CMD MM1 VU Meter / Traktor Issue

[dclan]

Hey there, thanks to me scouring the forums and whatnot I figured out how to map the VU meters on the CMD MM1 to the master-out meters of Traktor. But what I am noticing is that they aren't accurate.

If I have the main out at lets say half-way on the traktor master VU meter, on the CMDMM1 it will show as clipping.

If I turn the master volume up on tractor to the point that the tractor meter is clipping, the VU meters on the CMD stop responding.

I saw on a youtube video of Stewe's mapping that it seems to have this problem fixed, but I don't want to use his mapping as it is super complicated and I am just trying to rig a basic mapping right now.

Any help with this would be appreciated.

I have a feeling this has something to do with the "controller range" fields or the "Midi range" fields. I messed around with them a bit but I cannot seem to make the vu meters true to the tractor master out meter.

Thanks again!

[Raem]

Up, got exactly the same problem ^^

[ablahblah]

Try setting MIDI Range on the MM-1 VU Meter from 48 to 63?

[Stewe]

Right Meter = CC 80
Left Meter = CC 81

Note that you need to assign those manually by selecting values with your mouse.

[Raem]

Yep, the MIDI Range was the problem, setting it from 48 to 63 fixed it. thanks !

[the_bastet]

make sure you do not go above 66 on the right range.

I have mind set to 0-60. Also all led outputs are 0 to 1

[Stewe]

Yup, just checked it. I also use range of 48-63 in my mappings which was replicated from Behringer's TSI.