# Vci-100/traktor Pro "problem"  Please Help!

**URL:** <https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833>\
**Category:** General Discussion\
**Created:** [March 3, 2009, 4:36am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833 "2009-03-03T04:36:59Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![BADROK](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@BADROK](https://forum.djtechtools.com/u/BADROK)\
**Post date:** [March 3, 2009, 4:36am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/1 "2009-03-03T04:36:59Z")

</div>

**Vci-100/traktor Pro “problem” Please Help!**

I am new to all this so please help!!

I recently bought a VCI 100 w/o the software, so I went out and bought Traktor PRO. I loaded up it up, but I can’t get the VCI 100 to work with it. The buttons and jog wheels won’t work! I know there is a signal because in the traktor PRO window, up at top the MIDI light goes on when the buttons are pushed and I can play with the program with the keyboard only. I think it has to do with the mapping, which I don’t know what I am doing (I am new to this computer djing). I have a mac desktop, so I went to docs\<native ins.\<traktor\<settings\<midi mapping (which nothing shows up?), then i tried to do it manuelly in midi mapping…still nothing!! Then I seen some tsi files on this site here, but I don’t know how to load them up…lol! If anybody out there can please help out a new comer, Thanks!!

Also do I need a external sound card for mixing? Cause where I bought my software they told me I didn’t.

Badrok

---

<div class="post-metadata">

**Author:** ![JesC](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jesc/32/10376_2.png) [@JesC](https://forum.djtechtools.com/u/JesC)\
**Post date:** [March 3, 2009, 6:26am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/2 "2009-03-03T06:26:24Z")

</div>

under midi settings the vci should show up, make sure that you have and “X” next to the Vestax VCI-100. It should work if you have the proper .tsi loaded.

---

<div class="post-metadata">

**Author:** ![BADROK](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@BADROK](https://forum.djtechtools.com/u/BADROK)\
**Post date:** [March 3, 2009, 7:43am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/3 "2009-03-03T07:43:00Z")

</div>

I tried that. I must have a wrong tsi. How would I know or how can I load up a new one. I seen some on here but I don’t know how to upload them.

Thanks for the geting back

---

<div class="post-metadata">

**Author:** ![JesC](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jesc/32/10376_2.png) [@JesC](https://forum.djtechtools.com/u/JesC)\
**Post date:** [March 3, 2009, 9:27am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/4 "2009-03-03T09:27:00Z")

</div>

Open up Preferences\>Import\>Settings\>Midi Mappings\>Vestax VCI-100.tsi and you should be good.

---

<div class="post-metadata">

**Author:** ![BADROK](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@BADROK](https://forum.djtechtools.com/u/BADROK)\
**Post date:** [March 4, 2009, 12:23am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/5 "2009-03-04T00:23:18Z")

</div>

I have tried that, when I get to midi settings nothing shows up in that folder. That’s were I am lost! I don’t know whats going on? Is there a way to load an tsi file from here?

---

<div class="post-metadata">

**Author:** ![JesC](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/jesc/32/10376_2.png) [@JesC](https://forum.djtechtools.com/u/JesC)\
**Post date:** [March 4, 2009, 12:26am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/6 "2009-03-04T00:26:06Z")

</div>

sounds like traktor didnt install right. I would say reinstall T-PRO

---

<div class="post-metadata">

**Author:** ![Monika.mhz](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/monika.mhz/32/15066_2.png) [@Monika.mhz](https://forum.djtechtools.com/u/Monika.mhz)\
**Post date:** [March 4, 2009, 2:04am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/7 "2009-03-04T02:04:05Z")

</div>

Hi Badrock,

I’ve moved your thread to general discussion. The controller mappings is only for posting already made or in progress mappings. Please read READ ME FIRST \*\* Posting Instructions for more information as to why your thread has been moved. Please try to read the stickies in a forum before posting. Thanks!

Questions regarding how to map, etc should be asked in general discussion for the time being.

Thanks for helping us keep out forums neet and tidy!

---

<div class="post-metadata">

**Author:** ![BADROK](https://avatars.discourse-cdn.com/v4/letter/b/779978/32.png) [@BADROK](https://forum.djtechtools.com/u/BADROK)\
**Post date:** [March 4, 2009, 5:45am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/8 "2009-03-04T05:45:27Z")

</div>

I have done that a couple of times too! There is a signal going from the vci to the computer, the jog wheels and buttons don’t do anything but when they are pushed the midi light lights up on t-pro. I am thinking it has to do with the mapping.

Can anyone tell me how to map the vci to t-pro or tell me how to load a tsi file? I am new to this:eek:

---

<div class="post-metadata">

**Author:** ![gfocus](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/gfocus/32/10697_2.png) [@gfocus](https://forum.djtechtools.com/u/gfocus)\
**Post date:** [March 4, 2009, 6:11am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/9 "2009-03-04T06:11:21Z")

</div>

R T F M !!!

---

<div class="post-metadata">

**Author:** ![Monika.mhz](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/monika.mhz/32/15066_2.png) [@Monika.mhz](https://forum.djtechtools.com/u/Monika.mhz)\
**Post date:** [March 4, 2009, 6:32am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/10 "2009-03-04T06:32:36Z")

</div>

Please don’t type in all caps. The caps lock is just a few centimeters over.

kthxbai

---

<div class="post-metadata">

**Author:** ![Lecko](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lecko/32/13268_2.png) [@Lecko](https://forum.djtechtools.com/u/Lecko)\
**Post date:** [March 4, 2009, 9:37am UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/11 "2009-03-04T09:37:08Z")

</div>

Ive got this issue on my macbook, done 2 or 3 installs now and still the same, ive removed the plists aswell to make sure i get a fresh install.. LE loads and works fine but nothing in Tpro, very frustrating

---

<div class="post-metadata">

**Author:** ![cauito](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/cauito/32/16159_2.png) [@cauito](https://forum.djtechtools.com/u/cauito)\
**Post date:** [March 6, 2009, 2:36pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/12 "2009-03-06T14:36:19Z")

</div>

You should buy a external sound card. If you don’t, you can’t hear your cue.

