# Using sanwa triangle buttons on arcade mod **URL:** \ **Category:** Hardware: Controllers, Mods and Gear\ **Created:** [February 9, 2010, 4:31am UTC](https://forum.djtechtools.com/t/using-sanwa-triangle-buttons-on-arcade-mod/8871 "2010-02-09T04:31:45Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![tonyg](https://avatars.discourse-cdn.com/v4/letter/t/f14d63/32.png) [@tonyg](https://forum.djtechtools.com/u/tonyg)\ **Post date:** [February 9, 2010, 4:31am UTC](https://forum.djtechtools.com/t/using-sanwa-triangle-buttons-on-arcade-mod/8871/1 "2010-02-09T04:31:45Z")
**Using sanwa triangle buttons on arcade mod** does anyone know if the arcade mod, would work using the triangle sanwa obsf-24tr buttons? they have dimensions of Mounting whole: 18 mm x 15 mm (0.709 inch x 0.591 inch), snap-in action (no thread, no screwing). Longest distance: 33.2 mm (1.307 inch), installation depth: ca. 33 mm (1.3 inch), breadth of the microswitch terminals: 2.8 mm (0.110 inch). -thanks ---
**Author:** ![super\_duper](https://avatars.discourse-cdn.com/v4/letter/s/e47774/32.png) [@super\_duper](https://forum.djtechtools.com/u/super_duper)\ **Post date:** [February 14, 2010, 9:31am UTC](https://forum.djtechtools.com/t/using-sanwa-triangle-buttons-on-arcade-mod/8871/2 "2010-02-14T09:31:43Z")
I think you can figure it out (23mm radius, 32mm deep are the buttons). If you can get the holes made correctly, then I don’t see any reason why they wouldn’t work. Have you searched and thought about this topic at all? ---
**Author:** ![tonyg](https://avatars.discourse-cdn.com/v4/letter/t/f14d63/32.png) [@tonyg](https://forum.djtechtools.com/u/tonyg)\ **Post date:** [February 15, 2010, 6:11pm UTC](https://forum.djtechtools.com/t/using-sanwa-triangle-buttons-on-arcade-mod/8871/3 "2010-02-15T18:11:56Z")
yea they should fit, and its a square opening thats needed so it should be easier then the round mod, i did order them ill post pics when i get them in.