Traktor 2.5 - Remix Deck mapping for Lemur- 64 slot playback - available now

[Forevernow]

Just ran a quick text and loaded the first slot player into my iphone ( 3gs) , which worked successfully without any changes to the scripting ( which is as expected). If your having problems check you lemur version is up to date, and that the screen resolution and layouts are set correctly. see the README in the download, or at the start of this post.

NEEDS TESTING UNDER WINDOWS AS I ONLY HAVE MAC. Im assuming x/y co-ordinates are handled the same way, but this could be wrong. Other seem to have got it working but no platform info was provided.

Allright:

Now the only buttons that have some kind of reaction are the pads and the page buttons (the cursor moves to the correct place for the pads, but is slightly off for the page buttons), but the controls in Traktor don't seem to get pushed, because the interface does n't react.

Any ideas?

Midi is also used in the setup, so needs to be enable in the lemur daemon also and connected with your iphone, only the 4x4 pads use the mouse clicks ( i should change the 1st row to use midi i suppose, later maybe)

How would I get this to work with a ipod touch?

Assuming you can run Lemur, it should work identically to an iphone.. the jzml/jzlib layout will need to change to fit your screen etc


Should have mentioned I'm running lemur 3.1.0, on osx 10.6.8, macbook 13" (@ 1280x800)

joe

[Deksel]

Hey Joe,

I now also have midi connected (in and out, channel 0), but same issue: mouse cursor visibly moves to the correct place in the interface, but doesn't click. I downloaded lemur yesterday, so that shouldn't be the problem. Any onther ideas?

Lemur v3.0.1, iPhone 4s iOS 5.1, Windows 7, TSP 2.5

[Forevernow]

Hey Joe,

I now also have midi connected, but same issue: mouse cursor visibly moves to the correct place in the interface, but doesn't click. I downloaded lemur yesterday, so that shouldn't be the problem. Any onther ideas?

whats your system , MAC Windows ?, have you followed the readme instructions for layouts etc?

Hard for me to help, you could try editing the 2 scripts in the tree for the specific pad/mouse click, and merge the two back into one (& ONLY one), they are currnetly separated to split mouse buton click and the mouse button release. , Try identifying a new x/y screen location to test with. After changign the scripts ( shown below) this should perform a full click, rather than click then release when you touch/release the pad button. Notice the scripts are expressions of X( the button state) rising to 1 and then falling to 0 on press release of the screen, creating two events.

(click)
so mouseout(0,26,443);
clickout(0,0,1);

and

(click2)
mouseout(0,26,443);
clickout(0,0,0);

become
(click_new)
mouseout(0,26,443);
clickout(0,0,1);
clickout(0,0,0);

cheers
joe

[Deksel]

Hi joe,

Yeah sorry, not giving you enough info...
So I'm using your layouts, as my screen is also 1280x800. I am using Windows 7. I had already gone into the scripts and tried exactly the approach you just mentioned.
It seems the clickout command is just not working on my system: also when have another program running, say google chrome, and I let the click happen at the location of a hyperlink nothing happens.
Also, something seems to not work with the clickout on state 1: as soon as I merge the two click actions the x-coördinate of the mouse action is overwritten (the cursor jumps to x=0). If I remove the clickout (0,0,0) this doesn't happen... Weird. It seems like the Lemur KBMOUSE actions don't seem to work correctly in Windows 7. Has anybody else tried to get this working on a windows 7 system?

[onetidd]

wow.. may i ask it work on the x1?!

[Deksel]

Well, so far I've changed the second parameter from the clickout command from 0 (left mouse button) to 1 (right mouse button), and bizarrely, this seems to work. At least, for the mouseclick in. However, I can't seem to release the mouseclick, so I keep on moving the clips.
So for now, it seems that some Lemur commands are different for MAC osx then for Windows (and also different then stated in the reference guide)

[Deksel]

Woohoo!
Solved it.
On my system the second and third clickout parameters are switched: the first one is the target, the second one is the state, the third one is the button, so I've programmed all buttons as following:

Click()
mouseout(0,26,443);
clickout(0,1,0);
Click2()
clickout(0,0,0);

The pads are working and so are the page buttons, on iPhone 4S, Lemur 3.1.0 and Windows 7

[padi_04]

wow.. may i ask it work on the x1?!

The concept should work with any device, since it's emulating mouse movements and clicks. That being said, the layout and script in this thread are lemur specific. You would need a program that emulate a mouse through midi to use it on the X1.

[RainerHaselier]

Here is the first version of a mini template for the remix decks, that works with different resolutions. If I coded it well, it should work with any screen resolution.


As I dropped my iPad and as it is still ion repair, the template has an interface for iPhone so I could test the scriptcode.

To adapt the template for different UI configurations and screen resolution, you need to change a little but in function SetConfigData:

// ************************************************** ***********************************
// Initialize the following vars with your Traktor UI configuration and your screen resolution.
// This info is needed to calculate the point that needs to be clicked in the remix deck to
// trigger the corresponding action.
// ************************************************** ***********************************

// set your screen width in pixels here
initScreenWidth = 1920;

// set to 1 if the Global Section is enabled, set to 0 if is is hidden
initGlobalSection = 0;

// set to 1 if the EQ/Volume Fader panel betwen the decks is enabled, otherwise set to 0
initMixerFaderPanel = 0;

// set to 1 if Key etc panel between the decks is enabled, otherweise set to 0
initMixerKeyEtcPanel = 0;

// set to 1 if the Advanced Panel for Decks A&B is visible, otherwise set to 1
initAdvancedPanelAB = 0;


There are plenty comments in the code, so it should be easy to adapt the template.

Currently there are two constraints:
- Tempo Faders needs to be off
- Timecode Panel needs to be off

Remix-Grid.jpg Remix-ScreenWidth.jpg

The screen resolution can be changed on the fly on the Screen Res interface; there are four buttons for some standard screen widths.

You can control all four decks as remix decks: switch between decks with the dA...dD buttons.

Pressing one of the pads starts the selected sample.

When holding the "SHIFT" button when pressing a pad, the sample is selected, but not started.
I wanted to see how works; this is needed in a real mapping to be able to change GAIN, PITCH, ect for any cell in the grid.

The Lemur template is here:
www.traktorbible.com/lemur/LemurRemixDeck.zip


Would be great if some other guys could play around a bit. I'm curious to hear if it works everywhere.

There is no MIDI mapping in the template. It uses Lemurs mouse out only

Rainer

[Forevernow]

The Lemur template is here:
www.traktorbible.com/lemur/LemurRemixDeck.zip


Would be great if some other guys could play around a bit. I'm curious to hear if it works everywhere.

There is no MIDI mapping in the template. It uses Lemurs mouse out only

Rainer

Hey Rainer.. great work. Download link is broken though. Will have a test tomorrow.

cheers
joe