Here’s the most stable and fully working map for the moment.
There were some problems and functionality issues with DJBalla’s map so I started from scratch. The FX section is fine tuned to suit my needs so if someone wants it changed - just say so Loop section works as follows: Pressing “AUTO” sets auto loop, pressing “SET Cue” sets cue and loop in, pressing In/Out sets Loop Out I’ve set up the In/Out LED to indicate when the track is in loop.
Freezes and bugs now occur very rarely ;] If you experience something weird → drop a line here ;]
So here it is! Enjoy!
New version available! See the end of the post 1.0 – > [ATTACH]1934[/ATTACH]
The Sync Button now flashes with the tempo of the track
Minor improvements
Fixed LEDs MIDI Range issue
New Stuff:
Shift + Mic Pitch controls Effect 3
Shift + Left Jog Wheel moves Up and Down through the track list
Automix + Jogwheels - Controls Dry/Wet on effects! Cooler then you might think ;]
Even More New Stuff (Ver. 1.1)
added LED notification when track is in AUTO Loop
AND FINALLY, after 5 hours of misery… the channel level meters It was a real mission to get them working!
Minor changes
Cheers
P.S. Quite a messy post this is… I’ve been posting, reposting and editing it for days
Channel Level Meters DISABLED due to conflicts with ASIO4ALL (maybe just on my Laptop…)
FX Mode almost completely redone: you no longer have to hold AUTOMIX in order to use jogwheels to control DRY/WET Setting. Pressing AUTOMIX once enables FX Mode - jogs act as DRY/WET controls ; MIC FX and MIC PITCH control Effect 1 and Effect 2 ; AUTO and IN/AUT are customized to load specific groups of effects (as seen on one of Ean Golden’s VCI-100 videos) ; jogwheel sensitivity improved. To exit FX Mode press AUTOMIX again.
Super Cue Mode - Press MIC ON/OFF once → store up to 3 cue points (for now) with the “-” button for Deck A and “+” button for Deck B. To play the cue points use PLAY (1), SET (2) and CUP (3). To exit Super Cue mode, press MIC ON/OFF Again
Just bought a Spin off someone, and I must say YOU are awesome. Along with everyone who has been working on mappings! I hope to learn and contribute soon!
Also, anyone notice the Typhoon looked exactly like the Spin?
Thank you Glueeater!
Hope you like your Spin, it’s an awesome little toy!
As far as the Typhoon is concerned… It looks like badly photoshopped Spin. I hope it’s ASIO drivers will be compatible with SPIN ;] (it’s essentially the same piece of hardware I believe)
EDIT:
Version 1.3
In FX Mode Effect 1 Ammount is now controlled by the Tempo Fader, Effect 2 Ammount by MIC FX and Effect 3 Ammount by MIC PITCH. That way you now have full control over the whole FX Section. (almost like VCI-100 Fader FX Mode)
While in FX Mode pressing SYNC would do 2 things. First the FX Panel will change to Advanced and second a special Delay setting will be loaded so that you can seamlessly mix trax with totally different tempos. ( “+” button is mapped as delay freeze button ;] ) (as seen on Ean Golden’s video here ) It was intended to be used with the Oxygen 8, but it should function and feel the same way with the Spin
This is the video where Ean shows what I mean! It’s a nasty little trick indeed! ;]:
dj_gee and TeLLy improved jog wheel mapping. Track now remains stopped until you release the platter. AWESOME Tweak! Thanks for this one guys!
While track is playing the outside of the Jog Wheels act as Tempo Bend / While the track is stopped they become Seek Position control ;] (these two forced me to drink my beer supply for the whole darn week! )
Added Soft Takeovers to Volume Faders, X-Fader, Tempo Faders and EQ Section (did that because I plan on using those for a rather odd purpose later in the TSI development ;] )
When I import the map, I move it to the default settings folder and import it to the controller manager in the preferences but nothing appears after I import it. How do I fix this?
I asked this question and received no answer. When I press the autoloop button, it activates but goes to 32. Is it possible to activate autoloop w/o going to 32 counts automatically?
HEy old fashioned, loving the work you are doing, Im wondering if this map will work with traktor 1.2.4, on a mac or if it will only work with a pc, ??
I am now partially satisfied with how the FX section works!
You have now 1 Chained FX Panel and 1 Advanced Effect Panel per deck.
Pressing “SHIFT” once while in FX Mode disables UNIT 1 (Chained Effects) and enables (UNIT 2) Advanced Effects. You control Dry/Wet with the Jogs, and the 3 parameters with LOW/MID/HIGH (so prm 1 = LOW ; prm 2 = MID ; prm 3 = HIGH). To select the desired effect (in adv FX Mode) you can either use the GAIN fader (sliding it UP or DOWN runs through the effects list) OR for more accurate selection you can use the UP and DOWN buttons of the “nintendo cross” To EXIT Adv. FX Mode press shift once again. This would turn Chained FX On. To exit FX Mode all-together press AUTOMIX.
While in Cue Mode pressing SHIFT + PLAY / SET CUE / CUP deletes cuepoints 1, 2 and 3 respectively
Minor changes
Guess that’s it for now! Enjoy and share feedback!!!
Hey, oldfashioned. Thanks for the new mapping. I just took it for a test drive and can’t seem to figure out how the advanced effects work. The chained effects is superb!!! I think I followed your instructions correctly…while in FX mode, hit the Shift key once and then toggle each of the 3 effects via the EQ. While I did all that, the EQs don’t seem to respond to any of the effects. Any thoughts?
Oh I think I might know why’s that. Try going to Traktor’s Preferences → Effects → under the Effects Unit Routing section set 4 FX Units. So that you now have 2 FX units per Deck Tell me if that helps!
after importing the mappings for the vestax spin everything seems to be working great and i am glad because i have been looking for something like this for a long time now but the only problem i am having is there appears to be no sound coming from the headphones when plugged in, they are plugged directly into the spin.. any help would be great.. thanks..
Loop section works as follows: Pressing “AUTO” sets auto loop, pressing “SET Cue” sets cue and loop in, pressing In/Out sets Loop Out 
