Help Important - My Vci100 SE - switches off 10-15 times a night to 7 hours.
Help important!
My vci 100 se with firmware 1.3, switches off from 10-15 times a night to 7 hours.
When I turn on and off the works again to go out. All light LEDs are still light, even when it switches off. The sound is not affected by it.
User Macbook (white) and tractor pro version 1.2, has loaded the latest tsi file from dj tech tools
Have tried to change cable, but the problem is still there
hope you could help … Because it is important for me to trust my vci.
one thread would’ve been sufficient..
did you upgrade yourself? if so, maybe you didn’t connect everything right..
do you have a second computer (or mac) to test if it’s really the vci?
VCI 100 SE purchased at djtechtools and I thought everything would have been properly connected
Do you get an USB hub over power message ?
I use USB for the Mac, do not use 9-volt AC power adapter.
will my problem disappears when using a 9-volt adapter???
I have no fault on the screen.
Are there others who can help??
I would try using a power adaptor and see if that works first.
Next I would open the case and check that the piece of cardboard which sits accross the bottom of the circuit board by the USB connector is no missing.
If you have the ability- you should try out the controller with another computer. THis will isolate the problem and determin if its a local thing or if the controller itself has problems.
You might then try different USB ports as it sounds like a power problem. I had this problem once while spinning on a float with dirty power from a generator.