Any cool VCI 100 MK2 mapping?

[oriyong]

yeb!! done it already

[Stewe]

I'm not sure about the tempo button thought I just got the unit 8 hrs ago lol. How about Shift + Key button cause it seem like i don't need to press key on controller.

Hey Carmen, wazup?

[Stewe]

yeb!! done it already

Cool! Let me finish my coffe and we may continue.

[Stewe]

In next step you will map FX on commands. All of those commands need to be assigned to jog touch.

FX unit 1:

Effect 1 on: M8=1
Effect 1 on: M8=2
Effect 1 on: M8=3
Effect 1 on: M8=4

Effect 2 on: M8=1
Effect 2 on: M8=2
Effect 2 on: M8=3
Effect 2 on: M8=4

Effect 3 on: M8=1
Effect 3 on: M8=2
Effect 3 on: M8=3
Effect 3 on: M8=4

[Stewe]

For interaction mode set hold.

[oriyong]

done! with both decks!

[Stewe]

Next are preset parameters for dry/wet and all three effect amounts. All commands set to button (direct) and map it to jog touch too.

Fx unit 1:

Dry wet: M8=1 (set value 0.600)
Dry wet: M8=2 (set value 0.700)
Dry wet: M8=3 (set value 0.600)
Dry wet: M8=4 (set value 0.000)

Effect 1 amount: M8=1 (set value 0.600)
Effect 1 amount: M8=2 (set value 0.500)
Effect 1 amount: M8=3 (set value 0.500)
Effect 1 amount: M8=4 (set value 0.000)

Effect 2 amount: M8=1 (set value 0.100)
Effect 2 amount: M8=2 (set value 0.100)
Effect 2 amount: M8=3 (set value 0.400)
Effect 2 amount: M8=4 (set value 0.000)

Effect 3 amount: M8=1 (set value 0.200)
Effect 3 amount: M8=2 (set value 0.200)
Effect 3 amount: M8=3 (set value 0.000)
Effect 3 amount: M8=4 (set value 0.000)

[oriyong]

done with both decks

[Stewe]

Great! This is gonna be final step and from now on its all about perfecting. All commands need to be set as encoder (relative) enc. mode 3Fh/41h and mapped to jog platter scratch.

FX unit 1:

Dry/wet: M8=1 (sensitivity 70% ; acceleration 55%)
Dry/wet: M8=2 (sensitivity 90% ; acceleration 55%)
Dry/wet: M8=3 (sensitivity 70% ; acceleration 55%)
Dry/wet: M8=4 (sensitivity 60% ; acceleration 0%)

Effect 1 amount M8=1 (sensitivity 68% ; acceleration 25%)
Effect 1 amount M8=2 (sensitivity 68% ; acceleration 25%)
Effect 1 amount M8=3 (sensitivity 68% ; acceleration 25%)
Effect 1 amount M8=4 (sensitivity 60% ; acceleration 0%)

Effect 2 amount M8=1 (sensitivity 88% ; acceleration 37%)
Effect 2 amount M8=2 (sensitivity 88% ; acceleration 37%)
Effect 2 amount M8=3 (sensitivity 60% ; acceleration 37%)
Effect 2 amount M8=4 (sensitivity 60% ; acceleration 0%)

Effect 3 amount M8=1 (sensitivity 48% ; acceleration 35%)
Effect 3 amount M8=2 (sensitivity 50% ; acceleration 35%)
Effect 3 amount M8=3 (sensitivity 50% ; acceleration 35%)
Effect 3 amount M8=4 (sensitivity 60% ; acceleration 0%)

When it comes to drama FX I think that sensitivity of 60% should be fine but you can reduce it if you find it very fast.

[oriyong]

I have done setting the effect amount to be (hopefully) perfect by watching and listening a lot in youtube.
and i think we done with the jog FX thanks to you man!.

I would like to add more map to make it more flexible controller like
- I mapped the bottom 4 buttons for Play, hot cue1, hot cue2, hot cue3 but i cant mapp it to be shift+hot cue to delete hot cue. I will try to map blink led on play button tonight though lol.
- how can i map headphone cue to auto activate when I load other deck? please advice.
- the volume fader is always up when i open the traktor even they are down in the controller. Is it anyway to correct this error?
- what should we do with effect bank 3 and 4? I got and idea of effect bank 3 is to be a manual group effect control by 4 knobs in the controller. For the effect bank 4, echo mod?
- any idea to tweak the joy stick knob in brower the song? It cann't move to the left tree in traktor

- Lastly, what should we name this mapping? lol

I have attached you the current tsi. for checking though. vci100mk2.tsi
Thanks again man. You just made my dream come thru.