VCI-100 and Mixer M8 USB Proel
hello, I have a VCI 100 and wanted to buy a MIXER USB used as a soundcard and that it has effects on the microphone and it gives me the opportunity to use my VCI with the pre listening. I found this product:
M8 Proel USB Mixer
Datasheet
System type : 8 inputs mixer with digital effects & USB
Power Supply : 18 V - 700 mA AC adapter included
Phantom power : + 48 V all mono input
Input Connectors : Mic Input Balanced XLR-F - Combo
Line Input Balanced TRS Jack
USB
Inputs : 6 MIC - 4 Line - 2 stereo line - USB
Input Sensitivity : Mic Input from 0 to -60 dB
Line Input from +20 to -40 dB
Input Impedance : Mic Input 2 Kohm
Line Input 10 Kohm
Output Connectors : Balanced TRS Jack and / or XLR-M - USB
Outputs : C\ROOM - MAIN MIX - ALT 3-4 - AUX 1 & 2 - PHONES - USB
Output Levels : MAIN MIX nom. out level +4 dBu - all other outputs 0 dBu - Maximum level all outputs +22 dBu
Headphones output impedance : min. impedance 32 ohm - max. out level (2x) 193 mW
Distortion (THD+N) : at +4dB, 1kHz < 0,008 %
Mono Input channel equalization : Lo Cut 75 Hz, 18 dB/oct.
HIGH (shelving) ±15 dB @ 12KHz
MID (peaking) ±15 dB @ 2.5KHz
LOW (shelving) ±15 dB @ 80Hz
Stereo Input Channel Equalization : HIGH (shelving) ±15 dB @ 12KHz
MID (peaking) ±15 dB @ 2.5KHz
LOW (shelving) ±15 dB @ 80Hz
Incorporated effects : HALL, ROOM, VOCAL and PLATE reverbs,
MONO, STEREO and TAP DELAY,
CHORUS and FLANGER,
REV + DELAY, REV + CHORUS and REV + FLANGER
16 step PRESET selector
16 step VARIATION selector
PEAK LED
MUTE and TAP DELAY switch
with LED indicator and footswitch
Noise : unweighted < -93 dBu
Weight : 3.1 kg(6.836lb )
Dimensions (W x H x D) : 28 x 8 x 35.2 cm
Notes : Carrying bag and 19” rack adapters included
I don’t know if this mixer can do the pre listening with only my VCI-100.
Someone can help me? There is another way to get what I want? or there are other product similar to that?
thanks