# TTM57SL and Traktor Pro 3 **URL:** \ **Category:** General Discussion\ **Created:** [December 5, 2018, 6:07pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619 "2018-12-05T18:07:21Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![jprime](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jprime/32/12640_2.png) [@jprime](https://forum.djtechtools.com/u/jprime)\ **Post date:** [December 5, 2018, 6:07pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/1 "2018-12-05T18:07:21Z")
**TTM57SL and Traktor Pro 3** I’m just curious if anyone has used the newly updated Traktor Pro 3 with the Rane TTM57SL mixer running DVS. I understand the software claims to work with any DVS system now…if anyone has tried this specific setup I’m curious to hear how it worked. Cheers! ---
**Author:** ![SlayForMoney](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/slayformoney/32/14501_2.png) [@SlayForMoney](https://forum.djtechtools.com/u/SlayForMoney)\ **Post date:** [December 7, 2018, 6:23pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/2 "2018-12-07T18:23:13Z")
I think the biggest obstacle will be support for the Rane’s interface under Mac OS that is required to run TP3 (I know you had to do a workaround with some mac settings to be able to use it with SSL under Sierra but I don’t know was it about SSL or interface not being detected). Windows users can always use the generic ASIO4ALL drivers. Other than that, I see no problems. 57 got support for DVS with other software long ago in some firmware update if I remember correctly. ---
**Author:** ![jprime](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jprime/32/12640_2.png) [@jprime](https://forum.djtechtools.com/u/jprime)\ **Post date:** [December 12, 2018, 5:03pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/3 "2018-12-12T17:03:21Z")
Well, I upgraded to Traktor Pro 3 last night and tried to set up my 57 for DVS. No dice. I’ll try some research today, but for starters I thought it was weird that, when connected, in the Auio settings in Traktor the 57 appears as 2 possible choices; TTM57SL LIne 1 and TTM57SL Line 2. 👀 ---
**Author:** ![the\_bastet](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/the_bastet/32/56295_2.png) [@the\_bastet](https://forum.djtechtools.com/u/the_bastet)\ **Post date:** [December 12, 2018, 6:51pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/4 "2018-12-12T18:51:18Z")
> [@jprime](#): > > Well, I upgraded to Traktor Pro 3 last night and tried to set up my 57 for DVS. No dice. > > I’ll try some research today, but for starters I thought it was weird that, when connected, in the Auio settings in Traktor the 57 appears as 2 possible choices; TTM57SL LIne 1 and TTM57SL Line 2. 👀 Ensure you are using ASIO ---
**Author:** ![jprime](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jprime/32/12640_2.png) [@jprime](https://forum.djtechtools.com/u/jprime)\ **Post date:** [December 12, 2018, 7:53pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/5 "2018-12-12T19:53:20Z")
> [@the\_bastet](#): > > Ensure you are using ASIO Am using a Macbook Pro / OSX here, pretty sure Asio is specifically for Windows (?) ---
**Author:** ![the\_bastet](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/the_bastet/32/56295_2.png) [@the\_bastet](https://forum.djtechtools.com/u/the_bastet)\ **Post date:** [December 13, 2018, 1:57am UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/6 "2018-12-13T01:57:41Z")
> [@jprime](#): > > Am using a Macbook Pro / OSX here, pretty sure Asio is specifically for Windows (?) You are correct. I would not be able to answer your question as I do not use OSX for audio. I have tested the TTM57 with Traktor 3 on WIndows, however with success. ---
**Author:** ![SlayForMoney](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/slayformoney/32/14501_2.png) [@SlayForMoney](https://forum.djtechtools.com/u/SlayForMoney)\ **Post date:** [December 13, 2018, 10:23am UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/7 "2018-12-13T10:23:27Z")
> [@jprime](#): > > Well, I upgraded to Traktor Pro 3 last night and tried to set up my 57 for DVS. No dice. > > I’ll try some research today, but for starters I thought it was weird that, when connected, in the Auio settings in Traktor the 57 appears as 2 possible choices; TTM57SL LIne 1 and TTM57SL Line 2. 👀 Tried to aggregate the interface into one using the mac tool for that? ---
**Author:** ![jprime](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jprime/32/12640_2.png) [@jprime](https://forum.djtechtools.com/u/jprime)\ **Post date:** [December 13, 2018, 5:46pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/8 "2018-12-13T17:46:06Z")
> [@SlayForMoney](#): > > Tried to aggregate the interface into one using the mac tool for that? Great tip - will look into that and report back. Cheers ---
**Author:** ![SlayForMoney](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/slayformoney/32/14501_2.png) [@SlayForMoney](https://forum.djtechtools.com/u/SlayForMoney)\ **Post date:** [December 13, 2018, 7:24pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/9 "2018-12-13T19:24:43Z")
There’s probably a easier way as that seems like a heluva workaround but hey, if it works it works. Check on VDJ forums, they have been in the same boat as you and for a lot longer. It’s amazing how with this TP3 version and TTM57 with added controller like X1 you get a cheap yet great combo. ---
**Author:** ![SlayForMoney](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/slayformoney/32/14501_2.png) [@SlayForMoney](https://forum.djtechtools.com/u/SlayForMoney)\ **Post date:** [December 14, 2018, 9:41am UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/10 "2018-12-14T09:41:26Z")
> [@SlayForMoney](#): > > 57 got support for DVS with other software long ago in some firmware update if I remember correctly. Did a little bit of research and seems this is not true. Without workarounds, DVS is possible only with SSL software. Inputs are not normally sent through USB and it’s controlled by the software (SSL). Rane never added a utility or firmware that would enable that switch without SSL. Maybe, just maybe, try running SSL in the background to see if that does the trick (if it doesn’t crash Traktor lol). Also, mixer buttons for SSL don’t output midi so it’s not possible to map them to other software (without writing some kind of custom HID/MIDI translator like Bome). You basically have TTM56 with Audio2 attached 😞 So, with Traktor your best bet would be to add some midi/hid control over the decks (considering it’s a scratch mixer better hid to have good platter response). CDJ-400 maybe? Not the best choice for scratching but anything better (read: more expensive) just doesn’t make sense to me (CDJ-900 is better used as standalone). ---
**Author:** ![jprime](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jprime/32/12640_2.png) [@jprime](https://forum.djtechtools.com/u/jprime)\ **Post date:** [December 14, 2018, 6:52pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/11 "2018-12-14T18:52:00Z")
Seems like even if it is possible it’s a bit sketchy. Here I am stuck with a useless TTM57SL between my turntables. Might have to consider that new S4 MK3 or this upcoming Mixars Primo unit. ---
**Author:** ![Swift](https://avatars.discourse-cdn.com/v4/letter/s/13edae/32.png) [@Swift](https://forum.djtechtools.com/u/Swift)\ **Post date:** [December 20, 2018, 11:45pm UTC](https://forum.djtechtools.com/t/ttm57sl-and-traktor-pro-3/77619/12 "2018-12-20T23:45:09Z")
> [@jprime](#): > > Seems like even if it is possible it’s a bit sketchy. > > Here I am stuck with a useless TTM57SL between my turntables. Might have to consider that new S4 MK3 or this upcoming Mixars Primo unit. Could always do what a lot of traktor guys do and just come to Serato. I just did.