krk rp6 g2 monitors...

damn this is pissing me off! the crackling and popping was caused by the s4 cuz i have that out of the picture and the cracking and popping goes away…

but know i have TRS cables are acting up…

for the sound to be perfect i have to plug in the TRS like almost half way in which tells me i have to wrong cables…im so confused and angry haha wtf

Are you sure you’ve got TRS and not TS? TRS have 2 lines on the plug, TS only has one.

im pretty sure i bought TRS here is what i bought…

[ame=“Amazon.com”]Amazon.com: Hosa CSS110 1/4 TRS Interconnect Cable 10 Ft: Musical Instruments@@AMEPARAM@@http://ecx.images-amazon.com/images/I/31JM44qkIZL.@@AMEPARAM@@31JM44qkIZL[/ame]

Well I skimmed this thread but you do need both “sections” of that cable to be plugged in for grounding purposes. Maybe a different adapter that can just take the whole end?

you need speaker cables, i use Hosa 1/4trs to xlr i am sure the rp6’s have and xlr connection on the back

http://www.sweetwater.com/store/detail/STX115M/

You think that will do it? Ill order some as soon as I can! Thanks for the input

Btw yes the rp6s have an xlr connection in the back

The cables can be pushed in all the way its just that the sound is awful and you can’t hear the vocals in the song and it sounds “canny” but for it to sound perfect that’s how I have to plug those cables in (reference the picture)…

Yeah, those are TRS.

What are the sockets you are plugging into in the first pic? Is that some kind of adaptor? Are you sure they are balanced TRS sockets?

this is what they are plugged into in the first picture…

[ame=“Amazon.com”]Amazon.com: Hosa YPP118 1/4 TRS To Dual 1/4 TRS Female Y Cable: Musical Instruments@@AMEPARAM@@http://ecx.images-amazon.com/images/I/31JCX1NpHEL.@@AMEPARAM@@31JCX1NpHEL[/ame]

and then i have them running into this…

[ame=“Amazon.com”]Amazon.com: Behringer XENYX502 5-Channel Mixer: Musical Instruments@@AMEPARAM@@http://ecx.images-amazon.com/images/I/51lcthq3ylL.@@AMEPARAM@@51lcthq3ylL[/ame]

im pretty sure they are balanced TRS sockets lol i dont understand why this isnt working

What’s the Y-Cable for? That Behringer has separate R and L outputs on both the main and monitor outs - try plugging straight from the mixer to your speakers.

edit: just checked the spec sheet again, those outputs are unbalanced. This shouldn’t matter, and I’d definitely try plugging straight from the mixer to your speakers to see what it does

Be aware: XLR and TRS are fundamentally the same thing. Buying a new cable is unlikely to fix your problem (just read some of the other posts)

The y cables are for my A2 soundcard from my laptop to the mixer and then from my 3.5mm stereo jack desktop to the mixer and then the main outs go into my monitors…so I’m sure I have the right cables! Does that make sense?

Right, I must be a bit stupid, because I can’t work out what goes where.

You have:

A2 soundcard →

Y cable →

Mixer →

and

Internal Soundcard (3.5 mm stereo) →

??? →

Mixer

I still don’t get the Y-cable, unless the soundcard only has a stereo output? I also don’t get how you’re getting from the 3.5mm to the mixer.

Is the single end of the y-cable at the soundcard, or at the mixer?

alright ill try to explain it better…i bought that little mixer so i could use the KRKs on my laptop and desktop. I use the A2 on my laptop and the output on that needs to be split so i use the y-cable to plug in a left and right cable into the mixer line 2/3. Then from the desktop i use a 3.5mm converter into 1/4 TRS, plug the TRS y-cable into that and then use two TRS cables to plug into the left and right ports in the mixer line 4/5. Then i use TRS from the left speaker and plug it into the main out of the mixer and the same with the right.

yes the single end of the y-cable is in the soundcard.

Ah. There’s two Y-cables involved, that’s where I was getting confused, thanks for clearing it up.

So, the problem is in the laptop → a2 → mixer → speakers chain? I think it’s the splitter that’s likely to be the issue (given that you have to connect only the Tip and Ring of the Tip Ring Sleeve to get correct sound).

Is there more to the model number of your soundcard than A2? I can’t find a reference to it that I think is the right thing. Even a make would be handy.

yeah sorry man its the native instruments audio 2 dj lol

Which only has 6.5mm stereo outs. Weird.

Like I said, I’d suspect the splitter. I haven’t had a lot to do with splitters, but every time I’ve tried to use one I’ve had issues. Is a stereo 6.5 → twin mono 6.5 splitter the same thing as a TRS 6.5 → twin TRS 6.5?

haha to be honest i have no idea lol im super lost

I actually just got rokit 6’s. Im setting them up in about a week, I really hope this doesnt happen to me. I am planning on connecting the speakers to my computer through my s4 (using it as a soundcard). I bought 2 XLR to TRS cables so hopefully those are gunna provide some good balanced sound without the snap crackle pops. wish me luck lol

yeah ive had no problems with my speakers since i stopped using my s4 as the soundcard lol hopefully you wont have any problems! they are amazing speakers tho…i love them

I couldnt read the whole thread, whatd you use instead of the S4 as your soundcard?