Masters Level Meter Mapping To PFL
Hello again.
Can be activated by mapping, or another option, the two VU meters of the masters of each channel, to see these in the PFL?
I Akiyama Tempus controller, and Traktor Pro 2.10.1 Original.
The closest thing I’ve found on the internet about this issue is, but really your explanation does not solve my problem.
Thanks again for your help!
Add Out > Mixer > Meters
There you can choose from:
-Master Out Level (Left)
-Master Out Level (Right)
-Master Out Level (Left+Right)
As for the PLF you can find that command under the ‘Mixer’ group as well:
Add In > Mixer > Monitor Cue
Uhm thanks for your fast reply!
I found these options at Controller Manager, but, you know what values I put in each or how I can active them?
Check out this DJ Techtools tutorial on basic midi mapping! That will help you to figure out what does the ‘learn’ button do and how you can set different interaction modes and different deck assignments for each of commands in your mapping.
The PFL should be strait forward since you can press the button on the unit to send signal in to Traktor and MIDI Learn it but you can’t do a same for VU-meter LED’s. I’ll see if I can find some of their factory Traktor maps and try extract the information about what CC values they used. (this are usually found in the User Manual as well)
Thank you so much for your reply!
Investigating in your web, and checking one to one all maps, I found this map DJ TechTools - VOXOA C60 for TK2 (4 Track Decks) from another company, Voxoa, but the model is very similar than my Akiyama Tempus.
I installed the maps and this map fix the problem of vumeters!, but some items works wrong… Im seeing the light thanks to your great site!
Those are the 2 mappings:
config2.10 > works everything well, but not the vu meters problem
VOXOA_C60_for_TK2_(4_Track_Decks) > the map that I found from VOXOA controller… the vu meter works with this map but many things doesnt work (play buttons, cue, etc).
config 2.10.tsi
http://www84.zippyshare.com/v/4VCOkese/file.html
VOXOA_C60_for_TK2_(4_Track_Decks).tsi
http://www84.zippyshare.com/v/pIitlYh9/file.html
Im trying to find the parameter from VOXOA map for add it to the old map…
I looked in both of those mappings and all MIDI notes seems to match 100%… Which means that there shouldn’t be a possibility that one function works in first mapping but fails in the other.
Take example of the play button - the MIDI note in this button is C1 (in both mappings) and it’s associated with a corresponding channel (Ch01=Deck A, Ch02=Deck B, Ch03=Deck C, Ch04=Deck D)
The VU-Meter assignments are also matching.
Could it be that you use ‘ALL PORTS’ setting at MIDI in-port and out-port?
Thank you again!
Yes, I use IN PORTS = all ports and OUT PORT = all ports … In DEVICE TARGET = Focus
This is wrong? What should be the perfect configuration here?
I tried all combinations with NONE, ALL PORTS and TEMPUS, and everything still same 
The VOXOA mapping works with all combinations too :S
That’s a bummer. All Ports means that your mapping is “opened” to all MIDI signals that are going in and out of your computer, but, since it doesn’t matter in case of porting to TEMPUS directly than this stays enigma to me 
Sorry I couldn’t be of more help but I don’t have all the controllers in the world to troubleshoot it further (but would love to)
Your best bet then is to stick to working VU-Meter one and try to map remaining functions. It could be possible that your controller is maybe set to different midi channels or something (in the firmware) - you can use midi learn function in Traktor to assign buttons and see if MIDI assingnments (Note or CC) matches to ones already existing in the mapping.
Don’t know if this is any help, but on the Denon gear, the meter LED’s are outside the mappable range, and can’t be remapped. Could this be the issue on this topic too??
You can map the PFL to another LED capable controller which will take another USB port..
Sent from my SM-G900F using Tapatalk
Thank you very much for your big help and your time on this problem…
Really I dont know what do… the strange thing is that the VU meter mapping works with the other controller…
Please, if someone comes up with an idea or action, please let me know.
Big thanks.
I try to configure with SETUP wizard from 0, I change the function EXTERNAL in mixing mode, and the vu meter always is ON (works), but prelistening doesnt work, always on.
Stewe, so, do you have any idea more for try here?
Im very desesperated
Hi maybe you can try this & remap for your gear DJ TechTools - Maschine vu metter
Thank you for your reply and your attempt. I try this map but none control works here
There is a suggestion I posted earlier in this thread. Did you try to map remaining features on the working VU-meter one?