Denon SC2000 or Reloop Contour?

[acronym]

If you had to pick one, which?

[SlayForMoney]

well reloop doesn't have pitchfader, that's the main breaking point

[zestoi]

neither right now - i'd wait a bit to see what the behringer PL-1 is like first

[acronym]

The issue I have with behringer is build quality to be honest, I probably wait and see how well its integrated with Traktor.

[acronym]

Plus when is the Behringer coming out again?.

[MeowMix]

neither right now - i'd wait a bit to see what the behringer PL-1 is like first

^this. Im waiting for them too.

its supposed to come out in june. Knowing who is in charge of the project i think quality will be just fine.

[Emmett]

Depends what you want it for.

I use two SC2000s due to the 14 bit resolution 100mm pitch fader. It works very well for manual beatmatching with the 'filter' encoder set to fine pitch adjust (.01%)

- Using effects with endless encoders is not the best way of doing things. All 6 pots on the 2000 are endless encoders.

- The led feedback is good

- The jog wheels work perfectly fine for non-scratching applications i.e (bending and scrubbing)

- It has Denon build quality. The build finish of this is on par with my Xone 62.

I haven't used the Reloop, but it looks very cramped with some unusually small buttons. The faders look useless due to their length.

[SlayForMoney]

I use two SC2000s due to the 14 bit resolution 100mm pitch fader. It works very well for manual beatmatching with the 'filter' encoder set to fine pitch adjust (.01%)

- Using effects with endless encoders is not the best way of doing things. All 6 pots on the 2000 are endless encoders.

- The led feedback is good

- The jog wheels work perfectly fine for non-scratching applications i.e (bending and scrubbing)

- It has Denon build quality. The build finish of this is on par with my Xone 62.

I haven't used the Reloop, but it looks very cramped with some unusually small buttons. The faders look useless due to their length.

word. behringer PL-1 will probably be ok, but i'd wait for it only if $$$ is the issue...