# VCI-400 tempo fader adjustment in Traktor

**URL:** <https://forum.djtechtools.com/t/vci-400-tempo-fader-adjustment-in-traktor/55203>\
**Category:** Hardware: Controllers, Mods and Gear\
**Created:** [April 2, 2013, 3:54am UTC](https://forum.djtechtools.com/t/vci-400-tempo-fader-adjustment-in-traktor/55203 "2013-04-02T03:54:17Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![protocol](https://avatars.discourse-cdn.com/v4/letter/p/ecae2f/32.png) [@protocol](https://forum.djtechtools.com/u/protocol)\
**Post date:** [April 2, 2013, 3:54am UTC](https://forum.djtechtools.com/t/vci-400-tempo-fader-adjustment-in-traktor/55203/1 "2013-04-02T03:54:17Z")

</div>

**VCI-400 tempo fader adjustment in Traktor**

Hi all,

Is there a more precise way to map the tempo faders of the VCI-400 (not EGE) in Traktor 2.6.1? Even with the tempo range reduced, it’s difficult to adjust during a set because it moves in such large increments in BPM (you have to be reaaally careful). I find myself using the sync button to compensate, which works, but I much prefer using tempo faders, like with a CDJ. Does the VCI-400 EGE have this problem too?

I tried a friend’s Kontrol S4, and the adjustment is very precise and easy to do during a set. Is this because NI uses a proprietary HID protocol with the S4 that isn’t MIDI? Can the VCI-400 somehow use this protocol?

---

<div class="post-metadata">

**Author:** ![makar1](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@makar1](https://forum.djtechtools.com/u/makar1)\
**Post date:** [April 2, 2013, 4:39am UTC](https://forum.djtechtools.com/t/vci-400-tempo-fader-adjustment-in-traktor/55203/2 "2013-04-02T04:39:32Z")

</div>

What tempo range are you using at the moment?

You could map the small square buttons above the faders to change tempo in small increments.

---

<div class="post-metadata">

**Author:** ![protocol](https://avatars.discourse-cdn.com/v4/letter/p/ecae2f/32.png) [@protocol](https://forum.djtechtools.com/u/protocol)\
**Post date:** [April 2, 2013, 5:18am UTC](https://forum.djtechtools.com/t/vci-400-tempo-fader-adjustment-in-traktor/55203/3 "2013-04-02T05:18:23Z")

</div>

> [@makar1](#):
>
> What tempo range are you using at the moment?
> 
> You could map the small square buttons above the faders to change tempo in small increments.

I am using a tempo range of 20%. If a track at 87.50 BPM is loaded, I can adjust from 70 BPM to 105 BPM in that range. The problem is, the smallest increment the tempo fader increases it by is 0.14 BPM.

That’s a great idea - I will try it tomorrow and reply back!

---

<div class="post-metadata">

**Author:** ![makar1](https://avatars.discourse-cdn.com/v4/letter/m/fbc32d/32.png) [@makar1](https://forum.djtechtools.com/u/makar1)\
**Post date:** [April 2, 2013, 5:19am UTC](https://forum.djtechtools.com/t/vci-400-tempo-fader-adjustment-in-traktor/55203/4 "2013-04-02T05:19:55Z")

</div>

20% is a pretty huge range tbh. CDJs are usually on 10% or 6%, and their fader is twice as long as the VCI 400.