To instal tsi: preferences\> (bottom in the window) load\>ok

---

<div class="post-metadata">

**Author:** ![MisterMoleyMole](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mistermoleymole/32/12910_2.png) [@MisterMoleyMole](https://forum.djtechtools.com/u/MisterMoleyMole)\
**Post date:** [March 6, 2009, 2:50pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/13 "2009-03-06T14:50:16Z")

</div>

ok …

1)Have you got a tsi file ???

2)Are there any mappings showing in the main window in the midi mapping section in the preferences window ???

**If yes to question 1 and no to question 2**

Open up traktor pro

In preferences you should see at the bottom a section called midi mapping

In the bottom left corner you should see a button labelled import .. press it

you should now see a standard open file dialogue box.

browse to the TSI you said you have in the first question and select and open or ok

Voila … you shoudl know see a load of mappings in the midi mappings window.

Now see if you can get it working.

**If No to question 1**

Download a TSI file from the midi map section at the top iof the page.

**If you have answered yes to Question 2**

Have you set up your audio / soundcard ?

Do you have tracks loaded into the decks when you are trying to get the jog wheels working ?

---

<div class="post-metadata">

**Author:** ![Lecko](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lecko/32/13268_2.png) [@Lecko](https://forum.djtechtools.com/u/Lecko)\
**Post date:** [March 6, 2009, 3:33pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/14 "2009-03-06T15:33:42Z")

</div>

Thanks for your replys

I have no issues using this setup on my iMac

I’m using a Numark DJ IO

Ive re-installed LE and upgraded to TPro 3 times now.

The Midi Mapping is not loading with TPro

When I go to import a TSI file there are no TSI in the Midi Mappings Place

When trying to import one from DJTT I get the error message and cannot use it

I am now getting a Kernel Panic when selecting my soundcard (just doing a fresh OS install now)

I have loaded tracks but have no control with the VCi

I’m doing a fresh install of everything now, so fingers crossed!

---

<div class="post-metadata">

**Author:** ![Lecko](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lecko/32/13268_2.png) [@Lecko](https://forum.djtechtools.com/u/Lecko)\
**Post date:** [March 6, 2009, 6:56pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/15 "2009-03-06T18:56:07Z")

</div>

Done all my fresh installs, still got the same issue, I downloaded the 1.6 TSI and tried to import that and got an error message

“Accessor information has unknown version, therefore it has been ignored”

Help 😞

---

<div class="post-metadata">

**Author:** ![MisterMoleyMole](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mistermoleymole/32/12910_2.png) [@MisterMoleyMole](https://forum.djtechtools.com/u/MisterMoleyMole)\
**Post date:** [March 6, 2009, 9:21pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/16 "2009-03-06T21:21:21Z")

</div>

> [@Lecko](#):
>
> Done all my fresh installs, still got the same issue, I downloaded the 1.6 TSI and tried to import that and got an error message
> 
> “Accessor information has unknown version, therefore it has been ignored”
> 
> Help 😞

what version of traktor are you using ???

i had this the other day with 1\_7 tsi but that was because i needed 1.1.1 at least. Although the 1\_6 i think should work with any traktor pro install.

If your still using traktor 3.? then thats your problem , you will need to go back to 1\_4 i think. Its available up above on the midi map tab

let me know how you get on

G

---

<div class="post-metadata">

**Author:** ![Lecko](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lecko/32/13268_2.png) [@Lecko](https://forum.djtechtools.com/u/Lecko)\
**Post date:** [March 6, 2009, 9:50pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/17 "2009-03-06T21:50:25Z")

</div>

I went straight from Traktor 3LE to Pro, This all works fine on my iMac, done 2 complete OS and Traktor installs now and still baffling?

I updated the LE but not the TPro because ive heard about stability issues, with 1.1.1, this is the same on my iMac aswell

Im really am lost with it now 😞

---

<div class="post-metadata">

**Author:** ![MisterMoleyMole](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/mistermoleymole/32/12910_2.png) [@MisterMoleyMole](https://forum.djtechtools.com/u/MisterMoleyMole)\
**Post date:** [March 6, 2009, 9:57pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/18 "2009-03-06T21:57:14Z")

</div>

What do you mean by stability issues I thought 1.1.1 was supposed to be more stable???

Anyway what version of traktot pro are you trying tinstall the tsi to??

What do you mean you updated LE but not pro ???

---

<div class="post-metadata">

**Author:** ![Lecko](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/lecko/32/13268_2.png) [@Lecko](https://forum.djtechtools.com/u/Lecko)\
**Post date:** [March 6, 2009, 10:15pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/19 "2009-03-06T22:15:22Z")

</div>

Oh I heard 1.1.1 had a few issues,

I ran the update from LE but not for TPro, I have updated TPro bus still nothing 😞

Driving me mad 😞

---

<div class="post-metadata">

**Author:** ![DvlsAdvct](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/dvlsadvct/32/15020_2.png) [@DvlsAdvct](https://forum.djtechtools.com/u/DvlsAdvct)\
**Post date:** [March 6, 2009, 10:16pm UTC](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833/20 "2009-03-06T22:16:25Z")

</div>

If the TSI was made in 1.1.1 then that could be causing your issues.

[Next page](https://forum.djtechtools.com/t/vci-100-traktor-pro-problem-please-help/2833.md?page=2)
