USB Cable

[HalfofForever]

Hey so I finally figured out what I'm going to get for a first serious setup (original VCI 400 + Midi Fighter 3D) and had a quick question about USB cables.

I suppose first of all, does the MF3D come with a USB cable? I didn't see anything about it on the page, but I like to make sure.

Midi Fighter 3D-
http://store.djtechtools.com/midi-fighter-3d.html

My second, main question is how would "Mediabridge High-Speed 2.0" USB cable compare to the DJTT USB cables they sell on this site? Or can anyone recommend a USB cable that rivals the DJTT Cable?

MediaBridge USB Cable-
http://www.amazon.com/Mediabridge-Hi...ediabridge+usb

DJTT Cable-
http://store.djtechtools.com/dj-tech...usb-cable.html

Thanks!

[MYE]

all usb cables are the same and im 90% sure the midi fighter comes with a usb cable

[padi_04]

Skip to 2:20

[HalfofForever]

Thank you!

[ekwipt]

Has anyone found some really short (30cm or so) right angled high quality USB cables or could DJtechtools get some made up, I'm looking for three for a new setup I've been working on?

[HalfofForever]

Not right angle, but this is the best I could find. Could you specify what kind of USB you need? This is A to B, and it's about 12 inches (30.48 cm).

http://www.amazon.com/Type-Male-Cabl...=1ft+usb+cable

Good luck!

[ekwipt]

Thanks mate, it's for 3 NI controllers, 2x X1 and a F1 plugging into a USB hub?

I'll probably just stick to my cables that came with the controllers if I can't find great quality ones

[Jester]

The standard native instrument ones are ok, not super flash but they do have one ferrite. I use the original DJTT cables for my X1's, a new DJTT (the blue type) for my soundcard and the included right angle cable for the MF3D.

[ekwipt]

Can DJ Tech tools do different cable lengths?

[djmoonie]

I'm pretty sure they don't have a manufacturing facility just yet

Components are shipped in pre made would be my guess.

The USB cables will be the same. They will probably then clip ferrites on and a nice shiney sticker.