Audio 10 - Xone 2D

[WastedYouth]

Here I am again, almost figured everything out.

I need something like the audio 10 to hook up my DDM4000 to traktor, but I don't want to spend 500$ on some damn soundcard.
I looked on the interwebs and found that the Xone 2D is also a 8channel soundcard.

If I mix these two together, the DDM4000 hooked up to a Xone 2D, the Xone to traktor, would that do the same as an audio 10?

Thanks in advance, you guys have already been a huge help for this noobie.

WY

[MyUsername]

Xone 2D is NOT scratch certified.
So no timecode with that.

[seitz]

why would a digital mixer not have usb x.x



get something like http://www.amazon.com/M-Audio-Midisp...1759883&sr=1-2 and just hook it up to your laptop?


edit: you still need a soundcard....u could always get an audio 2 and run usb from your computer into the audio 2 into channels a/b on your mixer and use the above midi to usb to allow you to control traktor

[MrPopinjay]

2 x NI Audio 2
Then aggregate them into one soundcard using ASIO4ALL drivers on Windows or just core audio on a Mac. Viola- 4 stereo outputs!

Other options include a second hand Audio 8 DJ (warning, may not work with USB 3.0) and the ESI Gigaport.

There's really not enough options for those wanting 4 stereo outputs, it sucks hard

[WastedYouth]

Xone 2D is NOT scratch certified.
So no timecode with that.

I don't really mind timecode, I just want a soundcard that works with traktor

[djmoonie]

xone 2d and DDM4000 will work just fine, I've used that setup before.

You can mix externally on all 4 channels.

You can also use either a usb to midi cable to use the midi functions of the DDM4000 or use a straight 5 pin midi cable routed through the 2d's midi in/out, so you only need to use up one usb port.

[WastedYouth]

xone 2d and DDM4000 will work just fine, I've used that setup before.

You can mix externally on all 4 channels.

You can also use either a usb to midi cable to use the midi functions of the DDM4000 or use a straight 5 pin midi cable routed through the 2d's midi in/out, so you only need to use up one usb port.

In that case the DDM4000 is just a midi controller and I can only prelisten with the Xone 2D?

[Cook]

In that case the DDM4000 is just a midi controller and I can only prelisten with the Xone 2D?

run the RCAs from the 2D into your ddm4k, then you have 'pre-listen'

If your wanting to use the midi on your ddm as well as the 2D, run a midi cable out the ddm into the 2d, then connect the 2D to your laptop via usb.

[Cook]

2 x NI Audio 2
Then aggregate them into one soundcard using ASIO4ALL drivers on Windows or just core audio on a Mac. Viola- 4 stereo outputs!

i never ever thought of that, going by the price of used kit, doing this way costs half of that of a audio 8DJ.

[WastedYouth]

run the RCAs from the 2D into your ddm4k, then you have 'pre-listen'

If your wanting to use the midi on your ddm as well as the 2D, run a midi cable out the ddm into the 2d, then connect the 2D to your laptop via usb.

Big big thanks man.