Vci-300 tsi
Page 1 of 8 12345 ... LastLast
Results 1 to 10 of 78

Thread: Vci-300 tsi

  1. #1
    Tech Guru
    Join Date
    Jan 2010
    Posts
    2,019

    Default Vci-300 tsi

    Seen a few post lately for VCI-300 mappings. Here's one I've been messing around with. This is Soulst mapping that I've added Zac's jogwheel mapping and they work awesome. You need to make sure you press the scratch button and turn on scratch. Also, added all LEDs working (except for volume meters). Big change is Out Loop 1 turns on Delay for the desired deck and Outloop 2 triggers the freeze. What I have not fixed is that the lights turn on on both sides. SO whatever side you turn it on from, make sure you turn it off.

    Mostly everything is set up similar to Itch and whats on the controller.

    Trim = Filter. Press the button below it to turn on the filter
    Trim + Shift = Gain

    Shift + Keylocks = quantize and snap
    The small pitch shift buttons assign effect 1&2

    For searching for tracks you can press back to go down the tree and
    pressing the center button plus the fwd button opens a folder.

    Shift + crates = changes the left side EQ and Cue buttons to control
    effects bank 1 for chained effects
    Shift + browes = changes right side EQ and Cue buttons to control
    effects bank 2 for advanced effects.

    Use the cue and loop out buttons to turn on the effects and scroll for effects. Also while in this mode Shift + EQ buttons controls the actual EQ's.

    Im sure I'm missing a few things, but mess around with it and you'll
    figure most of it out. It still needs some polishing up to be good.
    I think it needs another controller like an X1 (which is what I use
    with it) to really get the most out of Traktor. But for a simple 2
    deck easy mixing with good jogs and minimal use of effects this works
    pretty damn well.

    I plan on making out loop 3 a slice button or beatmasher, and I might just leave scratch on at all times since I don't ever pitch bend in traktor and use that button to trigger decks 3 and 4. Enjoy!

    Again this was Soulst mapping so I give him full credit.
    SSL - DJM 800 - Technic 1200's - X1 - ITCH - NS6 - VCI-300

  2. #2
    Tech Guru
    Join Date
    Apr 2008
    Location
    Brooklyn We Go Hard!
    Posts
    832

    Default

    Thanks homie, you're the man!

    Did you every get the jogs to pitch bend?....I tried on the one you gave me but was clueless when it came to the modifiers...The scratch function seems awesome.

    Thanks again!!!
    :: Kontrol Z2 :: :: Technics 1200 :: :: Pioneer DJM 250 :: Kontrol X1 MkII :: :: Maschine :: :: Kontrol S4 ::

  3. #3
    Tech Guru
    Join Date
    Jan 2010
    Posts
    2,019

    Default

    Oh shit...whats up big pimp. No man, I really haven't touched this much more. I'm relying on the sync button with Traktor and will pitch bend when using Itch

    If you really need it, I don't think it'll be hard to add.

    Also, I think the keyboard mapping with the .TSI is one Armyofme had up one time that each row of vertical keys are cue points for the decks. So decks 3 is A thru H and deck 4 is Z thru N.

    So if you wanna drop samples off decks 3 and 4 you can do it off your keyboard.
    SSL - DJM 800 - Technic 1200's - X1 - ITCH - NS6 - VCI-300

  4. #4
    Tech Guru
    Join Date
    Apr 2008
    Location
    Brooklyn We Go Hard!
    Posts
    832

    Default

    Quote Originally Posted by haze324 View Post
    Also, I think the keyboard mapping with the .TSI is one Armyofme had up one time that each row of vertical keys are cue points for the decks. So decks 3 is A thru H and deck 4 is Z thru N.

    So if you wanna drop samples off decks 3 and 4 you can do it off your keyboard.
    Nice one!
    :: Kontrol Z2 :: :: Technics 1200 :: :: Pioneer DJM 250 :: Kontrol X1 MkII :: :: Maschine :: :: Kontrol S4 ::

  5. #5
    Tech Wizard
    Join Date
    Jun 2010
    Location
    Buffalo, NY
    Posts
    33

    Default

    Haze - my email is sundayradio@gmail.com when you get a chance

    The one i tried to load into Traktor Pro is 300v7.tsi - 750 KB, not sure why it loaded blank for all MIDI

  6. #6
    Tech Guru
    Join Date
    Jan 2010
    Posts
    2,019

    Default

    Reloaded with keyboard mapping and controller named VCI-300, had it as generic before. Also saved ports to the 300.


    Zong, I juse downloaded what I posted and it was fine. Are you using a PC? Perhaps the file conversion from a mac jacked it up? I'll email it now.
    SSL - DJM 800 - Technic 1200's - X1 - ITCH - NS6 - VCI-300

  7. #7
    Tech Wizard
    Join Date
    Jun 2010
    Location
    Buffalo, NY
    Posts
    33

    Default

    Yeah, I am using a PC. I bet that is the reason.

    I'm loading it, and then selecting VCI-300 in the device. The assignment table is blank.

    Oh well, maybe some other PC users can confirm.

  8. #8
    Tech Guru
    Join Date
    Jan 2010
    Posts
    2,019

    Default

    Quote Originally Posted by zong View Post
    Yeah, I am using a PC. I bet that is the reason.

    I'm loading it, and then selecting VCI-300 in the device. The assignment table is blank.

    Oh well, maybe some other PC users can confirm.
    one last try. If anyone knows how to change this for PC users? I'm exporting .tsi to my desktop and then uploading. Just tried to rename the file and readded the .tsi file extension
    SSL - DJM 800 - Technic 1200's - X1 - ITCH - NS6 - VCI-300

  9. #9
    Tech Convert
    Join Date
    Nov 2008
    Location
    OleMiss off Campus
    Posts
    10

    Default Works on Mac leopard 10.6.4 Traktor 1.2.4

    Uh.... Just tried it on my MBP 2008' and it works fine. Just the level meters are not working.

    Turns off my Kontrol x1 though.

  10. #10
    Tech Guru
    Join Date
    Jan 2010
    Posts
    2,019

    Default

    ^ Cool. Glad it worked!!

    Yeah I haven't mapped the level meters - figure I can keep an eye on the screen for those until I end up mapping them.

    Not sure why it turns off your X1?
    SSL - DJM 800 - Technic 1200's - X1 - ITCH - NS6 - VCI-300

Page 1 of 8 12345 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •