Hardware VA Synths
Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Tech Guru mostapha's Avatar
    Join Date
    May 2010
    Location
    Atlanta
    Posts
    4,748

    Default Hardware VA Synths

    (full disclosure: crossposted from DJF, please don't reply to both threads)

    So…I'm not ready to buy yet. It'll be some time this summer. But, does anyone have any legitimate comparisons of the big (affordable) VA synths that I could maybe start looking for used. Please don't suggest soft synths. I've tried the big ones and mostly can't get good results out of them because I seem to have a mental block against turning knobs with a mouse.

    Big considerations:






    Yes, I'm only talking about one of them. And I know the TI2 is a "better" synth, but it's probably a bit out of my price range.

    Big selling points/needs:

    A good, extensive arpeggiator would be really cool.

    Rhythm-based parameter locks (or something like that) would be cool, but again, I might be able to do that with Maschine.

    Sound I'm looking for:

    General subtractive synth sounds. Variability is the key. I'm considering getting either a Minibrute or Minitaur as well, so the warm monophonic bass sound would be covered. I also know the Radias is basically an updated MS-2000B, but price is sorta-kinda a factor and I do like the sounds I've heard come out of it. Lots of control on the unit itself without too many menus is a need.

    My favorite soft synth so far is Aivd Hybrid, I just hated controlling it with the mouse and never had the right controller for it…you know, if that matters, since I think most people haven't really used it.

    I'll be recording into Logic/PT10 or sampling into Maschine, not that it matters too much, or just playing it with Maschine. And producing something like Deep House at the moment, though I'd like to be able to use it for Chicago/Funky house and Breaks as well. I'll probably be buying a preamp of some kind with it as well (leader ATM is 2 channels of GAP73s, which are Neve 1073 clones) and would like to say I'm going to get compressors as well, but I probably won't afford that in hardware.

    Comments from anyone who's used more than one of them, the sounds you got out of them, experience working with them…that'd be appreciated as well as suggestions for things that I haven't considered yet.

    I don't need a keyboard and am specifically looking for rack/tabletop units. I have my crappy keyboard as well as access to an ePiano that outputs MIDI and has fully weighted, sprung keys that actually feels like a crappy piano instead of a crappy keyboard…if I ever learn how to play Piano. I'll probably have Maschine outputting MIDI and recording the audio into a DAW or sampling sounds off playing it with a KB into Maschine.

    And, again, I'm not interested in soft synths. I'm up to my ears in soft synths that I can't get good sounds out of. And, I have gotten better results playing sampled waveforms in Maschine's sampler (which has a similar routing/control structure to these…amp envelop, filter envelop, a sync'd or free LFO, Overdrive, velocity -> stuff, modwheel -> stuff, etc.).

  2. #2
    Tech Guru diezdiazgiant's Avatar
    Join Date
    Dec 2009
    Posts
    802

    Default

    ms2000 is pretty awesome, as is the radias. i think the radias is the best deal for the money - sounds better then the 2000, has more modulation features, better arp, better filter, better fx, display is more usable, both are multi timbral the 2k has 2 parts with the radias is 4 parts... go for the radias. no complaints with the virus ti except you can buy like 3 radias for one virus. if you really want to skimp on money the 2000 in combo with a sampler/ sequencer like maschine can do a lot of fun shit - the radias can just do a lot more for marginally more.

  3. #3
    Tech Guru mostapha's Avatar
    Join Date
    May 2010
    Location
    Atlanta
    Posts
    4,748

    Default

    Virus Cs tend to go for about the same as the Radias. I know I can't afford a TI or TI2.

    And thanks, that about matches my research thus far. Always nice to hear a real person, though. I'm pretty sure the Radias would win out over the MS2000B unless someone has some horror stories or something.

    Any comparison to the Nord Lead/Rack series in your experience? It's the one I know the least about.

