-
-
-
Tech Wizard
From what I can see from your screenshots, you seem to be using the soundcard of the Rmx, so I'll assume that your speakers are connected to the Output 1/2 on the back of the Rmx ?
If so, then should have a configuration that looks like this :
Attachment 2246
Your main mix will come out of your speakers and monitoring out of the headphone.
As for the microphone, do you want to use it only for talk-over or for recording ?
For the Talk-Over: pushing the Mic On/Off button, will send the MIC signal directly to the main output. That's it.
If you want to use the microphone for recording:
- you first need to select the microphone as source for input 1/2 in the Rmx control panel
Attachment 2247
- Then in Traktor Input configuration, select input 1/2
Attachment 2248
Your microphone signal should normally be available for recording.
If you've mapped the Source 1 button to "Input Select", then you can toggle between external source (the microphone) and internal (mp3).
Aslo keep in mind that when using the microphone as external source, you cannot use the Input 1/2 on the back of the console at the same time.
-
Ok thanks but I wasnt connected to my speakers through the rmx.
I have brought the wire and now my speakers are connected to outbound 1 and 2 on the rmx
I can get deck A to play through the speakers and Deck B to play through the headphones,
How do I set it up?
Sorry for being a pain
Thanks
-
Tech Wizard
You setup as in the pictures attached.
-
I have but it didnt work ><
-
Tech Wizard
What exactly didn't work ?
-
Ah update, I installed virtual DJ and it works perfectly. Something to do with traktor
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks