The problem is that when I connect the vci to the usb hub it shows unknown, and can’t be used. The led power on the vci is on but the flashy lights that are on the buttons and jogwheels aren’t on. The launchpad when plugged into the usb hub gets recognised but the lights don’t turn on either. If I didn’t plug the soundcard into my laptop and the vci to the laptop my setup works. But with some serious lag on the launchpad, as in laggy traktor. Is it my computers fault or the usb hub? Any recommendations? Im on a budget since im still in high school and dont want to buy more usb hubs if that isn’t the problem.
Yes it is turned to usb power, is it not enough. Like I wanted to buy the Dlink Dub 4 but I don’t see any difference with the usb I already own. With the vci in the laptop and the audio 2 and launchpad in the usb hub I think its set at around 60. Not sure I have to confirm it afterschool. But I heard that you need to put the audio 2 in the laptop usb, and the only way this setup works for me is putting the vci to the laptop or its unrecognised in the usb hub. thanks 4 reply.
Thanks for the links. And what belkin usb are u using? So its not my computer problem cas it lags traktor audio and the program itself like the program turns slow…
If traktor’s lagging, the first thing to check is latency. Increase it til the problem goes away, generally shouldn’t have to be more than 15ms total. It’s in prefs > audio setup