  4. #4
    Tech Wizard
    Join Date
    Nov 2010
    Posts
    57

    Default

    Maybe you need a better control surface than a mouse? iPad + Lemur App + Midi Keyboard?

    I just think it's silly to buy a hardware VA synth when it's just a control thing. Spend a day doing some quality mapping and never think about it again. But, that's just me.

  5. #5
    Tech Guru mostapha's Avatar
    Join Date
    May 2010
    Location
    Atlanta
    Posts
    4,748

    Default

    Quote Originally Posted by thegeek View Post
    Maybe you need a better control surface than a mouse? iPad + Lemur App + Midi Keyboard?
    I own Lemur and TouchOSC and have used them on my iPhone and my friend's iPad2. I deleted them.

    I know this is hard to understand on DJTT, but I like hardware. And I'd rather spend money than map controllers again. My time and happiness are worth more than a few hundred bucks.

  6. #6
    RGAS Guru Xonetacular's Avatar
    Join Date
    Nov 2009
    Location
    South Florida
    Posts
    4,088

    Default

    Quote Originally Posted by thegeek View Post
    Maybe you need a better control surface than a mouse? iPad + Lemur App + Midi Keyboard?

    I just think it's silly to buy a hardware VA synth when it's just a control thing. Spend a day doing some quality mapping and never think about it again. But, that's just me.
    Not the same at all.

    Synths should have knobs so touch is out. And generic midi mapping some controller to a synth is not the same as using a real synth that has been designed decently because people have to use it hands on.

    Also you really can't map most software synths the way you are thinking. There are intricate menus and stuff and most don't have that kind of midi mapping capabilities. The best you will do in a lot of cases is map a few macro knobs, not enough to do sound design purely on a controller.

    If a company made a software synth with a full controller to go with it kind of like maschine I would be all over it, but midi mapping something isn't the same.

    I want some sort of hardware synth too but it's a lot of cash and I have no idea what I would want either.

  7. #7
    Tech Guru Tarekith's Avatar
    Join Date
    Feb 2011
    Location
    Luxembourg
    Posts
    888

    Default

    HArdware synth guy myself, as much as I love the sound of some virtual synths, nothing comes close to dedicated knobs. In terms of an all around general purpose synth my own vote would be for the best Virus desktop you can afford, as those have comparitively more features for the price and sound great.

    The Radias would be my second choice.

  8. #8
    RGAS Guru Xonetacular's Avatar
    Join Date
    Nov 2009
    Location
    South Florida
    Posts
    4,088

    Default

    What are the advantages of a VA synth like a virus desktop over a similarly (or cheaper) priced polyphonic analog desktop synth like a Prophet 08 with 8 voices? I know there is computer software for it that allows synth control similar to the virus as well.
    Last edited by Xonetacular; 02-10-2012 at 11:12 AM.

  9. #9
    Tech Guru Tarekith's Avatar
    Join Date
    Feb 2011
    Location
    Luxembourg
    Posts
    888

    Default

    VA synths usually have a lot more features, and way more voices.

  10. #10
    Tech Wizard
    Join Date
    Sep 2010
    Posts
    22

    Default

    I have had an MS2k and an R3, which has the same sound engine as the radius.

    I quite like the sound of the MS2k. It is nice, dark, and gravely. Great for hard leads and big dirty bass. Not so great for warm pads or soft/layered bass lines.

    The Radius is quite the opposite. It is soft but cold, as if you sanded off the rough bits of the MS2k. Nice for spacey or ariy leads. The Radius has better pads than the MS2k, but still not that great. The Radius has pretty nice built in effects; I use the tape delay a lot.

    The arpeggiator on the Radius has some nice features. You can set a number of arp steps then turn some pf them off, eg you could have a 7 step pattern, but notes only play on steps 1, 4, and 6.

    I think the MS2k would be a good compliment to the Minitaur, and the Radius would be a good compliment to the Minibrute.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •