Problem: Nested Modifier States in Traktor?
Results 1 to 6 of 6
  1. #1

    Default Problem: Nested Modifier States in Traktor?

    Hey Guys,
    I am running into a little bit of an issue here.

    Its better if I explain it as ... this part is basically a toggle button between Modifier and M1 > M0

    Modifier Button A: Sets M1=1
    Modifier Button A: Sets M1=1 Back to M1=0

    I am using Controller: Button, Mode: Direct and values 1, 0

    Problem begins when I try to temporarily put another modifier state M1=2 while I am in M1=1 with Modifier Button B. Here I am using the Hold Mode because I want to get the state back to M1=1 when I let go of the button. But the state gets stuck at M1=2 and does not switch.

    I am using this to switch between FX modes, single to group and back. So the knobs are temporarily switched to Effects selectors for the three slots then back to Dry/Wet for each effect. I plan on using 4 modifiers for the for fx slots and switching modes independently.

    Is there a way around it?

  2. #2
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Set your second button to M1=2, then set value go back to 1 (with invert)

  3. #3

    Default Nothing...

    Does not work... unless I am doing it wrong.

    Mapping here. https://drive.google.com/file/d/0B0V...ew?usp=sharing

  4. #4
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    Fixed it. Let me know if that's what you're after.

    MappingProblem_Edit.zip
    Attached Files Attached Files

  5. #5

    Default This has the same effect as the one I made.

    Hehe... I actually fixed it You forgot an invert send from Button B.

    Thanks man!

  6. #6
    DJTT Mapping Ninja Moderator Stewe's Avatar
    Join Date
    Aug 2010
    Location
    MIDI
    Posts
    7,493

    Default

    You Welcome!

    I know - figured that out after uploading so I made another .tsi file right under the zip

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •