QS - Twitch mixer only mapping

[ManuManiac]

Hi there,
after so much hours of testing some mappings, for use with multiple hardware (Behringer PL-1, Twitch and a Launchpad S), but the most mappings won't work with other mappings.
So i decided to make a simple "Mixer only" mapping for the Twitch.

On the Pl-1 i use Stewe's PL-1 performance mapping, for the Launchpad S i use CTC RemixPad v1.0.

Now i got the problem to map the Filter button and encoder to work together. The Filter button is also mapped to control the gain.

If i push the filter on button on the twitch i wanna control the filter, if the button was of i wanna control the gain.
Atm i got only to control both at the same time with a modifier.

Pls help if u have any ideas.

[Stewe]

Hello Manu,

I'm not familiar with Twitch hardware but would like to help you on this. The part I'm not so sure about is your Filter/Gain knob - you sure that this is actual rotary encoder? And not just a simple rotary knob such as your EQ knobs?

Now i got the problem to map the Filter button and encoder to work together.

PS. Thanks for choosing my PL-1 mapping btw, how's that one doing the job for you? -haven't got much feedback so far...

Cheers,

[ManuManiac]

Hey Stewe, yes you're right, it's a rotary knob. The problem i have is to use the modifier as a function change button.
My mapping still @ the beginning and it's not complete atm.

Twitch Mixer Mode.tsi

I like your mapping a lot, it works great.

[Stewe]

OK - so I've look into your mapping and it appears that modifier commands are missing. Here's the example of the exact settings that you should apply:

Filter On button:
Modifier 1 / condition M1=0 / type=button / mode=direct / value=1
Modifier 1 / condition M1=1 / type=button / mode=direct / value=0
Filter On / condition M1=0 / type=button / mode=direct / value=1
Filter On / condition M1=1 / type=button / mode=direct / value=0

Gain/Filter Adjust knob:
Gain Adjust / condition M1=0 / type=fader / mode=direct
Filter Adjust / condition M1=1 / type=fader / mode=direct

Twitch_Gain_Filter_Knob.zip

[ManuManiac]

Yay that works nice.

Now i got a problem with the Load buttons, i have seen on your mapping there will no load button, to load a track into a deck.

So i use the Twitch for that, that works but the OUT won't.
If i don't have i track in the deck i want the led off, if a track is loaded into a deck i want the led on.

Did u have an idea?

Twitch Mixer Mode.tsi

[Stewe]

Nice

You are correct, my PL-1 mapping is designed to go with a midi mixer such as CMD MM-1 which has this track browsing and loading options.

Far as displaying loaded deck goes this is the command you're after:

Add Out > Deck Common > Deck Is Loaded

If you find anything that bugs you, feel free to respond with other questions. I'm here to help

[ManuManiac]

Yes i got is, but the led won't light up if a track is loaded.

I'm not sure if i'm right. If the deck is empty the led should be off, if a track is loaded in the deck the led should be on, right?

[Stewe]

Hmmm... can I see a screen shot of your LED options?

Your controller range should be set:
min=0
max=1

And your MIDI range:
min=0
max=127 (if that's a multicolor button than try out different values)

[ManuManiac]

Of cause u can get a sc for the options

ishot-22.jpg

[Stewe]

Thanks! I can see the 'Blend' is checked... Did you try testing without this option?