Remix Decks Mapping?

[Fr3d]

HI,
I 'm just trying to map the Remix Decks on my push . How can I following functions map:

1. if the cell is empty, the light should be off " 0 "
2. if the cell is loaded with a sample the led should be red
3. when the cell is played , it flashes red
4. Is it possible to have an effect(freez) on every single remixdeck slot?

Thank you very much in advance .

[Fr3d]

Can no one help me with that?

[Chael]

im not sure how it works on the push but on the APC40 its the numbers in controller range if i remember right which dictate what colour the pads are and if its a solid or blinking state, as for the cell empty/cell loaded i think you will need to set modifiers - a google search and some vids on youtube will explain it better than i ever could

[Stewe]

Did you search the Forum? This topic has been answered many times before...

You need to work with the "Cell State" modifiers. Once you have assign it to a command you will be able to select the value (loaded, playing, empty etc)

As for the LED colors, you can select any color from PUSH's palette by tweaking the MIDI Range min and max value:

min = button OFF state
max = button ON state

[Fr3d]

Did you search the Forum? This topic has been answered many times before...

You need to work with the "Cell State" modifiers. Once you have assign it to a command you will be able to select the value (loaded, playing, empty etc)

As for the LED colors, you can select any color from PUSH's palette by tweaking the MIDI Range min and max value:

min = button OFF state
max = button ON state

I looked trough the forum, but I couldnt find any command for flashing led or how to asign an effect to a single slot.

[Stewe]

Add out > Deck Common > Beat Phase (blinking LED)

Add In > Deck Common > Submix > Slot FX On (Traktor Pro 2.9 and newer)
Add In > Remix Deck > Slot FX ON (Older versions than Traktor Pro 2.9)

[Fr3d]

Add out > Deck Common > Beat Phase (blinking LED)

Add In > Deck Common > Submix > Slot FX On (Traktor Pro 2.9 and newer)
Add In > Remix Deck > Slot FX ON (Older versions than Traktor Pro 2.9)

Thanks man, I tried the Beat Phase, but nothing blinks.
What settings do I have to change at Beat Phase Add Out?

And how do I chose an effekt for that slot?

[Stewe]

Here's some secret grabs for you.

1) Check the LED options and set this values:



2) Use deck assignment and then set the slot target:

[Fr3d]

Here's some secret grabs for you.

1) Check the LED options and set this values:



2) Use deck assignment and then set the slot target:

2) An where can I chose what effect is selected, e.g. frees, beatmasher and so on?

...sorry for so many questions.

[Stewe]

2) An where can I chose what effect is selected, e.g. frees, beatmasher and so on?

...sorry for so many questions.

Add In > FX Unit > Effect X Selector
Type = Button
Interaction = Direct
Value = Effect of choice

Here's the screen for you: