# VCI-100SE Mapping + Traktor Scratch Pro Control Vinyl? **URL:** \ **Category:** DJ TechTools' VCI-100 Product Support\ **Tags:** scratch, vci, vinyl\ **Created:** [September 15, 2010, 7:16pm UTC](https://forum.djtechtools.com/t/vci-100se-mapping-traktor-scratch-pro-control-vinyl/14148 "2010-09-15T19:16:47Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![snakeandbake](https://avatars.discourse-cdn.com/v4/letter/s/67e7ee/32.png) [@snakeandbake](https://forum.djtechtools.com/u/snakeandbake)\ **Post date:** [September 15, 2010, 7:16pm UTC](https://forum.djtechtools.com/t/vci-100se-mapping-traktor-scratch-pro-control-vinyl/14148/1 "2010-09-15T19:16:47Z")
**VCI-100SE Mapping + Traktor Scratch Pro Control Vinyl?** Hi everyone, I’ve been having lots of fun with the VCI-100SE mappings, as well as my Traktor Scratch Pro control vinyls for scratching. However I can’t use both together. I can set up the VCI-100SE mapping easily enough, or the control vinyl using default settings for the VCI-100, but if I try to enable timecode control for scratching while the VCI-100SE mapping is imported, the control vinyl doesn’t have any effect. Additionally, the CUE/CUP buttons which usually change to little record icons when in control vinyl mode remain as CUE/CUP. Has anyone had any luck in getting the VCI-100SE mapping to work with a control vinyl controlling one of your four decks? I basically want to have A/B on the VCI and scratch deck D with a control vinyl. Maybe there’s something I need to do to the mapping to make it work? I apologize if this has been posted before but I searched and honestly couldn’t find it. ---
**Author:** ![sarasin](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.djtechtools.com/sarasin/32/12614_2.png) [@sarasin](https://forum.djtechtools.com/u/sarasin)\ **Post date:** [September 17, 2010, 11:22am UTC](https://forum.djtechtools.com/t/vci-100se-mapping-traktor-scratch-pro-control-vinyl/14148/2 "2010-09-17T11:22:07Z")
You click on the deck letter (C or D in this instance and choose Timecode). You will then see the little records (Absolute and Relative Mode) instead of CUP etc. It works 100%. I have been doing it for a while. Got my upgrade to TSP today …so will be rocking this exact setup over the weekend. Let us know if you are successful! 😉 Oh yeah…you have TSP right…not just TP?!? ---
**Author:** ![snakeandbake](https://avatars.discourse-cdn.com/v4/letter/s/67e7ee/32.png) [@snakeandbake](https://forum.djtechtools.com/u/snakeandbake)\ **Post date:** [September 17, 2010, 2:07pm UTC](https://forum.djtechtools.com/t/vci-100se-mapping-traktor-scratch-pro-control-vinyl/14148/3 "2010-09-17T14:07:34Z")
Yes of course I’m using TSP. I have the control vinyl set up and working, just not when the VCI-100SE mapping is loaded. I can click the A/B/C/D all day long, but it doesn’t change the CUE/CUP buttons if the mapping is loaded. If I reset the mapping to the default VCI-100 mapping that comes with Traktor, then clicking the A/B/C/D will work. I can even see the Scratch Panel after activating it, so I can see the signal coming in and changing when I move the record, it just has no effect on the track and the CUE/CUP remain. I’ve tried it quite a few times, always the same results. I have to reset Traktor’s mapping to the default one if I want to scratch with control vinyl. Can you confirm which version of Ean’s mapping you are using with your control vinyl? I should note I’m doing this on Windows, I’ll try it on my Macbook to confirm the problem on both OSes. ---
**Author:** ![fernandosanchezmunoz](https://avatars.discourse-cdn.com/v4/letter/f/5e9695/32.png) [@fernandosanchezmunoz](https://forum.djtechtools.com/u/fernandosanchezmunoz)\ **Post date:** [April 4, 2011, 11:19pm UTC](https://forum.djtechtools.com/t/vci-100se-mapping-traktor-scratch-pro-control-vinyl/14148/4 "2011-04-04T23:19:21Z")
Hi guys, has any of you found out how to make this work? I was using a recent version of Traktor Scratch Pro on Windows and had everything running smoothly with my VCI-100 and timecoded vinyls. I was given a macbook pro running OSX 1.4 and had to downgrade to Scratch Pro 1.2 as this is the last version supported in OSX Tiger. Unfortunately I am now in the same situation: have the vci100 working smoothly, but even when I can see the timecoded vinyls spinning and reacting, they won’t control the track and the CUE/CUP buttons stay there, no sign of the little record icons that were there in the newer version. Any pointers would be greatly appreciated. Thanks!! F ---
**Author:** ![fernandosanchezmunoz](https://avatars.discourse-cdn.com/v4/letter/f/5e9695/32.png) [@fernandosanchezmunoz](https://forum.djtechtools.com/u/fernandosanchezmunoz)\ **Post date:** [April 13, 2011, 3:29am UTC](https://forum.djtechtools.com/t/vci-100se-mapping-traktor-scratch-pro-control-vinyl/14148/5 "2011-04-13T03:29:07Z")
Ohhhh… I must be mentally challenged, and have lost the manual: there’s a small button under the deck letter that allows to change between cue/cup and the deck modes… hope this helps!!