Connecting YamahaDXR15 and Cerwin Vega Sub P1800SX to Pioneer DDJSX2
Good Evening …
Here is my simple setup:
Two Yamaha DXR15s: DXR mkII Series - Powered Loudspeakers - Yamaha
Cerwin Vega P1800Sx: www.cerwinvega.com
Pioneer DDJSX-2: www.pioneerelectronics.com
I am wondering if my current connection is the most optimal way to go. Here is usual setup:"
- I connect the main out from the controller to the inputs on the sub.
- Use the “thru” outputs from the subs to the speakers.
The crossover setting on both the tops and the subs will allow me to separate the high and low frequencies:
– The sub has a built on crossover set at 80Hz. Engaging it will send all frequencies above 80Hz to the tops and those below (80Hz) to the sub.
– The tops have HPF (high pass filters) selectable at either OFF, 100Hz or 120Hz. I will turn it off since the sub has presumably separated the low/high frequencies. Am I correct in this assumption or should I go ahead and engage the 100Hz crossover for the tops ?
A figure showing the connections is available here: https://postimg.org/image/im0sasnkh/
Also, is there an alternative way of setting up my connections.
Thanks for the inputs -
cheers - Oy