Recording in Traktor Scratch Pro 2 with Korg Zero 4
Hello everyone! 
I hope someone give me a help…how can i record the ZERO 4 master output on the Deck D of traktor in external mode without external sound card but using the internal mixer’s sound card…?
there are 10 images, click to next…
RCA from the record out to channel D line input ?
Can you find the channel for the master in the drop down menu for the audio in for the mix recorder ?
I used to have this mixer but I forgot how I recorded my sets.
I want to record without external sound card
I all I know is that in Zero edit I tried to change all 8 channels in Bus & Master and input routing of the D-channel of traktor but nothing …
[ATTACH=CONFIG]19170[/ATTACH][ATTACH=CONFIG]19171[/ATTACH][ATTACH=CONFIG]19172[/ATTACH]
Do you have a Mac? If so, by far the easiest way to record your mix and also control 4 channels of audio (in case you 'd like to use that deck) is to route an RCA to 3.5mm cord from your mixer output to your computer audio in, and record using Audacity.
I say this after owning a Korg Zero 4 for years and always being not thrilled about giving up 1 channel to record mixes.
Can confirm. Audacity. That’s the way I did it.
in Traktor’s Input window, set your mixer’s USB master out channel (on my X600 mixer it’s USB 7/8) on channel D input.
in Traktor’s Recording window, set recording to External and Channel D.
cheers
yep. any mixer with a soundcard just set channel 4 as a recording channel and you are good to go.
HI Bruiser Smith , yes I have a IMac intelcore 2 Duo and i try the solution with Audacity and it’s good…thanks 
but…I also take this opportunity that you have had the mixer and I ask you: if I want to use only the Zero 4 internal sound card I have to give strength 1 mixer channel to record the master output on traktor deck D?
how can I do?..because in the Zero Edit and Traktor imput I try but nothing…you can send a screen?
HI SlayForMoney …I have tried to do as you say…but I change set in the Zero Edit and Traktor imput but nothing …
you see my screen?..
Sorry for my bad english…(from google translator
)
your pictures are too small 
please look at this thread if you have trouble understanding how internal routing should be done for recording in Traktor: http://www.denondjforums.com/forums/viewtopic.php?f=57&t=18557&p=141037
And you look this: ImageShack - Best place for all of your image hosting and image sharing needs …it’s my first post and they aren’t small…
I have trouble understanding how internal routing should be done for recording in Traktor WITH ZERO 4 Mixer and set the ZERO EDIT program…
In ZERO EDIT make sure the outputs, pre-eq read:
Ch1=1L+1R
Ch2=2L+2R
Ch3=3L+3R
Ch4=4L+4R
MASTER= 8L+8R (or any other left channel, don’t know how many ch ZERO4 has? 16?)
Under recording set the ch to the value assigned for master (so 8L+8R or different)
ZERO8 printscreen is confusing me 
ZERO8 printscreen is confusing me [/QUOTE]
…you’re right, only now I understand how to have the screen of Zero4
you say that?: ImageShack - Best place for all of your image hosting and image sharing needs
but does not work…
I tried to change this way: ImageShack - Best place for all of your image hosting and image sharing needs
and i change all the imput in traktor: ImageShack - Best place for all of your image hosting and image sharing needs
and I record with ( 9: zero4 in 8 and 10: zero4 in 9) but only if I have activated the sampler and FX on all 4 channels…
If I want to use this effect: ImageShack - Best place for all of your image hosting and image sharing needs only on the channel 2 (for example) the other channels that I have unchecked are not recorded
