Numark Mixmeister Control and X1 on Traktor Pro 2

[gaidjin]

It's 4 deck and 2 fx unit, 2 of FX GROUP units knobs are on Traktor Kontrol X1 and 2 of FX SINGLE units knobs are on Mixmeister Control (you still can select FX GROUP and FX SINGLE with mixmeister knobs).

FX unit 1 and 2 are FX GROUP, 3 and 4 are FX SINGLE.

I'm using Fx unit 1 and 3 on deck A and C, Fx unit 2 and 4 on deck B and D.

MOD1 btn hold +
* press SAMPLE DECK 1,2,3,4 to load track from list in to selected sample slot. (DECK3, slots 1-4, DECK4, slots 1-4)
* press MULTI Btn1 "-" , "+" Check out below Shiftee's : Turntablism Technology " Plooping" and you will know what this do
http://www.youtube.com/watch?v=Iy96Al2iEcQ


MOD2 btn hold +
* press SAMPLE DECK 1,2,3,4 switch slot play mode to LOOPED
* press MULTI Btn1 "-" decrase loop recorder slot size, "+" incrase loop recorder slot size
* twist MASTER VOLUME KNOB to change LOOP RECORDER dry/wet

MOD3 hold (1,2,3,4) +
* press SAMPLE DECK 1,2,3,4 switch slot play mode to ONE-SHOT
* press MULTI Btn1 "-" /2 decrase sample slot size, "+" incrase x2 sample slot size
* press MOD5 Btn sets deck focus (1-A, 2-B, 3-C, 4-D)
* press PLAY (if something is recorded) load recorded loop in slot 1, 2, 3, 4

MOD4 switch (0/1) - Jog wheel - (0) led off Seek position, (1) led on scratch + tempo bend (you can switch this with MOD4 btn) and is set to device target and have modifier.

MOD5 switch (0/1) - (0) led off (3x knobs are for FX1 unit), (1) led on (3x knobs are for FX2 unit)

DELETE - delete recorded loop
REC - record loop
PLAY/stop - play/stop recorded loop (+MOD3 option)


More description and updates soon.

Rest is on PICTURE

TSI is here
http://traktorbible.com/freaks/mappingview.aspx?id=191

PS
sorry for my english

[chrisbag]

hello guys and gaidjin

I have been studying your guide to the numark mixmeister for a few weeks and very chuffed with what you are doing.

My question is this before I purchase one to work with traktor pro.

Is it any good and the main question is this. How would I control the channels whilst mixing from channel 1 to channel 2 etc ? is it the large knobs beside the 3EQ's that control the channels?

If you could explain that I would be happy and able to proceed with my purchase.

Cheers
Chris