on a Launchpad using Katapult) [Next page](https://forum.djtechtools.com/t/traktor-slicer-idea/22560.md?page=2)