Use s4 on midi mode

[onetidd]

Hey i'm very interested for the midi mode, but i would like to know how to use it with an other software like soundboard plz???
Help me i had tried with the controller editor but it don't want to work on it.

[Dystopic]

You have to switch to midi mode first. On your S4, hit "shift" + "browse" buttons. This will change the device to Midi Mode, and you should then be able to map the controls to any program that can work with midi controllers.

The controller editor will give you the channel assignments and such.

[onetidd]

That's what i already did, but it don't work... plz help^^

[Dystopic]

Either you're not doing it correctly, didn't install your drivers correctly or you have a defective unit (which I doubt).

When you switch modes, the LEDs should change dramatically. I know this works because I've already mapped the S4 to Virtual DJ using midi mode.

[onetidd]

yes my leds changed but the soundboard software don't reconize the s4 midi key...

[photojojo]

Are you trying to map certain things in Soundboard to the controller? If you turn midi on while the S4 software is running does the ctrl light come on when you press a button or move something?

[photojojo]

Also check the controller editor in the native instruments application folder. You can switch what messages the controller sends out in there.

[onetidd]

doyou mean when i'm on midi mode.....?

[photojojo]

Yes, when you switch the S4 to midi mode and press something on the controller does the ctrl light come on in the software. It's at the top near the center.

[onetidd]

no it don't light on....